ZyXEL Communications B-400 User Manual
ZyAIR B-400
11Mbps Wireless LAN
Ethernet Adapter
Quick Installation Guide
ZyAIR B-400 Quick Installation Guide
—
—
FCC Warning
The ZyAIR B-400 has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.
FCC Radiation Exposure Statement
The ZyAIR B-400 complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator &
your body. This equipment must not be co-located or operating in
conjunction with any other antenna or transmitter.
CE Marking Warning
This is a Class B product. In a domestic environment this product may
cause radio interference in which case the user may be required to
take adequate measures.
2
ZyAIR B-400 Quick Installation Guide
—
—
Table of Contents
ZYAIR B-400 FEATURES .................................... 4
PACKAGE CONTENTS ........................................ 5
PHYSICAL DETAILS ...........................................6
HARDWARE INSTALLATION ............................8
WIRELESS NAVIGATOR INSTALLATION ....... 9
STARTUP AND LOGIN ...................................... 13
FAQ AND TROUBLESHOOTING..................... 16
3
ZyAIR B-400 Quick Installation Guide
—
—
ZyAIR B-400 Features
LAN Features
DHCP Support – Enable the adapter to act as a DHCP client to
receive an IP address from a DHCP Server in the wired
Ethernet LAN
Built-in 10BaseT LAN Port – Designed to connect the adapter
with any Ethernet-ready device, such as a desktop PC, print
server and network printer/scanner.
Wireless Features
Standard Compliant – The adapter complies with the
IEEE802.11b standard, and it is interoperable with
IEEE802.11b-Compliant Equipment
High speed Wireless Connection – Supports up to 11Mbps
wireless data rate
Data Rate Auto Fall-Back - Provides 11, 5.5, 2 and 1Mbps
wireless data rates. Shifts dynamically to guarantee the
availability and reliability of wireless connections.
Roaming – Provides seamless roaming within the IEEE802.11b
wireless LAN infrastructure
Configuration & Management
Easy to Setup - With the Windows-based Wireless Navigator
Utility, users can easily setup the IP address of the adapter, and
upgrade the firmware.
Easy to Manage – The adapter can be easily configured using
any WEB browser from anywhere on the wired or wireless LAN.
Security
Configuring Protection – Provides password protection to
prevent unauthorized users from changing the configuration.
Wireless LAN Security - Provides 64-bit & 128-bit Wired
Equivalent Privacy (WEP) encryption to protect the wireless
data transmissions.
4
ZyAIR B-400 Quick Installation Guide
—
—
Package Contents
One ZyAIR B-400 11Mbps Wireless LAN Ethernet adapter
One installation CD-ROM (Wireless Navigator Utility & User’s
Manual Included)
One power adapter
One quick installation guide
If any of the above items are damaged or missing, please contact your
dealer immediately.
5
ZyAIR B-400 Quick Installation Guide
—
—
Physical Details
Rear Panel
INIT Button
LAN Cable
Selection Switch
LAN Connection
Power Input
INIT Button “INIT” means “Initialize”. Pressing the button will
LAN Cable
Selection Switch
X: Crossover: the RJ-45 port Tx and Rx lines are reversed. Use
this setting when using a straight cable connected to a PC or
other Ethernet device. It is also the factory default setting.
II: Straight: Straight: the RJ-45 port Tx and Rx lines are normal.
Use this setting when using a straight cable connected to an
Ethernet device, such as an Ethernet hub/switch.
reboot the device and restore the settings to the
factory default settings.
6
Loading...