Zyxel P-662HW-D specifications

P-662HW-D Series

ADSL2+ 4-Port Wireless Security Gateway

Quick Start Guide

Version 3.40

Edition 1

3/2006

P-662HW-D Series Quick Start Guide

Overview

Use the included CD or follow the directions in this Quick Start Guide to set up your P-662HW-D.

How to Use the Included CD

This CD provides multi-media animations that help you set up your P-662HW-D.

1 On the included CD, click Multimedia Auto Provisioner > Installation Tutorial.

2 At the end of the tutorial, click Configuration Genie.

1DSL: Use a telephone wire (and telephone adaptors, if provided with your P-662HW-D) to connect your P-

662HW-D to a telephone jack.

2ETHERNET: Use an Ethernet cable to connect a computer to the ETHERNET port for initial configuration

and/or Internet access.

3POWER: Use the power adaptor provided with your P-662HW-D to connect an appropriate power source

to the POWER socket.

4 Push in the POWER button. Look at the lights on the front panel.

•The POWER light blinks green while your P-662HW-D starts up and stays green once it is ready.

•The DSL light is on if a DSL connection is established.

• Each ETHERNET light stays on if the corresponding Ethernet port is properly connected and blinks when there is traffic.

•The WLAN light is on if the wireless network is on.

P-662HW-D Series Quick Start Guide

If the lights are not on, check your connections, and inspect your cables for damage. If you still have problems, contact your local vendor.

1 In your browser, go to http://192.168.1.1.

2 Enter the default password user to go

directly to the Status screen.

If your browser cannot find this screen, check its security settings. See Troubleshooting for details.

+ 4 hidden pages