ABB ACS880 Brochure

—

LOW VOLTAGE AC DRIVES

ABB industrial drives

ACS880 regenerative drives, 2.2 to 3200 kW

ACS880 regenerative drives are suitable for applications with cyclic or continuous braking. Regenerative drives are capable of recovering braking energy and feeding it back to the network. The drive package includes everything needed for regenerative operation.

Capture energy instead of wasting it

Energy savings

With regenerative functionality, braking energy is fed back to the supply network so that it can be utilized by other equipment. Compared to mechanical or resistor braking, which waste braking energy as heat, regenerative operation offers significant savings in energy consumption and cooling.

Minimized downtime

Regenerative drives ensure reliable operation in unstable supply network conditions. The drive’s active supply unit is able to boost output to guarantee full motor voltage even when the supply voltage is below nominal.

Optimized cost and space

Everything needed for regenerative operation, such as an active supply unit and a line filter, is included with the drive. As no external braking devices are needed, the installation footprint is reduced, as well as the time needed for engineering and assembly.

Maximized motor performance and efficiency

ABB’s direct torque control (DTC) provides precise speed and torque control for maximum motor performance and efficiency. The drive's voltage boost capability also improves motor efficiency – with a higher voltage, the same power is achieved with less current.

Technical data

Key features

ACS880-11 wall-mounted regenerative drives

Power range 2.2 to 110 kW

Voltage range 3-phase, 380 to 500 V

Enclosure IP20, IP21 (as standard) and IP55. Flange

mounting with IP55 back side protection as an

option.

ACS880-14 regenerative drive modules

Power range 110 to 400 kW

Voltage range 3-phase, 380 to 690 V

Enclosure IP20

ACS880-14 regenerative drive module packages

Power range 160 to 2200 kW

Voltage range 3-phase, 380 to 690 V

Enclosure IP00

ACS880-17 cabinet-built regenerative drives

Power range 45 to 3200 kW

Voltage range 3-phase, 380 to 690 V

Enclosure IP22 (as standard), IP42 and IP54

— Speed and power curves in cyclic operation

Speed

Possibility to regenerate 100% of power continuously

Everything for regenerative operation included in a compact package

Designed for easy installation.

Easy commissioning

No need to set extra parameters for the active supply unit.

Low harmonic content

Total harmonic current distortion is typically <3% in nominal situation and undistorted network. Fulfills harmonic recommendations, such as IEEE 519, IEC 61000-3-2, IEC 61000-3-12 and G5/4.

Unity power factor

Possibility also for network power factor correction.

Voltage boost

Guarantees full motor voltage in all conditions and can also be utilized to overcome a voltage drop caused by long supply or motor cables or output filters. Voltage boost capability may allow a smaller motor to be used.

Video playlist: ACS880 how-to videos

Power

Nine-year maintenance interval

Factory-tested solution for high reliability

All ACS880 drives are tested at maximum

Regenerative drive animation

temperature with nominal loads.

—

For more information please contact your local ABB representative or visit :

www.abb.com/drives www.abb.com/drivespartners new.abb.com/drives/regenerativedrives

—

We reser ve the right to m ake techni cal chan ges or modif y the contents of this document without pr ior notice. With re gard to purc hase orders, the agreed part iculars shal l prevail . ABB does not accept any responsibility whatsoever for potential errors or possib le lack of information in this docume nt.

We reser ve all right s in this doc ument and in the subjec t matter and ill ustrations co ntained therein. Any rep roduct ion, disclosure to third pa rties or utilizati on of its

3AUA0 000230 289 REV A EN 31 .05.201 8