Table of Contents
Section 8 – Table of Contents
3M™ Forsus™ Class II Correctors .............................8.2
™
3M
Forsus™ Fatigue Resistant Device...................8.3
™
3M
Unitek™ Temporary Anchorage Device
(TAD) System ................................................................. 8.4
3M™ AlastiK™ Force Products .................................. 8.5
™
3M
AlastiK™ Lingual Ligatures ..............................8.6
™
3M
Mini-StiK™ System ........................................... 8.7
Elastics .................................................................... 8.14
Archwire Hooks and Stops ....................................8.15
Gurin Auxiliaries .................................................... 8.16
Intraoral
Products
8
Nitinol Coil Springs .................................................8.17
Retraction Springs ..................................................8.18
T Springs ................................................................. 8.19
Rotation Springs .................................................... 8.19
™
3M
Unitek™ MIA Mobile Interarch System ....... 8.20
Preformed Lingual Arches .................................... 8.21
Expansion Screws ..................................................8.22
8.2
Intraoral Products
Forsus™ Class II Correctors
You can provide a proven, efficient, esthetic Class II correction treatment choice
for your patients – one that works 24/7 with no patient compliance required.
Forsus Class II Correctors are an effective alternative to headgear and elastics that
can be added at any time, with or without molar bands. It’s easy to see why more
than one million patients have used Forsus appliances in treatment, with beautiful,
predictable results.
Forsus Class II Correctors are a study in efficiency that eliminates
time-consuming laboratory setup. Attach the Forsus appliance to the
upper molars and lower arch, creating a mesial force on the lower arch
and a distal force on the upper arch. Long-lasting, consistent forces
mean a more predictable outcome for your patients.
Product Benefits:
• Esthetic – no more headgear
• Out-of-the-box solution – no labs required
• Use with or without molar bands
• Efficient treatment that works 24/7
The Forsus Class II
Corrector is fatigue
resistant to perform reliably
throughout the course of treatment.
Best of all, as an intra-oral corrector,
it is out of sight, making it your choice
for esthetic Class II correction.
The L-pin module allows for more
flexible installation options and
movement in the mouth. It can be
used with a gingival or occlusal
headgear tube. The left and right
sides are universal. It is also used
with the Forsus Wire Mount,
permitting installation without a
molar tube.
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588
Forsus™ Fatigue Resistant Device
Intraoral Products
8.3
Kits (see contents chart)
5-Patient Kit 885-141 885-121
20-Patient Kit 885-142 885-122
1-Patient Kit
All 1-Patient Kits include 2 spring modules (EZ2 or L-pin), 1 right push
rod, 1 left push rod, and 2 split crimps
1-Patient Kit, Push Rod X-Short (22 mm) 885-150 -
1-Patient Kit, Push Rod Short (25 mm) 885-143 885-126
1-Patient Kit, Push Rod Medium (29 mm)
1-Patient Kit, Push Rod Large (32 mm) 885-145 885-128
1-Patient Kit, Push Rod X-Large (35 mm) 885-146 885-129
1-Patient Kit, Push Rod XX-Large (38 mm)
Reorder Packs Unit Left/Right
Spring Modules
EZ2 Spring Modules - Left 5/pk L 885-148
EZ2 Spring Modules - Right
L-Pin Spring Modules 5/pk 885-100
L-Pins 10/pk 885-110
Push Rods
Push Rod XS (22 mm)
Push Rod XS (22 mm)
Push Rod Short (25 mm) 5/pk L 885-111
Push Rod Short (25 mm) 5/pk R 885-112
Push Rod Medium (29 mm) 5/pk L 885-113
Push Rod Medium (29 mm) 5/pk R 885-114
