ABB A9 – A/AE75, EK110 – EK1000, AL9 – AL26 Catalog Page
A9 – A/AE75 , EK110 – EK1000, AL9 – AL26
AC & DC operated
UL rated, 4 pole
A9-40-00 A75-40-00 EK175C4P-PL
Across the line
contactors
1
4 Pole – 4 NO power poles
UL general purpose current AC operated DC operated
AC operated DC operated Catalog number List price Catalog number List price
21 21 A9-40-00-84 $ 120 AL9-40-00-81 $ 133
30 30 A16-40-00-84 165 AL16-40-00-81 172
40 40 A26-40-00-84 228 AL26-40-00-81 224
65 65 A45-40-00-84 360 AE45-40-00-86 420
80 80 A50-40-00-84 413 AE50-40-00-86 473
105 105 A75-40-00-84 525 AE75-40-00-86 570
150 150 EK110C4P-1L 743 EK110C4P-PL 953
200 200 EK150C4P-1L 1013 EK150C4P-PL 1238
250 250 EK175C4P-1L 1763 EK175C4P-PL 1988
300 300 EK210C4P-1L 2025 EK210C4P-PL 2280
400 400 EK370C4P-1L 4650 EK370C4P-PL 5010
600 600 EK550C4P-1L 6510 EK550C4P-PL 7005
1000
1 1000 1 EK1000C4P-1L 9000 EK1000C4P-PL 9700
1
4 Pole – 4 NC power poles
UL general purpose current AC operated
AC Catalog List
operated number price
30 A16-04-00-84 $ 165
4 Pole – 2 NO & 2 NC power poles
UL general purpose current AC operated DC operated
AC operated DC operated Catalog number List price Catalog number List price
21 21 A9-22-00-84 $ 120 AL9-22-00-81 $ 133
30 21 A16-22-00-84 165 AL16-22-00-81 172
40 30 A26-22-00-84 228 AL26-22-00-81 224
65 65 A45-22-00-84 360 AE45-22-00-86 420
105 105 A75-22-00-84 525 AE75-22-00-86 570
Coil voltage selection
All AC operated catalog numbers include a 120VAC coil. All DC operated catalog
numbers include a 110VDC coil. To select other coil voltages, substitute the code
from the Coil Voltage Selection Chart for the two digits after the last dash in the
catalog number.
Ex.: A 240V coil is required for an A75 contactor: A75-30-00-80
Auxiliary contact blocks
For additional auxiliary contact blocks, see catalog number explanation on page
1.2. Add $ 20 to list price for each additional auxiliary, and see page 1.18 for
available combinations.
Accessories for EK
Please consult factory.
Coil voltage selection – A contactors
Hz Cntr Volts
type 12 24 48 110 120 125 208 220 240 277 380 415 440 480 500 600
60 A 81 83 84 84 34 36 80 42 86 86 51 53 55
50 A 81 83 84 80 85 86 55
For other voltages, see page 1.26.
Coil voltage selection – EK contactors
Hz Contr. Volts
type 24 48 110 120 125 208 220 240 277 380 415 440 480 500 600
60 EK F G 1 B 2 C Z 3 4 6
50 EK N 1 J 3 M 5
DC EK Y W P Q R T
• For other voltages, consult factory.
• 24 & 48VAC coils are not available for sizes EK550. For these applications, use an
interposing control relay.
Coil voltage selection – AE & AL contactors
Hz Contr. Volts
type 12 24 48 110 125 220 240
DC AE, AL – 81 83 86 87 88 89
For other voltages, see page 1.26.
1 Not UL Listed. IEC value AC1 for 40°C.
Low Voltage Products & Systems 1.13
ABB Inc. • 888-385-1221 • www.abb-control.com 1SXU 000 023 C0201
Discount schedule AA - A9 - A75
Discount schedule AEA - EK110 - EK550
1
Across the line
1
contactors
AF45 - AF75
AC & DC operated
UL rated, 4 pole
Auxiliary contact blocks
For additional auxiliary contact blocks, see catalog number explanation on page 1.8. Add $ 20 to the list price for each
additional auxiliary and see page 1.18 for available combinations. If auxiliary contacts are required for AF50 – AF750
contactors, add $ 40 to the list price and change the 8th & 9th digits in the catalog number from "00" to "11".
4 Pole — 4 NO power poles
General Auxiliary Catalog List
purpose contacts number price
AC1 NO NC
65 0 0 AF45-40-00-70 $ 385
80 0 0 AF50-40-00-70 435
105 0 0 AF75-40-00-70 645
4 Pole — 2 NO - 2 NC power poles
General Auxiliary Catalog List
purpose contacts number price
AC1 NO NC
65 0 0 AF45-22-00-70 $ 385
105 0 0 AF75-22-00-70 645
These contactors (2 NO & 2 NC power poles) can be used for controlling either 2 separate circuits, i.e. 2 loads with 2
separate supplies, or 1 circuit comprising 2 separate loads with 1 single supply (see diagrams below).
When the contactor operates, there is no mechanical overlapping between the NO main poles and NC main poles: Break
before Make.
These contactors (2 NO & 2 NC power poles) are not suitable for a reversing starter or a wye-delta starter or for controlling a
single load from 2 separate supplies.
1 single supply and 2 separate loads
Supply
A1
1
2
A2
R5
R3
R6
R4
Load
Load
7
8
2 separate supplies and 2 separate loads
A1
A2
Coil voltage selection – wide range AC/DC coils
All catalog numbers include a 100-250V AC/DC coil. To select other coil voltages,
substitute the code from the Coil Voltage Selection Chart for the two digits after
the last dash in the catalog number.
Ex.: A 24V coil is required for a AF45 contactor: AF45-22-00-72
Coil voltage selection – AF50 to AF75
AC/DC VOLTS, 40 - 60 HZ
24 - 60 DC 20 - 60 DC 48 - 130 AC/DC 100 - 250 AC/DC
68 1 72 2 69 70
"Main" supply
"Back-up"
supply
R5
R3
1
R6
R4
2
Load
Load
7
8
1 AF400 – AF750, DC only.
2 AF50 – AF300, DC only.
1.14 Low Voltage Products & Systems
1SXU 000 023 C0201 ABB Inc. • 888-385-1221 • www.abb-control.com
Discount schedule AA - AF45 - AF75
Loading...