ZyXEL Communications P-661HW-D User Manual

P-661HW-D Series

802.11g Wireless ADSL2+ 4-port Security Gateway

Quick Start Guide

Version 3.40

Edition 1

3/2006

P-661HW-D Series Quick Start Guide

Overview

Use the included CD or follow the directions in this Quick Start Guide to set up your P-661HW-D.

How to use the included CD

This CD provides multi-media animations that help you set up your P-661HW-D.

1 On the included CD, click Multimedia Auto Provisioner > Installation Tutorial.

2 At the end of the tutorial, click Configuration Genie.

1 Hardware Connections

1 Use a telephone wire to connect your P-661HW-D’s DSL port to a telephone jack or the DSL (or modem)

jack on a splitter.

2 Use an Ethernet cable to connect a computer to an ETHERNET port for Internet access.

3 Use the power adaptor provided with your P-661HW-D to connect an appropriate power source to the

POWER socket. Make sure the power source is on.

4 Push in the POWER button. Look at the lights on the front panel.

•The POWER light blinks green while your P-661HW-D starts up, and stays on once it is ready.

•The DSL light stays on if a physical connection with the ISP is established. The INTERNET light stays on when Internet access is available and blinks when the P-661HW-D is sending or receiving data.

• Each ETHERNET light stays on if the corresponding ETHERNET port is properly connected, and blinks when there is traffic.

•The WLAN light stays on if the wireless network is ready, and blinks when there is traffic.

+ 4 hidden pages