Push Rod Large (32 mm) 5/pk L 885-115
Push Rod Large (32 mm) 5/pk R 885-116
Push Rod XL (35 mm) 5/pk L 885-117
Push Rod XL (35 mm) 5/pk R 885-118
Push Rod XXL (38 mm), no stop
Push Rod XXL (38 mm), no stop
, no stop
, no stop
5/pk R 885-149
5/pk L 885-009
5/pk R 885-010
5/pk L 885-107
5/pk R 885-108
EZ2
Module
885-144 885-127
885-147 -
L-Pin
Module
Part
Number
Requisites for Proper Installation of
Forsus Correctors
Stainless Steel Archwires Section 6
.017 x .025 in. .018 Slot Brackets
.019 x .025 in. .022 Slot Brackets
Steel-ligated lower cuspid brackets Section 6
Lower archwire cinched back distal to buccal tube
Negative torque in lower anterior brackets of
at least -5° Sections 1, 3
or
Steel-ligated lower arch Section 6
Specifically For the EZ2 Module:
Buccal tube with a buccally-offset occlusal
headgear tube
Also Consider
Gurin Lock distal to canine Section 8
Weingart Pliers for Installation Section 11
Cutters for L-Pin Trimming Section 11
Kit Contents 5-Patient Kit 20-Patient Kit
Spring Modules L-Pin EZ2 L-Pin EZ2
EZ2 Modules - 5 L, 5 R - 20 L, 20 R
L-Pin Modules 10 - 40 -
L-Pins 16 - 50 -
Push Rods
X-Short (22 mm) - 1 L, 1 R - 5 L, 5 R
Short (25 mm)
Medium (29 mm)
Large (32 mm)
X-Large (35 mm)
Auxiliaries
Split Crimps 16 16 50 50
Measurement
Guides 2 5 5 20
1 L, 1 R 1 L, 1 R 5 L, 5 R 5 L, 5 R
1 L, 1 R 2 L, 2 R 5 L, 5 R 5 L, 5 R
2 L, 2 R 1 L, 1 R 5 L, 5 R 5 L, 5 R
1 L, 1 R - 5 L, 5 R -
Section 4
Auxiliaries Unit Part Number
Forsus Wire Mount .018 10/pk 885-151
Forsus Wire Mount .022 10/pk 885-152
Forsus Reactivation Spacer 10/pk 885-200
Split Crimps 50/pk 885-203
Push Rod Measurement Guide 5/pk 807-014
Training Materials
Forsus Fatigue Resistant Device Treatment Guide
Forsus Correctors EZ2 Module Installation CD 012-190
Consultation Tools
Forsus EZ2 with Clarity
Forsus EZ2 with SmartClip™ Brackets 600-233
Forsus Patient Brochure 016-963
™
Advanced Brackets 600-242
Part
Number
012-264
Part
Number
3M.com/ortho 3M Oral Care Orthodontic Product Catalog 2020
8.4
Intraoral Products
Unitek™ Temporary Anchorage Device (TAD) System
Auxiliary Products
Unitek™ Temporary Anchorage Device
(TAD) System
Implants
6 mm (504-006)
8 mm (504-008)
10 mm (504-010)
Insertion Instruments
Unitek™ TAD Straight Driver (504-301) Adapter Included
™
Unitek
TAD Straight Adapter O-Ring Pk (504-303) (Red) 10/Pk
™
Unitek
TAD Contra Angle Driver (504-315) Includes (1) Adapter
(504-316) (Introduced by Dr. Jason B. Cope)
Unitek™ TAD Contra
Angle 3.5 mm
Adapter (504-316)
Unitek™ TAD Contra
Angle 10.5 mm
Adapter (504-317)
Unitek™ TAD Contra
Angle 17.5 mm
Adapter (504-318)
Unitek™ Temporary Anchorage Device (TAD) Implants
Item Part Number
Unitek TAD – 6 mm* 504-006
Unitek TAD – 8 mm* 504-008
Unitek TAD – 10 mm* 504-010
*Item provided in sterile packaging.
Unitek™ Temporary Anchorage Device (TAD)
Drivers, O-Rings and Adapters
Item Part Number
Unitek TAD Straight Driver 504-301
Unitek TAD Straight Adapter O-Ring Pk 504-303 (Red)
Unitek TAD Contra Angle Driver 504-315
Unitek TAD Contra Angle 3.5 mm Adapter 504-316
Unitek TAD Contra Angle 10.5 mm Adapter 504-317
Unitek TAD Contra Angle 17.5 mm Adapter 504-318
Unitek
TAD Contra Angle Adapter O-Ring Pk
504-319 (Black)
Unitek™ TAD Contra Angle Adapter O-Ring (504-319)
(Black) 5/Pk
™
Unitek
TAD O-Cap (504-201)
(Designed by Dr. Jason B. Cope)
Includes (1) Unitek™ TAD O- Cap
Elastic Ring (504-202)
Auxiliary Products
Unitek™ TAD Constant Force Coil Springs
1.75 mm
3 mm
6 mm
8 mm
(aTADchments™ designed by
Dr. Jason B. Cope)
• Innovative locking eyelet
• Three constant force levels
(150 g, 200 g and 250 g)
• Four lengths
Unitek™ TAD O-Cap
Elastic Ring
(504-202) (Black)
Unitek™ Temporary Anchorage Device (TAD) O-Caps
Item Part Number
