Abocom GFM560 User Manual

GSM Ready

56K FAX/MODEM

PC Card

Quick Installation

Guide

M73-APO02-110

INTRODUCTIONS

The GSM-Ready 56K Fax/Modem PC Card provides

you both fax and data connection via GSM cellular
networks. With this combo communication PC Card, you
can always keep in touch with via fax or Email and gain
access to the Internet over GSM.

GSM Kit Contents

♦ One GSM driver disk
♦ One GSM cable for Ericsson or Nokia handies
♦ This GSM Installation Guide

System Requirements

♦ A laptop with 486 CPU or above.
♦ At least 8MB RAM installed.
♦ At least 3MB of free hard disk space
♦ Windows 95/98/ME/ NT 4.x /2000/XP

For Windows NT, Administrator Access is required for

installing the GSM software.

GSM Cellular Phone Requirements

♦ Corresponding services (data, fax and SMS)

included

- 1 -

PC CARD INSTALLATION

Connecting the GSM hand-phone to your laptop

1. Locate the PCMCIA slot of your laptop. Align the
GSM-ready 56K Fax/Modem PC Card toward the
PCMCIA slot.

2. Load “56K Fax/Modem PC Card” driver into your
free drive. Follow the on-screen instruction to finish
the installation. Or refer to the user manual for
details.

Notebook computer

GSM-ready
56K Fax/Mo dem
PC Car d

3. Connect the provided GSM cable to the GSM-Ready
56K Fax/Modem PC Card.

4. Plug in the GSM cable to your GSM hand-phone.

GSM Cable

- 2 -

SOFTWARE INSTALLATION

Installation for Windows 98

1. As soon as the GSM-Ready 56K Fax/Modem

PC Card

Windows will detect the new hardware device
automatically and prompt you the following
message.

2. Insert the device driver diskette into your floppy

drive. Select Search for the best driver for your
device. (Recommended) and click Next.

3. Select Floppy disk drives and click Next.

4. Click Next.

5. When the following window appears, click Finish to

complete the software installation.

is inserted into the PCMCIA slot,

Installation for Windows Millennium

1. Once the PCMCIA Fax Modem 56K PC

is plugged into the PCMCIA slot of your

Card

system, Windows will automatically detect the
device. Select Specify the location of the

driver (Advanced) and click Next.

- 3 -

2. Select Search for the best driver for your device.

(Recommended) and click Next.

3. Click Next.

4. Click Finish to complete the software installation.

Installation for Windows NT

1. Plug the Fax/Modem PC Card into the PCMCIA

slot.

2. Run Windows NT 4.0.

3. Double click the Modem Icon in Control Panel.

4. In the Install New Modem window, press the Next

button to detect the modem automatically.

5. Press the Change button to change the modem type.

6. Press the Have Disk... button.

7. Insert the INF file disk bundled with the fax/modem

PC Card to the floppy drive.

8. Enter the path A:\ and press OK button.

- 4 -