ZyXEL P-2602HWUDL-D Quick Start Manual
P-2602HWUDL-D
802.11g Wireless ADSL VoIP IAD
with Built-in DECT Base Station
Quick Start Guide
Version 3.40
8/2007
Edition 1
DEFAULT LOGIN
IP Address http://192.168.1.1
Password 1234
Copyright © 2007. All rights reserved.
P-2602HWUDL-D Quick Start Guide
Overview
The P-2602HWUDL-D model is a router which combines high-speed ADSL Internet
access, a built-in switch, a firewall and high-speed wireless networking capability. It also
has a built-in DECT GAP base station for compatibility with DECT cordless phones, USB
2.0 ports for sharing files via USB compatible storage devices and one phone port for
making calls over the Internet (Voice over IP or VoIP). The P-2602HWUDL-D can use
regular phone services through regular (PSTN) phone lines and can also function as a
print server.
1 Requirements
Make sure you have the following things before you set up your P-2602HWUDL-D.
• Internet access - account information provided by your ISP, such as user name, password,
and so on.
• VoIP account - You need the account information provided by your VoIP service provider
(the company that lets you make phone calls over the Internet).
• Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with JavaScript enabled.
" See the User’s Guide for all configuration details including file sharing and
setting up a shared printer.
1
P-2602HWUDL-D Quick Start Guide
To read the User’s Guide insert the CD that came in the box into your CD-ROM drive. A
screen should pop up. Navigate to the User’s Guide from this screen. If a screen does not
pop up, open Windows Explorer (click My Computer), click on the CD-ROM drive (usually
drive D:) and navigate to it from there.
2 Hardware Connections
1DSL: Use a telephone wire to connect this port to the DSL or MODEM jack on a splitter.
2LINE: Use the green PSTN cable to connect the TEL or PHONE jack on the splitter to this
port. Connect the splitter to a telephone jack.
2
P-2602HWUDL-D Quick Start Guide
" When the ZyXEL Device does not have power, the phone(s) connected to
the PHONE port can still be used for making PSTN calls.
3 PHONE: Use a telephone cable (and any telephone adaptor provided with your P-
2602HWUDL-D) to connect your telephone to this port.
4 USB 2.0: Connect a USB (version 2.0 or lower) memory stick for file sharing. The P-
2602HWUDL-D automatically detects the USB device.
5USB 2.0: Use a USB cable (not provided) to connect a USB (version 2.0 or lower)
printer to this port.
6 ETHERNET 1-4: Use an Ethernet cable to connect a computer to this port for initial
configuration and/or Internet access.
7 Use the power adaptor provided with your P-2602HWUDL-D to connect an appropriate
power source to this socket.
8 Push the power switch to the on position.
Look at the LEDs (lights) on the top panel of the P-2602HWUDL-D.
•The POWER light blinks during start-up and is green once the P-2602HWUDL-D is ready.
• Each ETHERNET light turns on if the corresponding ETHERNET port is properly connected. The lights blink when the P-2602HWUDL-D is sending or receiving data through
the corresponding ETHERNET port.
•The DSL light stays on if a physical connection with your DSL modem exists and blinks
when transmitting data. The INTERNET light stays on when Internet access is available.
•The PHONE lights stay on when your SIP account is registered and they blink if the
receiver is off the hook.
•The WLAN light turns on when the wireless LAN is ready. It blinks when the P-
2602HWUDL-D is sending/receiving data through the wireless LAN.
•The USB light turns on when there is a USB device (printer or memory stick) connected to
the P-2602HWUDL-D.
3
P-2602HWUDL-D Quick Start Guide
If the PHONE light is on, skip to Section 6 to see how to make calls through the Internet.
If the INTERNET light comes on but the PHONE light is off, go to Section 4.3 and use the
VOICE OVER INTERNET SETUP wizard.
If the INTERNET light is off but the DSL light is on, go to Section 4 and use the INTERNET/
WIRELESS SETUP to configure your Internet access settings.
V Check your connections if an LED does not turn on. Then turn the P-
2602HWUDL-D off, wait for a few seconds and turn it back on. See
Troubleshooting. If the problem remains, contact your local vendor.
3 DECT Phone Registration
In order to use your DECT phone with the P-2602HWUDL-D, the DECT phone must
register with the P-2602HWUDL-D’s DECT base station. Take the following steps to
register your DECT phone with the P-2602HWUDL-D.
1 Press down the DECT base station button ( ) on the left side (when facing the LEDs
(lights)) of your P-2602HWUDL-D for 6 to 11 seconds. When the DECT light begins to
blink, the P-2602HWUDL-D is in registration mode. The P-2602HWUDL-D in
registration mode for 25 to 30 seconds. Your DECT phone must be registered within the
time period.
" If you press the DECT base station button for 12 seconds or more, the
DECT base station resets and all previously registered DECT phones must
be re-registered.
4
Loading...