Unitek TAD O-Cap 504-201
Unitek TAD O-Cap Elastic Ring 504-202 (Black)
™
Unitek
Temporary Anchorage Device (TAD)
Constant Force Coil Springs
Item Pack of 10
Unitek TAD Coil Spring 1.75 mm Light Force (150 g) 504-2221
Unitek TAD Coil Spring 1.75 mm Medium Force (200 g)
Unitek TAD Coil Spring 1.75 mm Heavy Force (250 g)
Unitek TAD Coil Spring 3 mm Light Force (150 g) 504-2231
Unitek TAD Coil Spring 3 mm Medium Force (200 g) 504-2232
Unitek TAD Coil Spring 3 mm Heavy Force (250 g) 504-2233
Unitek TAD Coil Spring 6 mm Light Force (150 g) 504-2261
Unitek TAD Coil Spring 6 mm Medium Force (200 g) 504-2262
Unitek TAD Coil Spring 6 mm Heavy Force (250 g) 504-2263
Unitek TAD Coil Spring 8 mm Light Force (150 g) 504-2281
Unitek TAD Coil Spring 8 mm Medium Force (200 g) 504-2282
Unitek TAD Coil Spring 8 mm Heavy Force (250 g) 504-2283
Part
Number
504-2222
504-2223
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588
Auxiliary Products
AlastiK
AlastiK
Auxiliary Products
Unitek™ TAD
Titanium Bowl
(504-342)
Unitek
(504-501)
™
Force Products
™
Easy-To-Tie Ligatures
Unitek
(504-352)
™
TAD Display Model
™
TAD Lab Analog
Intraoral Products
Unitek™ Temporary Anchorage Device (TAD) Accessories
Item Part Number
Unitek TAD Titanium Bowl 504-342
Unitek TAD Lab Analog 504-352
Unitek TAD Display Model 504-501
8.5
AlastiK™ Force Products
• Not Made With Natural Rubber Latex
• Exciting colors
AlastiK
™
Easy-To-Tie Ligatures
AlastiK Easy-To-Tie Ligatures are designed with a 45˚ bend for easy
and efficient tie-wing hook up. The unique angled shape reduces the
range of movement needed for bracket ligation, improving/decreasing
ligation time.
Choose from 26 fade-resistant colors.
One size fits most twin brackets.
Quantity 100 sticks per pack (1,000 ligatures).
• All colors are fade resistant for a minimum of one month in artificial saliva,
8% ethanol in water, cottonseed oil and carbonated citrated sodas.
AlastiK Easy-To-Tie Ligature
* 50 sticks of 24 colors
** 20 sticks of 24 colors
Clear 406-870
Gray 406-871
Smoke 406-872
Light Blue 406-873
Dusky Blue 40 6-874
Tea l 406-876
Lavender 406-877
Navy Blue 406-878
Hot Red 406-879
Kelly Green 406-880
Yel lo w 406-881
Deep Black 406-882
Gold 406-883
Silver 406-884
Purple Metallic 406-885
Blue Metallic 406-886
Green Metallic 406-887
Radical Red 406-979
Screaming Pink 406-980
Plum Crazy 406-981
Orange Blast 406-982
Extreme Green 406-983
Midnight Glow (Glow in the dark) 406-984
Mediterranean Blue 406-985
Obscure 406-986
White 406-988
Mixed Assorted 406-888
Dispensing Box 406-890
Starter Kit with color palette (Large)* 406-990
Starter Kit with color palette (Small)** 406-991
3M.com/ortho 3M Oral Care Orthodontic Product Catalog 2020
8.6
Intraoral Products
AlastiK™ Lingual Ligatures
AlastiK™ Lingual Ligatures, designed for the Incognito™ Appliance System, express the
appropriate force and provide ease of use for the orthodontist and staff.
When used as plain ties, AlastiK Lingual Ligatures apply similar tip control when compared to
overties used with powerchain.* Due to the design of the ligatures, the application is easier
compared to current ligation techniques and provides patient comfort at the same time.
• Not Made With Natural Rubber Latex
• 12 ligatures per stick
• 12 sticks per pack (total 144 ligatures)
406-993
Innovative design for
easy ligating
Replaces overties
Recommended by
90% of doctors
Product Benefits:
• AlastiK Lingual Ligatures express the same force and
apply similar tip control as overties with powerchain.
• The tab designed on the AlastiK Lingual Ligatures
ensures a safe grip and simplifies placement and
handling during the ligation procedure.
• The optimized cross section delivers ideal forces.
