ZoneDAS One
5G NR Active DAS
Perfect Solution for
Multi-Operator Deployment
Seamless indoor cellular in 5G-NR era
The 5G-NR cellular wireless brings blazing-fast speed and high-capacity
for access, the fastest 5G has more challenges for bringing cellular signal
indoors by its technology essence - higher frequency, shorter coverage.
ZoneDAS One system plays a crucial role in 5G era for businesses and
consumers to solve the challenges in bringing 5G Indoors via easy-to-deploy
copper or fiber cabling. Via copper connection, it also allows ZoneDAS One
power its entire system with PoE and just one power supply, significantly
shortening system deployment time. ZoneDAS One system provides
ubiquitous coverage ideal for hospitality, commercial venues, workplaces,
and residential buildings.
Signal source and tech independent
Being analog based, the ZoneDAS One system is technology independent,
supporting everything from 2G to 5G. It is a multi-operator, neutral host DAS
solution delivering cellular signals into the locations difficult to cover with
traditional macro networks. It supports “frequency re-farming” and allows
multiple technologies (2G/3G/4G/5G/NB-IoT) to run concurrently in the same
range of frequencies. Unlike traditional DAS products, ZoneDAS One works
with low-power base stations and accepts weak small cell signals of 5 ~ 24 dBm
from multi-vendors. This negates the need to purchase high-power base
stations and helps system integrators lower their deployment CAPEX.
Neutral Host DAS Solution
Analog-Based Hybrid
Signal Source
Flexible deployment via
copper or fiber cabling
Innovative design, end-to-end
performance guarantee
Fully modular architecture
Datasheet ZoneDAS One
Flexible and adaptable
Featuring a fully modular design architecture, the ZoneDAS
One presents highly flexible designs and enables adaptable
active antenna system. It easily adds support for MIMO,
additional carriers, or future technologies through simple
module additions or swaps. Whether you need to add a
new band, or a change occurs in mobile technology, such
as the evolution from 4G to 5G, the ZoneDAS One adapts to
meet your requirements and protect your investment. The
ZoneDAS One also supports flexible 2 tier or 3 tier approach
with Expanders and Fiber converters for simpler and more
efficient installation.
Simple maintenance & management
Traditional DAS products do not offer end-to-end
monitoring and management. Signals just quietly travel
through RF cables, and building owners have no proactive
monitoring to detect issues occurred until complaints
arise. Zyxel’s active ZoneDAS One solves the problem
with its support for end-to-end system monitoring and
management, enabling IT staff to manage everything from
the RF source to the antenna point via VLAN, OpenVPN,
SNMPv2/v3, Web GUI, and remote Syslogs.
Specifications
Base Unit
BU (Base Unit) Chassis
• 1U height, 19” rack mountable
• 2 x Signal Distribution (SD) module slots
• 4 x RF POI module slots
• Bandwidth up to 400 MHz DL/
280 MHz UL
• 1 x RJ-45 management port for
backend NMS integration
• 1 x RJ-45 console port
• 1 x Reset button
• Management: Web GUI, SNMPv2/v3
agent, and Syslog through Open VPN
• AC power: 100 ~ 240 V AC, 50 - 60 Hz
• Dimensions (WxDxH):
440 x 325 x 45 mm
• Net weight: 5.5 kg full load
• Power consumption: 510 W full load
• Optional expansion kit: Expanders/
Fiber Converts/Line Extenders
BU-POI Module
• Smart POI with SMA interface
• Band selectable as the ZoneDAS One
System RF Specifications table
• Relay bandwidth up to 100 MHz max.
per module
• RF source input power range:
0 ~ 24 dBm (2G/3G/4G), 5 ~ 24 dBm (5G)
• ALC protection range:
24 dBm ~ 30 dBm
2Datasheet ZoneDAS One
RJ-45 SD (Signal Distribution) Module
• 4 x RJ-45 ports
• Each RJ-45 port supports up to 100
meters of CAT7 S/STP cabling (n78,
3.3 ~ 3.8 GHz), or CAT6a S/STP
(Below 2700 MHz)
• PoE feeds power to Remote Units via
RJ-45 cables
Fiber SD (Signal Distribution) Module
• 4 LC/APC optical ports
• Each fiber optical port supports Dual
Core Single Mode Optical Fiber, up to
2.5 km
Remote Unit
RU (Remote Unit) Box
• Band selectable as the ZoneDAS One
System RF Specifications table
• Support up to 4 RF modules
• 1 x RJ-45 interface for BU connection
via CAT7 or CAT6a S/STP cabling
• Power supply via PoE
• Built-in Omni antennae with 3 dBi gain
• Output power range: 14 ~ 23 dBm
• Fanless design
• Ceiling mount
• Dimensions (WxDxH):
