ZyXEL P660HWT1V2 User Manual
P-660H-T Series
ADSL2+ 4-port Security Gateway
P-660HW-T Series
802.11g Wireless ADSL2+ 4-port Security Gateway
Quick Start Guide
Version 3.40
7/2005
P-660HW-T and P-660H-T Series Quick Start Guide
Overview
The P-660HW-T is an ADSL Internet gateway with IEEE 802.11g wireless capability and a 4-port built-in
switch. The P-660H-T is an ADSL Internet gateway with a 4-port built-in switch. You may need your Internet
access information. Both model series are referred to as the “Prestige” in this guide.
See your User’s Guide for background information on all features. This guide is divided into the following
sections.
1 Hardware Connections
2 Configuration for Internet Access
3 Wireless Configuration (P-660HW-T only)
4 NAT
5 Firewall
6 Troubleshooting
1 Hardware Connections
You need the following before you start.
Prestige
The rear panels of both Prestiges are the same, except the P-660HW-T has an additional wireless antenna.
Computer(s) Ethernet Cable Telephone Cable Power Adaptor
2
P-660H-T Series
P-660HW-T Series
P-660HW-T and P-660H-T Series Quick Start Guide
1DSL: Connect the Prestige to a telephone jack using a telephone wire.
2LAN: Use an Ethernet cable to connect a computer to a LAN 10/100M port for initial configuration and/or
Internet access.
3POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source
(see the User’s Guide for power adaptors specifications by region).
3
P-660HW-T and P-660H-T Series Quick Start Guide
After you’ve made the connections, push in the power button to turn on the Prestige. Look at the front panel
LEDs. The PWR/SYS LED blinks while performing system testing. The PWR/SYS and/or WLAN LEDs then
turn steady on if the testing is successful. The LAN LED turns on if the LAN port is properly connected.
2 Configuration for Internet Access
You may configure the Prestige for Internet access in any one of these ways:
• Configuration Genie
• Zero Configuration
• Web Configurator Internet Access Wizard
2.1 Configuration Genie
• From the included CD, click “Multimedia Auto Provisioner” (the installation and configuration assistant) and
then click “Installation Tutorial”. After you’ve viewed the tutorial, click “Configuration Genie” at the end of the
installation tutorial or from “Multimedia Auto Provisioner” in the CD.
2.2 Zero Configuration
Launch your web browser and
navigate to any web site (for
example, www.zyxel.com). The
Prestige automatically detects
and configures your Internet
connection. This may take about
two minutes.
If you have a PPPoE or PPPoA
connection, a screen displays
prompting you to enter your
Internet account information. Enter the username, password and/or service name exactly as provided. Click
Apply.
2.3 Accessing the Web Configurator
1 Launch your web browser. Enter “192.168.1.1” as the
web site address.
4
Loading...