Proprietary design for easy
application
Convenient tab enables
secure grip
Easy to see on
gold brackets
*Source: 3M Internal Data
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588
AlastiK™ Practice Enhancers
A Modules
Mini-StiK™ Patient Sticks
AlastiK™ Practice Enhancers
Intraoral Products
8.7
AlastiK™ Color Palette
406-825
A Modules
• Not Made With Natural Rubber Latex
• Injection molded
• Easy to use
• Comfortable to wear
• Packing options:
- AlastiK
™
MiKro-StiK™ System for
unit-of-use dispensing
- Mini-StiK
- QuiK-StiK
™
patient sticks
™
with central ring-grip
- Loose
Mini-StiK Patient Sticks
AlastiK™ Color Dots
• Adhesive backed
• 1 each 25 colors/bag
406-829
Outer A-1 A-2 A-3
Diameter
Inches .125 .094 .110
(mm) (3.2 mm) (2.4 mm) (2.8 mm)
(Bracket) (Full) (Single) (Mini)
• Not Made With Natural Rubber Latex
• A-1 or A-3 modules
• 24 modules per stik
• Injection molded for smooth,
comfortable surface
• Exciting colors
42 StiKs per bag (1,008)
Colors A-1 A-3
Gray 406-381 406-351
Clear 406-382 406-352
Smoke 406-903 406-943
White 406-905 406-945
Light Blue 406-906 406-946
Dusky Blue 406-907 406-947
Teal 406-909 406-949
Lavender 406-910 406-950
Kelly Green 406-916 406-956
Yellow 406-918 406-958
Gold 406-920 406-960
Silver 406-922 406-962
Purple Metallic 406-933 406-973
Blue Metallic 406-934 406-974
Green Metallic 406-935 406-975
417 StiKs per bag
(10,008) A-1
Gray 406-391
Clear 406-392
Colors A-1 A-3
Hot Red 406-936 406-976
Navy Blue 406-937 406-977
Deep Black 406-938 406-978
Assorted 406-924 -
Radical Red 406-221 406-232
Screaming Pink 406-222 406-233
Plum Crazy 406-223 406-234
Orange Blast 406-224 406-235
Extreme Green 406-225 406-236
Obscure 406-226 406-237
Mediterranean Blue
Midnight Glow 406-230 406-239
(Glow in the dark)
406-227 406-238
3M.com/ortho 3M Oral Care Orthodontic Product Catalog 2020
8.8
Intraoral Products
QuiK-StiK
™
Loose Modules
B Modules
QuiK-StiK
• Not Made With Natural Rubber Latex
• A-1 or A-2 modules
• 60 modules per stick
• Central thumb ring
• A-1 is .125 in. (3.2 mm) outer diameter
• A-2 is .094 in. (2.4 mm) outer diameter
17 StiKs per bag (1,020)
Colors A-1 A-2
Gray 406-407 406-408
Clear 406-417 -
Smoke 406-703 -
White 406-705 -
Light Blue 406-706 -
Dusky Blue 406-707 -
Teal 406-709 -
Lavender 406-710 -
Kelly Green 406-716 -
Yellow 406-718 -
Gold 406-720 -
Silver 406-722 -
Purple Metallic 406-733 -
Blue Metallic 406-734 -
Green Metallic 406-735 -
Hot Red 406-736 -
167 StiKs per bag
(10,020) A-1
Gray 406-476
Clear 406-477
Colors A-1 A-2
Navy Blue 406-737 -
Deep Black 406-738 -
Assorted 406-724 -
Radical Red 406-241 -
Screaming Pink 406-242 -
Plum Crazy 406-243 -
Orange Blast 406-244 -
Extreme Green 406-245 -
Obscure 406-246 -
Mediterranean Blue
Midnight Glow 406-250 -
(Glow in the dark)
406-247 -
Loose A-1 Modules – 1,000 per package
• Not Made With Natural Rubber Latex
Colors Force A-1
Clear Medium 406-011
Gray Medium 406-007
Clear Heavy 406-009
B Modules – 100 per package
• Not Made With Natural Rubber Latex
• Injection molded
• 4 sizes
Center to Center B-1 B-2 B-3 B-4
Inches .145 .175 .230 .325
Colors Force (mm) (3.7) (4.4) (5.8) (8.3)
Clear Medium 406-021 406-022 406-023 406-027
Gray Medium 406-091 406-092 406-093 406-094
Clear Heavy 406-024 - - -
See Archwire Products section for coated and uncoated ligature wires and auxiliary ligature tie hooks.
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588
C Modules
Precut Chain Reel
C Modules
Intraoral Products
8.9
• Not Made With Natural Rubber Latex
• Three configurations
• Refer to each product for center to
center measurement
C-1 Short Chain
*C-2 Long Chain
CK Continuous Chain
Packaging options include: bobbins, spools,
and pre-cut lengths.
