ZyXEL SHD1111 Quick Start Manual

Quick Start Guide

SHD1111

C

Door/Window Detector

Version 1.00
Edition 1, 7/2011

www.zyxel.com

2011 ZyXEL Communications Corporation

2

1

2

ENGLISH

Overview

The SHD1111 is a Z-WaveTM enabled door/window detector which is fully
compatible with any Z-Wave enabled network. It monitors the closing
and opening of doors and windows. If the door/window is opened or
closed, the SHD1111 will send alerts to associated devices for further
actions, such as trigger lighting to power on/off automatically or activate
the burglar alarm.

Inserting the Batteries

Follow the steps below to inserting
batteries into the SHD1111.

1. Remove the screw from the bottom of
the SH D1111.

2. Detach the back cover.

3. Insert 3 AAA-size 1.5V batteries into

the battery compartment.

Note: Alkaline batteries are highly

recommended.

Note: To replace the batteries, remove the

old ones and wait for 5 seconds before
inserting the new batteries.

Adding to Z-Wave Network

The SHD1111 can be associated in a group with up to 5 nodes. All
devices associated with SHD1111 will be operated when the SHD1111
sends an alert after the door/window has been opened/closed.

3