Zyxel P-791R User Manual
Prestige 791R
G.SHDSL Router
Quick Start Guide
Version 3.40
May 2003
Prestige 791R
Introducing the Prestige
The Prestige 791R Router can be used for high-speed LAN-to-LAN connections or Internet access
through a G.SHDSL connection over the telephone line. You can use your Prestige for either IP
routing or bridging depending on your ISP (Internet Service Provider) configuration.
You should have an Internet account already set up and have been given most of the following
information.
INTERNET ACCOUNT INFORMATION
Your device’s WAN IP Address (if given): __________________
DNS Server IP Address (if given): Primary __________________, Secondary _________________
Virtual Path Identifier (VPI): ____________
Virtual Channel Identifier (VCI): ____________
Multiplexing (VC-based or LLC-based):
Encapsulation:
Transfer Rate:
Standard Mode:
RFC 1483
ENET ENCAP
PPPoA
PPPoE
Ethernet Encapsulation Gateway IP Address: ____________________
User Name: ____________ Password: ____________
Service Name: ____________
User Name: ____________ Password: ____________
VC LLC
2
Prestige 791R
Quick Start Overview
Hardware Installation............................................................................................................. 3
Setting Up Your Computer’s IP Address.............................................................................. 5
Configuring Your Prestige .....................................................................................................6
Hardware Installation
Rear Panel
LABEL DESCRIPTION
POWER Connect to a power source using the power adapter for your region (see your User’s
Guide).
RESET You only need to use this button if you’ve forgotten the Prestige’s password. It returns the
Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1, terminal
emulation settings as described above etc.; see your User’s Guide for details).
LAN 10M/100M Connect to a computer/external hub using an Ethernet cable. The LAN port is auto-sensing
which means either a crossover or straight-through Ethernet cable will do in either case.
3
Loading...