*C-2 only available in Precut C Module Chains
Precut C Module Chains (Injection molded)
12 module unit-of-use sections (10/pk)
• Not Made With Natural Rubber Latex
C-1 C-2 CK
Center to Center Mandibular Maxillary
Inches .150 .170 .115
Colors Force (mm) (3.8) (4.3) (2.9)
Clear Medium 406-031 406-032 406-035
Gray Medium 406-029 406-030 406-036
Center to Center
Inches .150 .175
Colors Force (mm) (3.8) (4.4)
Clear Heavy 406-033 406-034
Continuous C Module Chain Reel
• Not Made With Natural Rubber Latex
• 3 ft. (91 cm) per reel
• Die-cut chain
• Medium force
Colors Force (mm) (3.6) (2.8)
Clear Medium 406-137 406-869 Package of 4 reels
Gray Medium 406-037 406-669 Package of 4 reels
Clear Medium 406-140 - Package of 40 reels
Gray Medium 406-040 - Package of 40 reels
3M.com/ortho 3M Oral Care Orthodontic Product Catalog 2020
Center to Center C-1 CK
Inches .140 .110
8.10
Intraoral Products
Continuous Chains Bobbin
Elastomeric Ligature with Guard
Continuous Chains Bobbin
• Not Made With Natural Rubber Latex
• 15 ft. (457 cm) per bobbin
C-1 CK
in. .140 .110
Colors (mm) (3.6) (2.8)
Gray 406-611 406-621
Clear 406-612 406-622
Purple
Metallic
Blue Metallic 406-654 406-644
Green
Metallic
Hot Red 406-656 406-646
Navy Blue 406-657 406-647
Deep Black 406-658 406-648
Smoke 406-673 406-623
White 406-675 406-625
Light Blue 406-676 406-626
Dusky Blue 406-677 406-627
Teal 406-679 406-629
Lavender 406-680 406-630
Kelly Green 406-686 406-636
406-653 406-643
406-655 406-645
• Die-cut chain
• Color coordinated bobbin for
easy identification
Distance
Center to Center
• Medium force
• 1 bobbin/pk
Distance
Center to Center
C-1 CK
in. .140 .110
Colors (mm) (3.6) (2.8)
Yellow 406-688 406-638
Gold 406-690 406-640
Silver 406-692 406-642
Radical Red 406-297 406-306
Screaming Pink 406-298 406-307
Plum Crazy 406-299 406-308
Orange Blast 406-300 406-309
Extreme Green 406-301 406-310
Obscure 406-302 406-312
Mediterranean
Blue
Midnight Glow 406-304 406-314
(Glow in the
dark)
406-303 406-313
Elastomeric Ligature with Guard
AlastiK™ Bobbin Dispenser
• Not Made With Natural Rubber Latex
• Holds 16 bobbins
• Removable handle
• Replaceable blade
406-927
Replacement Blade Set
• Replacement Blade Set (2)
406-928
• Not Made With Natural Rubber Latex
• .124 in. (3.1 mm) outer diameter
• Reduces tooth contact with brackets on mandibular teeth
• Injection molded memory material
• Disc dispenser, 10 modules per disc, 10 discs per package
406-430 Clear
406-429 Silver
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588
Separator Modules
S Modules (Separators)
Intraoral Products
8.11
• Not Made With Natural Rubber Latex
• Pre-banding separators
• Three sizes
• Packaging options:
- Loose
- QuiK-StiK
Loose S Modules
• Not Made With Natural Rubber Latex
• Three sizes
• 100/pk*
Outer S1 S2 S3
Diameter Anterior Posterior Posterior
Colors Inches .140 .175 .210
(mm) (3.6) (4.4) (5.3)
Clear 406-081 406-082 406-085
Blue - 406-084 Green 406-083 - -
*Box available upon request
• Thermal sensitive
• Optimal effect when not over-stretched
beyond:
S1 12 mm
S2 15 mm
™
S3 20 mm
SX 15 mm
SX
Posterior
.190 in.
(4.8 mm)
Radiopaque
Dusky Blue
406-086 100/pk
406-087 1,000/pk
QuiK-StiK™ S Modules
• Not Made With Natural Rubber Latex
• 80 modules per stick, 13 sticks/pk
• Two sizes
Colors Inches .145 .175
(mm) (3.7) (4.4)
Gray 406-411 406-410
3M.com/ortho 3M Oral Care Orthodontic Product Catalog 2020
Outer Diameter
S1 S2
8.12
Intraoral Products
K Modules
K Modules
• Not Made With Natural Rubber Latex
• For intermaxillary Class II and
intramaxillary Class III applications
• 100/pk
Colors Force (mm) (10.2) (11.6) (16.5) (21.6)
Clear Medium - 406-051 - -
Gray Medium 406-068 406-074 406-075 -
Clear Heavy - 406-054 - 406-056
Center to Center K-0 K-1 K-2 K-3
Inches .400 .455 .650 .850
KX Modules
• Not Made With Natural Rubber Latex
• Greater force delivery than
K modules
• Designed for intermaxillary application
• Typical application is from a hook on
distal molar to an archwire hook in the
cuspid region
• 100/pk
Colors Force Center to Center KX-1 KX-2 KX-3
Inches .235 .310 .415
(mm) (6.0) (7.9) (10.5)
Clear Medium 406-060 406-057 406-062
Inches .230 .300 .405
(mm) (5.8) (7.6) (10.3)
Gray Medium 406-064 406-059 406-065
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588
Rotation Wedge
Action Line
EZ3 Holder
Rotation Wedge
Labial
Action Line Thread
Intraoral Products
• Not Made With Natural Rubber Latex
• Serves as wedge when archwire is ligated to opposing tie-wings
• Preformed tabs snap over tie-wings
Labial Lingual .010 in. (.25 mm) ligature wire
100/pk 10/pk
Gray Gray
406-043 390-150
8.13
• Not Made With Natural Rubber Latex
• For rotating and extruding teeth,
closing minor space and other
intraoral applications
• Clear polyurethane elastomeric thread
• Self-sealing bobbin
EZ3 Holder
• Not Made With Natural Rubber Latex
• Pre-bonding lingual wire support
• Eliminates need for wax, ligature wire,
floss threader or manual assistance
406-044 10/pk
25 ft. (7.62 m) Bobbin
Diameter
.020 in. (.51 mm) 407-020
.025 in. (.64 mm) 407-025
.030 in. (.76 mm) 407-030
Action Line Tubing
• Not Made With Natural Rubber Latex
• Hollow tubing for tighter knots
• Natural color elastomeric tubing
• Self-sealing bobbin
25 ft. (7.62 m) Bobbin
Diameter
.020 in. (.51 mm) 407-120
.025 in. (.64 mm) 407-125
.030 in. (.76 mm) 407-130
3M.com/ortho 3M Oral Care Orthodontic Product Catalog 2020
8.14
Intraoral Products
People Pack Intraoral Elastics
People Pack Intraoral Elastics
• Made With Natural Rubber Latex
• Coated With Cornstarch
• Precision-cut, surgical-grade latex
• No color additives
• Size and force ratings are clearly
marked on packaging
Sizes (I.D.) 1/8 in. 3/16 in. 1/4 in. 5/16 in. 3/8 in.
