ZyXEL P-794H Brochure & Specs

P-794H
G.SHDSL.bis 4-port Bonding Gateway
P-794H
G.SHDSL.bis 4-port Bonding Gateway
Benefits
Symmetrical high-speed Internet access
The ZyXEL P-794H is a high-performance G.SHDSL.bis gateway for small/medium offices to have
Internet access and LAN-to-LAN applications over the existing copper line. The P-794H makes full
11.38 Mbps, 17.07 Mbps, or 22.76 Mbps over standard 2-wire, 4-wire, 6-wire, or 8-wire telephone
lines, respectively.
Auto detection to support EFM or ATM with single device
The P-794H is a G.SHDSL.bis gateway with high flexibility that supports ether ATM mode or EFM
mode to provide high-speed LAN-to-LAN connection and Internet access for small businesses or
branch offices through G.SHDSL.bis connection over the copper line.
Point-to-point connectivity
Users can set up a point-to-point connection between two P-794H devices. The feature offers
a cost-effective, high-speed connection for high-bandwidth applications.
EFM/ATM 8-wire Auto-detect G.SHDSL.bis Gateway
Ł

Symmetrical high-speed Internet access
Ł

Auto detection to support EFM or ATM with single device
Ł

Point-to point connectivity
5-100-01311012 05/11
For more product information, visit us on the web at www.ZyXEL.com
Copyright © 2011 ZyXEL Communications Corp. All rights reserved. ZyXEL, ZyXEL logo are registered trademarks of ZyXEL Communications Corp. All other brands, product names, or trademarks mentioned are the property of their respective owners. All specifications are subject to change without notice.
G.SHDSL.bis IP DSLAM
Internet
P-794H
G.SHDSL.bis 4-port Bonding Gateway
P-794H
G.SHDSL.bis 4-port Bonding Gateway
P-794H
G.SHDSL.bis 4-port Bonding Gateway
Connection to G.SHDSL.bis IP DSLAM
Extra-LAN
DSL (1~4) CID Reset
DC 12V
LAN (1~4)
P-794H
G.SHDSL.bis 4-port Bonding Gateway
P-794H
G.SHDSL.bis 4-port Bonding Gateway
System Specifications
Router/Bridge
• NAT/PAT support
• PPPoE (RFC2516)
• IGMP v1/v2
• IGMP Proxy/fast leave/snooping
• Configurable as either server or client mode
• Support IPOA/IPOE
• DMZ support
• Support Port-based VLAN
• VPN pass-through IPSec and L2TP
• QoS support VBR-rt, VBR-nrt, CBR and UBR
G.SHDSL Compliance
• Support ITU-T G991.2/G.994.1 standards
• Support ITU-T G.998.1 (G.bond)(ISOS 10)
• Extended Rate Bonded SHDSL- (G.991.2 Annex
F, G)
• TC-PAM line modulation
• EFM/ATM configurable
• OAM IEEE 802.3 chapter 57 compliant
• IEEE 802.3 2BASE-TL (aka 802.3ah) compliant
• Rate negotiating/Manually rate adaptation
configuration
• 2-wire/4-wire/6-wire and 8-wire mode auto
detect in either ATM mode and EFM mode
• Transmission rate up to 5.69 Mbps
(2-wire mode)
• Transmission rate up to 11.38 Mbps
(4-wire mode)
• Transmission rate up to 17.07 Mbps
(6-wire mode)
• Transmission rate up to 22.76 Mbps
(8-wire mode)
• Support Bonding based on EFM and ATM*
ATM Support
• Multiple protocols over AAL5 (RFC1483)
• PPP over ATM (RFC 2364)
• ATM AAL5 supported
• Support 8 PVCs
• ATM Forum UNI3.0/4.0 PVC
• OAM F4/F5 Loopback, RDI, AIS
• UBR CBR, and nrt-VBR traffic shaping
EFM Support
• EFM mode compliant to IEEE 802.3, G.998.2
• PPP over Ethernet (RFC2516)
• Support of OAMPDU information and
functionality (ITU-T Y.1731)
• OAMPDU Loopback Control
• VLAN base QOS (802.1P/Q)
Internet Access Sharing
• 512 NAT sessions
• NAT server (Port forwarding)
• Dynamic DNS (www.dyndns.org)
• DHCP server/client/relay
Security
• User Authentication (PAP, CHAP) with PPP (RFC
1334, RFC 1994)
• Microsoft CHAP (ISOS 10)
• Stateful packet inspection firewall (SPI)
• Packet filter
• Prevent Denial of service (Dos)
• Access control of service
• Real-time attack alert and log
Network Management
• TR-069 Remote management
• Web-based Configuration
• Command-line interface (CLI)
• Password-protected Telnet support
• SNMP V1/V2c with MIB II
• TFTP & FTP firmware upgrade and configuration
backup
• TR-069 HT TPS
• Secure Shell function (SSH)
* Firmware upgradeable for future enhancement
Hardware Specifications
• Two RJ-11 interface for 8 wire G.SHDSL.bis WAN
port
• Four auto-sensing 10M/100M Ethernet LAN
ports (RJ-45)
• One Reset switch button
• One Power DC jack
• Status LEDs indicator: POWER, CO MODE, LAN,
DSL, ALARM
• One CID port
Physical Specifications
• Item dimensions (WxDxH):
210 x 200 x 43 mm (8.27” x 7.87” x 1.69”)
• Item weight: 849 g (1.88 lb)
• Packing dimensions (WxDxH):
321 x 240 x 73 mm (12.63” x 9.45” x 2.87”)
• Packing weight: 1,459 g (3.22 lb)
Environmental Specifications
Operating Environment
• Temperature: 0°C to 40°C (32°F to 104°F)
• Humidity: 20% to 90% RH (non-condensing)
Storage Environment
• Temperature: -20°C to 60°C (-4°F to 140°F)
• Humidity: 20% to 95% RH (non-condensing)
Certification
• CE
• FCC Part 15 (Class B)
Rear Panel
Specifications
Application Diagram
Loading...