270 x 270 x 80 mm
• Net weight: 2.5 kg
• Power consumption: 60 W full load
Remote Unit for External Antennas
• Band selectable as the ZoneDAS One
System RF Specifications table
• Bandwidth up to 400 MHz DL/
280 MHz UL
• Support up to 4 RF modules
• 1 x RJ-45 interface for BU connection
via CAT7 or CAT6a S/STP cabling
• Power supply via PoE
• 4 x SMA-type connectors for external
antenna
• Max output power per antenna port:
17 dBm
• Fanless design
• Ceiling mount
• Dimensions (WxDxH):
270 x 270 x 80 mm
• Net weight: 2.5 kg
• Power consumption: 60 Watts full load
Expander CC
• 1U height, 19” rack mountable
• 1 x RJ-45 uplink port to Base Unit via
CAT7/6a Ethernet cable, up to 100 m
• 8 x RJ-45 as SD ports to Remote
Units via CAT7/6a Ethernet cable, up
to 100 m
• 1 x RJ-45 console port
• PoE power feeding to Remote Units
• Input power: AC input, 100 ~ 240 VAC,
50 - 60 Hz
• Dimensions (WxDxH):
440 x 308 x 45 mm
• Net weight: 4.5 kg
• Power consumption: 502 W
Expander FC
• 1U height, 19” rack mountable
• 1 x LC/APC Duplex uplink port to
Base Unit via single mode fiber
optical cable
• 8 x RJ-45 SD ports to Remote Units via
CAT7/6a Ethernet cable, up to 100 m
• 1 x RJ-45 Local console port
• PoE power feeding to Remote Units
• Input power: AC input, 100 ~ 240 V AC,
50 - 60 Hz
• Dimensions (WxDxH):
440 x 308 x 45 mm
• Net weight: 4.5 kg
• Power consumption: 502 W
Expander FF
• 1U height, 19” rack mountable
• 1 x LC/APC Duplex uplink port to
Base Unit via single mode fiber
optical cable
• 16 x LC/APC Duplex SD ports to Fiber
Converter via single mode fiber
optical cable
• 1 x RJ-45 console port
• Input power: 12 V DC input
• Dimensions (WxDxH):
440 x 278 x 45 mm
• Net weight: 5.5 kg
• Power consumption: 40 W
Line Extender
• 1 x RJ-45 uplink port to Base Unit/
Expander via CAT7/6a Ethernet
Cable, up to 100 m
• 1 x RJ-45 SD port to Remote Unit via
CAT7/6a Ethernet Cable, up to 100 m
• PoE power feeding to Remote Units
• Input power: 48 V DC input
• Dimensions (WxDxH):
150 x 30 x 205 mm
• Net weight: 0.7 kg
• Power consumption: 75 W
Fiber Converter
• 1 x LC/APC Duplex uplink port to
Base Unit/Expander via single mode
fiber optical cable
• 1 x RJ-45 SD port to Remote Unit via
CAT7/6a Ethernet cable, up to 100 m
• PoE power feeding to Remote Units
• Input power: 48 V DC input
• Dimensions (WxDxH):
186 x 43 x 203 mm
• Net weight: 1.7 kg
• Power consumption: 76 W
Environmental Specifications
Operating Environment
• Temperature: 0°C to 45°C
• Humidity: 10% to 95%
(Non-condensing)
Storage Environment
• Temperature: -40°C to 75°C
• Humidity: 10% to 95%
(Non-condensing)
Certification
CE
• EN301 489-1
• EN301 908-1
• EN50385 BS: 2017
• EN62368-1 2017
ZoneDAS One System RF
Specifications
Band Duplex
Mode
1/n1 FDD 1920 ~ 1980 2110 ~ 2170
3/n3 FDD 1710 ~ 1785 1805 ~ 1880
7/n7 FDD 2500 ~ 2570 2620 ~ 2690
8/n8 FDD 880 ~ 915 925 ~ 960
20/n20 FDD 832 ~ 862 791 ~ 821
28a/n28a FDD 703 ~ 733 758 ~ 788
41/n41* TDD 2496 ~ 2690
n78* TDD 3300 ~ 3800
*: Not applicable for Remote Unit for External
Antennas
Uplink
(MHz)
Downlink
(MHz)
3Datasheet ZoneDAS One
Repeater
Repeater
Repeater
2 km
200 m
CAT7
Single-mode optical fiber
LMR400 equivalent coaxial cable
Expander
FC
Expander
FC
Basement
Operator A
Smallcell
3G/4G
Remote Unit
ZoneDAS One
Base Unit
Remote Unit
Remote
Unit
Fiber Converter
5G-NR
RRU/SmallCell
2x2 MIMO
Operator B
Repeater
Operator C
Repeater
Operator D
Repeater
2 km
200 m
Expander
FC
Expander
FC
Basement
Operator A
Smallcell
3G/4G
Remote Unit
ZoneDAS One
Base Unit
Remote Unit
Remote
Unit
Fiber Converter
5G-NR
RRU/SmallCell
2x2 MIMO
Operator B
Repeater
Operator C
Repeater
Operator D
Repeater
Application Diagram
ZoneDAS One
Base Unit
Operator A
Smallcell
Single-mode
optical fiber
PoE
LMR400
equivalent
coaxial cable
In-Building Cellular
ZoneDAS One family
3G/4G
Operator B
5G-NR
RRU/SmallCell
2x2 MIMO
Operator C
Fiber Converter
Fiber < 2.5 km
Operator D
PoE from Fiber
Converter
PoE from BU
Remote Unit
Fiber Expander
(support copper PoE)
Remote UnitRemote Unit
PoE from
Expander
FC
•
Supports low-input-power base stations
•
CAT7 cabling
•
Single-mode optical fiber cabling
CAT7
Single-mode optical fiber
LMR400 equivalent coaxial cable
For more product information, visit us on the web at www.zyxel.com
Copyright © 2022 Zyxel and/or its affiliates. All rights reserved.
All specifications are subject to change without notice.
Datasheet ZoneDAS One
06/22
Loading...