(Slack Diameters) (3.2 mm) (4.6 mm) (6.4 mm) (7.9 mm) (9.5 mm)
Pkg. Pack Color
Force Rating* Code Purple Green Red Blue Orange
Light 2 oz.
(56.7 g) 404-116 404-126 404-136 404-146 404-156
Medium-light 3 1/2 oz.
(99.2 g) 404-216 404-226 404-236 404-246 404-256
Medium 4 oz.
(113.4 g) 404-516 404-526 404-536 404-546 404-556
Medium-heavy 5 1/2 oz.
(155.9 g) - 404-426 - - -
Heavy 6 oz.
(170.1 g) 404-616 404-626 404-636 404-646 404-656
Extra-heavy 8 oz.
(226.8 g) 404-716 404-726 404-736 404-746 404-756
✷
❁
▲
●
❖
■
• Cross indexed by color and symbol
• Patient pack illustration allows written
directions on surface
Carlos Pete Gary Greg To m
Dave Dwight Chuck Cliff Will
Cathy Bill Elliot Louie Joe
- Ken - - -
Debbie Bummer Fred Roger George
Gloria Roberto Fran Anna John
Packaging: All Intraoral sizes – 100 elastics per patient pack, 30 packs per box (Total 3,000 elastics)
Sizes (I.D.) 5/8 in. 3/4 in.
(Slack Diameters) (16 mm) (19 mm)
Pkg. Pack Color
Force Rating* Code Aqua Yellow
Light 2 oz.
(56.7 g) 404-166 404-176
Medium-light 3 1/2 oz.
(99.2 g) 404-266 404-276
* Force rating based upon stretching the elastic three times slack diameter
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588
✷
❁
Andy Ernie
Paul Hal
Archwire Hooks and Stops
Adjustable Sliding Yoke
Archwire Hooks and Stops
Intraoral Products
Adjustable Sliding Yoke
8.15
Crimpable
• Light loads
• 2 mm length
• Wall: round .015 in. (.38 mm)
• Split crimpable can be placed
without removing wire
• Use crimping plier or dull
hard wire cutter
• Ideal with Nitinol wire
To Fit Round Wire Crimpable Split Crimpable Weldable
w/Arch
Hook
Inches (mm) 10/pk 100/pk 10/pk 100/pk 10/pk 100/pk
.016/.018 (.41) - - 536-610 517-610 - -
.020 (.51) - - - - - 513-111
.022 (.56) 535-712 515-712 536-620 517-620 532-122 513-121
.025 (.64) 535-732 - - - 532-132 -
.030 (.76) - - 536-730 517-730 532-142 -
.036 (.91) 535-752 515-752 536-740 517-740 532-152 -
.040 (1.02) - - 536-750 517-750 532-162 -
.045 (1.14) - - - - 532-172 513-171
.051 (1.30) - - - - - 513-181
Weldable
• Medium hard temper
• One or two welds to
permanently anchor
• .006 in. (.15 mm) wall
• Choice of two lengths:
Round 2 mm or 1 mm;
Rectangular 2 mm
• Use with extraoral headgear
Stop
w/o Hook
w/Arch
Hook
Stop
w/o Hook
• Clip onto archwire
• Adjust length then crimp
310-200 10/pk
w/Arch
Hook
2 mm length 1 mm length
Stop
w/o Hook
To Fit Rectangular Wire
Crimpable
Wall
Thickness
Inches (mm) Inches (mm) 10/pk 10/pk 100/pk
.016 x .026 (.41 × 66) .012 (.30) 534-720
.018 x .025 (.46 x .64) .013 (.33) 534-710 533-710 516-712
.022 x .028 (.56 x .71) .015 (.38) 534-740 533-740 516-742
Split Crimpable
Inches (mm)
.018 x .025 (.46 x .64) 538-610
.022 x .028 (.56 x .71) 538-740 537-740 518-740
Weldable
Inches (mm)
.016 x .026 (.41 x .66) 531-120
.018 x .028 (.46 x .71) 531-110 530-110 -
w/ Extraoral Hook
.025 in. (.64 mm)
w/Arch
Hook
533-720 516-722
537-610 518-610
- -
Stop
w/o
Hook
3M.com/ortho 3M Oral Care Orthodontic Product Catalog 2020
8.16
Intraoral Products
Gurin Auxiliaries
Gurin Auxiliaries
• Anchor without welding or soldering
• Adjustable
• 1 each
For Archwire Sizes
.014 / .016 in. .018 / .022 in. .028 / .036 in. .038 / .045 in.
