Technical Data Specication
3M
™
PELTOR™ WorkTunes™ Pro Headset
Product Description
The 3M™ PELTOR™ WorkTunes™ Pro Headset helps protect you from potentially harmful
workplace noise while at the same time enjoy listening to the built in FM or AM/FM radio.
The built-in antenna, fast digital tuning and ability to store stations makes the hearing protector
exible and easy to work with.
Key Features
• High attenuating hearing protector
• FM or AM/FM Radio headset with built-in antenna
• Digital station search
• Voice guided menu system with announced frequencies
• Store up to 5 stations
• 3.5 mm listen only stereo input (limited to 82 dB) for connection to external devices
• (e.g. cell phone, two-way radio, Ipod).
• Auto power o, the headset will turn o after 4 hrs of non-use to save battery
• Low-battery warning at low battery level
• To reduce the corrosion caused by sweat the electronics are located in the outer part of the cup
• Available in both in headband and helmet attached versions (black).
Applications
3M™ PELTOR™ WorkTunes™ Pro Headset with built-in FM or AM/FM receiver can be used in noisy
industrial sites as well as farming or landscaping activities.
Standards and Approvals
3M Svenska AB hereby declares that this 3M™ PELTOR™ Headset is in compliance with the
essential requirements and other provisions set out in the appropriate directives. Thereby they full
the requirements for CE marking.
Hereby, 3M Svenska AB declares that the radio equipment type [broadcast radio receiver] is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available
at the following internet address: http://www.3M.com/peltor/doc
The product has been tested and approved in accordance with [EN 352-1:2002 / EN 352-3:2002,
EN352-8:2008].
Notied Body Statement of Opinion oered by:
PZT GmbH, An der Junkerei 48 F, D-26389 Wilhelmshaven, Germany. Notify body #1974
In the box
1 x Headset
2 x AA batteries
1 x User Instruction
Standard Models
3M™ PELTOR™ WorkTunes™ Pro FM Headset
FM
Hearing protection
with built-in FM radio
3M™ PELTOR™ WorkTunes™ Pro AM/FM Headset
Hearing protection
with built-in AM/FM radio
Hearing protection
with exte rnal audio input
Hearing protection
with exte rnal audio input
Article number Description Legacy 3M ID SAP ID
HRXS220A 3M™ PELTOR™ WorkTunes™ Pro FM Radio Headset, black, headband UU004690697 7100088416
HRXS220P3E 3M™ PELTOR™ WorkTunes™ Pro FM Radio Headset, black, helmet attachment UU004690705 7100088417
HRXS221A-NA 3M™ PELTOR™ WorkTunes™ Pro AM/FM Radio Headset, black, headband UU004690671 7100089367
HRXS221P3E-NA 3M™ PELTOR™ WorkTunes™ Pro AM/FM Radio Headset, black,helmet attachment UU004690689 7100089369
HRXS221A 3M™ PELTOR™ WorkTunes™ Pro AM/FM Radio Headset, black, headband UU004690713 7100089368
HRXS221P3E 3M™ PELTOR™ WorkTunes™ Pro AM/FM Radio Headset, black, helmet attachment UU004690663 7100089440
Accessories
Article number Description Legacy 3M ID SAP ID
HY220 3M™ PELTOR™ HY220 Hygiene Kit UU008049353 -
FL6CE/1 3M™ PELTOR™ FL6CE/1 3.5 mm Cable XH001676952 7000108359
HY100A 3M™ PELTOR™ HY100A CLEAN HYGIENE PAD XH001651351 7100064410
Technical data specications
Materials: Headband HRXS220A, HRXS221A, HRXS221A-NA
Headband (Stainless steel, PVC, PA)
Headband wire (stainless steel)
Two-point fastener (POM)
Cushion (PVC foil and PUR foam)
Foam liner (PUR foam)
Cup (ABS)
Latch (PA)
On/O/Mode button (TPE)
[+] button (TPE)
[-] button (TPE)
Helmet attachment HRXS220P3E, HRXS221P3E, HRXS221P3E-NA
Cup supporting arm (stainless steel)
Battery type: 2xAA batteries (Alkaline)
Operating time: Approximately 40 hours of battery lifetime
Net weight (batteries incl.): WorkTunes Pro FM HRXS220A (headband) = 351g
WorkTunes Pro FM HRXS220P3E (helmet attachment) = 369g
WorkTunes Pro AM/FM HRXS221A (headband) = 353g
WorkTunes Pro AM/FM HRXS221P3E (helmet attachment) = 371g
Operating temperature: -20°C (-4°F) to +55°C (131°F) (battery dependent)
Storage temperature: -20°C (-4°F) to +55°C (131°F)
Shelf life: 5 years excl. batteries
Wired connectivity: 3.5mm listen-only stereo input jack (limited to 82 dB)
Use limitation: Never modify or alter this product
Attenuation Europe
HRXS221A and HRXS220A EN 352-1:2002
Frequency (Hz) 125 250 500 1000 2000 4000 8000
Mean Attenuation (dB) 17.0 24.0 29.5 36.9 3 7.3 3 9.3 35.4
Std. deviation (dB) 3.2 2.0 2.6 3.3 4.9 3.2 3.9
Assumed Protection Value (dB) 13.8 22.0 26.9 33.6 32.4 36.1 31.5
SNR=32 dB H=34 dB M=29 dB L=22 dB
HRXS221P3E and HRXS220P3E EN 352-3:2002
Frequency (Hz) 125 250 500 1000 2000 4000 8000
Mean Attenuation (dB) 16.6 22.0 2 9.1 3 6.3 36.4 3 8.7 34.2
Std. deviation (dB) 2.7 2.2 2.9 3.4 3.9 4.2 4.0
Assumed Protection Value (dB) 13.9 19.8 26.2 32.9 32.5 34.5 30.2
SNR=31 dB H=33 dB M=28 dB L=21 dB