Guide 130005
Guide #:
Date:
August 18, 2010
Revised:
November 13, 2013
Purpose:
The purpose of this guide is to inform a user on the basic usage of the
VISIX IP Setup Utility.
VISIX IP Setup Utility Quick Guide
130005-1
1 INTRODUCTION ......................................................................................................... 1
2 DOWNLOADING AND INSTALLING THE VISIX IP SETUP UTILITY ...................................... 2
2.1 DOWNLOADING THE VISIX IP SETUP UTILITY ............................................................................................ 2
2.2 INSTALLING THE VISIX IP SETUP UTILITY .................................................................................................. 2
3 USING THE VISIX IP SETUP UTILITY ............................................................................ 2
3.1 STARTING THE VISIX IP SETUP UTILITY .................................................................................................... 2
3.2 DETECTING CAMERAS WITH THE VISIX IP SETUP UTILITY .............................................................................. 2
3.3 CONFIRM/CHANGE THE IP ADDRESS ASSIGNED TO YOUR VISIX IP CAMERA ...................................................... 3
3.4 CONFIGURING SETTINGS FOR YOUR VISIX IP CAMERA ................................................................................. 4
3.5 CONFIRM ADVANCED OPTIONS FOR YOUR VISIX IP CAMERA ........................................................................ 5
3.6 SET/CONFIRM THE SUB-STREAM SETTINGS FOR YOUR VISIX IP CAMERA ......................................................... 6
4 LIVE VIDEO PREVIEW MODE ....................................................................................... 7
4.1 LIVE VIDEO PREVIEW MODE .................................................................................................................. 8
4.2 LIVE VIDEO PREVIEW – CCD SETTINGS ..................................................................................................... 9
5 CONTACT INFORMATION .......................................................................................... 10
1 Introduction
This quick guide will instruct a user on how to correctly install, run and operate the VISIX
(VISIX) IP Setup Utility.
The VISIX IP Setup Utility is an application designed to streamline the process of locating and
assigning VISIX brand cameras to VIGIL Server camera channels.
Visit our webpage for more info at: http://www.3xlogic.com
3xLOGIC Inc. Doc# 13111317 Page 1 of 10
2 Downloading and Installing the VISIX IP Setup Utility
2.1 Downloading the VISIX IP Setup Utility
To download the VISIX IP Setup utility, please visit the below link:
3xLOGIC Public FTP
After the webpage loads, select Support Tools.
From the Support Tools menu select VSXIPSetup file to begin your download.
2.2 Installing the VISIX IP Setup Utility
The VISIX IP Setup Utility does not need to be installed like a traditional software
application.
Simply open your finished download and the VISIX IP Setup Utility will run without an
installation process.
3 Using the VISIX IP Setup Utility
3.1 Starting the VISIX IP Setup Utility
Proceed to your default download destination/folder and double click on the VSXIPSetup
(version number).exe file. This will launch the VISIX IP Setup Utility where you will be
presented with the main screen (pictured in next section.)
3.2 Detecting Cameras with the VISIX IP Setup Utility
The Utility searches for any VISIX IP cameras currently connected to your network.
From here you can discover and change any of the IP Addresses assigned to any of
your VISIX IP cameras.
Click on Detect Online Devices/ Change IP Address to proceed to the Online Devices
window.
Visit our webpage for more info at: http://www.3xlogic.com
3xLOGIC Inc. Doc# 13111317 Page 2 of 10
3.3 Confirm/Change the IP Address assigned to your VISIX IP camera
After clicking Detect Online Devices/ Change IP Address on the main page you will be
taken to the Online Devices window.
To select a device, simply click on the desired device in the generated menu under the
Select Online Devices area.
To change an IP Address for any of your VISIX cameras from the Detect Online Devices
window, click on the Change IP Address button. Notice the fields under the Configure
IP Address area will un-grey to allow for manual editing of camera IP addresses as well
as other settings(highlighted below.)
From here you can view and change:
IP Address
Subnet Mask
Password
Device Port
Most of this information is pre-populated by your system.
It is important that you click on Save IP Address after you view/change any of your
settings.
Now click on OK to confirm that your settings have been saved.
Click on Next to view additional settings for your cameras. This will bring you back to
the main screen pictured in Section 3.2 Detecting Cameras with the VISIX IP
Setup Utility from which you can access basic and advanced camera options.
Visit our webpage for more info at: http://www.3xlogic.com
3xLOGIC Inc. Doc# 13111317 Page 3 of 10
Loading...