(.36 - .41 mm) (.46 - .56 mm) (.71 - .91 mm) (.97 - 1.14 mm)
Auxiliary Description L/R Extra-Small Small Medium Large
Locks
Nuts For replacement - 561-100 561-200 - 561-400
Used as adjustable stops,
tie-back stops, or to activate
coil springs for opening or
closing spaces
- 560-100 560-200 560-300 560-400
Intraoral Hooks For elastics R 563-101 563-201 - 563-401
L 563-102 563-202 - 563-402
Extraoral Hooks For extraoral traction R - 562-101 - -
L - 562-102 - -
Loop Springs For individual tooth
Finger Springs For individual tooth
Retraction
Loops
movement as a push or
pull spring
movement - banded or
unbanded
Eliminates need to bend
retraction loop in archwire
R - 566-201 - L - 566-202 - -
- - 565-200 - -
R - 564-101 - -
L - 564-102 - -
Gurin Lock
Wrenches
• For tightening hexagon
head lock nuts on
Gurin auxiliaries
• Machined from
stainless steel
• Has a knurled grasp
810-001 For extra-small and small lock nuts
810-002 For medium and large lock nuts
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588
Nitinol Coil Springs
Nitinol Coil Springs
Intraoral Products
8.17
Nitinol Open Coil Springs
Length 7" (175 mm)
Packaged 3 per tube
Available in three forces
Nitinol Closed Coil Springs
Length 9 mm and 12 mm lengths,
B Dimension, inner diameter
(arbor) 0.030" (0.76 mm).
Packaged 10 per box. Each
available in three forces.
9 mm
or
12 mm
Opening
Order No.
345-100 0.030" (0.76 mm) Light 100 g
345-200 0.030" (0.76 mm) Medium 200 g
345-275 0.033" (0.84 mm) Heavy 275 g
Description 9 mm
Light 344-150 150 g 346-150 150 g
Medium 344-200 200 g 346-200 200 g
Heavy 344-250 250 g 346-250 250 g
Min.
Inner Diam. (Arbor) Desc.
Force (g) @
12 mm Ext. 12 mm
Force (g) 25 mm (1")
Length Compressed
to 19 mm (0.75")
Force (g) @
24 mm Ext.
Important: Do not expand 9 mm coil to more than 22 mm total
length from eyelet to eyelet or do not twist more than 180˚ (half a
turn) to avoid deformation or significant change in force. A 12 mm
coil spring is recommended for cases which require the spring to
be expanded to 22-36 mm from eyelet to eyelet.
Caution: Not designed for use between upper and lower arches.
3M.com/ortho 3M Oral Care Orthodontic Product Catalog 2020
8.18
Intraoral Products
Retraction Springs
Hi-T II Coil Springs
• 3 ft. (.91 m) self-sealing bobbin
• Stainless steel spring
Hi-T II
Wire Diameter Arbor Diameter
Inches (mm) Inches (mm) Close-Wound Open-Space Wound
.006 (.15) .020 (.51) 341-110 341-111
.022 (.56) 341-120 341-121
.007 (.18) .022 (.56) 341-220 341-221
.008 (.20) .022 (.56) 341-320 341-321
.030 (.76) 341-330 341-331
.032 (.81) 341-340 341-341
.036 (.91) 341-350 341-351
.009 (.23) .022 (.56) 341-420 341-421
.030 (.76) 341-430 341-431
.032 (.81) 341-440 341-441
.036 (.91) 341-450 341-451
.010 (.25) .030 (.76) 341-530 341-531
.032 (.81) 341-540 341-541
.036 (.91) 341-550 341-551
.040 (1.02) 341-560 341-561
Retraction Springs
• .188 in. (4.8 mm) closewound spring
• Intermaxillary retraction
• Built-in ligature tie on one
end, preformed coil loop at
other end 90° to helix
Force Rating
Technique (at 3 mm elongation)
Light wire 4 oz. (113.4 g) 342-100
Edgewise 8 oz. (226.8 g) 342-101
10/pk
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588
T Springs
Rotation Springs
T Springs (Pletcher Springs)
• .188 in. (4.8 mm) close-wound retraction spring
• Two configurations
• Coil loop at distal end 90° to helix
Intraoral Products
8.19
Standard T Spring
Free end is straight length
extending from last helix
Ligature Ligature
10/pk
Wire Size Arbor Size Standard Looped
Inches (mm) Inches (mm) T Spring T Spring
.009 (.23) .030 (.76) - 343-430
.011 (.28) .030 (.76) 342-630 343-630
.012 (.30) .030 (.76) - 343-730
.036 (.91) 342-750 343-750
Looped T Spring
Incorporate a mesial loop for
attachment of ligature wire
Rotation Springs
Steiner Rotation Spring Wedge
• Comes with .010 in. (.25 mm)
ligature wire already in place
• Wings made of Alloy 718, an
age-hardened nickel-based
aerospace alloy for more
spring back
• Centered notch on rolled-edge
of one spring wing stabilizes
wedge under archwire
090-101 Short wing, 10/pk
090-102 Long wing, 10/pk
3M.com/ortho 3M Oral Care Orthodontic Product Catalog 2020
8.20
Intraoral Products
Unitek™ MIA Mobile Interarch System
Unitek MIA Quad Helix
MIA (Mobile Intraoral Arch) is a palatal and lingual appliance. Combining the efficiency of the Quad Helix
appliance with the advantage of easy removal and reinsertion, allows greater flexibility and control during
treatment. Available in various preformed sizes with straight or curved retention sheaths.
MIA Curved Lingual Sheath
080-810 10/pk
MIA Straight Lingual Sheath
080-211 10/pk
Arch Retention Size Part Number Quantity
Maxillary Curved 1 340-001 5/pk
Maxillary Curved 2 340-002 5/pk
Maxillary Curved 3 340-003 5/pk
Maxillary Straight 1 340-006 5/pk
Maxillary Straight 2 340-007 5/pk
Maxillary Straight 3 340-008 5/pk
Maxillary Straight 4 340-009 5/pk
Mandibular Curved 1 340-011 5/pk
Mandibular Curved 2 340-012 5/pk
Mandibular Curved 3 340-013 5/pk
Straight
Curved
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588
Preformed Lingual Arches
Preformed Lingual Arches
Horizontal Lingual Arches
• Permachrome wire (medium-hard)
• Adjustable (15° bilateral loops)
• Double-back bends on distal loops
Adjustable
Arch Length Fraction .030 in. .036 in.
(mm) (in.) Dimensions (.76 mm) (.91 mm)
57 2.25 2 ¼ 314-118 314-218
3
60 2.36
8
2
64 2.50 2 ½ 314-120 314-220
5
67 2.63 2
8
70 2.75 2 ¾ 314-122 314-222
7
73 2.87 2
8
76 3.00 3 314-124 314-224
1
79 3.11 3
8
83 3.25 3 ¼ 314-126 314-226
3
86 3.38 3
8
89 3.50 3 ½ 314-128 314-228
314-119 314-219
314-121 314-221
314-123 314-223
314-125 314-225
314-127 314-227
Intraoral Products
8.21
Minimum order: 10 per style – sizes may be assorted.
Vertical Lingual Arches
.036 in. (.91 mm) diameter medium-hard Permachrome
wire. Arches feature two-point contact with sheath by
means of two distal posts – one double, one single.
Size With
(mm) (in.) Loops
52 2.05 305-152
54 2.12 305-154
56 2.20 305-156
58 2.28 305-158
60 2.36 305-160
62 2.44 305-162
64 2.50 305-164
66 2.60 305-166
68 2.68 305-168
70 2.75 305-170
Minimum order: 10 per style –
sizes may be assorted.
Level Anchorage Palatal Bar
• Additional molar support during
facebow wear
• Increases anchorage
Size (mm) Order No.
2 37 308-002
3 42 308-003
4 46 308-004
3M.com/ortho 3M Oral Care Orthodontic Product Catalog 2020
8.22
Intraoral Products
Expansion Screws
Expansion Screws
• Indications:
- Cleft palate
- Maxillary arch discrepancies
• Most have double guide pins for linear movement
• Single guide pin narrow body configuration available for partial quadrant and expansions
• Includes adjustment key with each assembly
Guide Elongation Overall Dimensions (mm)
Pins (mm) Length Width Thickness Order No.
Springless –
standard
2 6 14 7. 5 3.4 440-146
Springless –
standard
Springless –
extra small
2 7 14 10 3.2 440-301
2 4 10 7. 5 3.2 440-303
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588
Loading...