No part of this publication may be excerpted, reproduced,
translated or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm,
without the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve
the right to make modifications on print errors or update
specifications without prior notice.
Version No. : R1.0
Edition Time :
Manual No. :
3
第3页
Security
To protect your mobile phone from illegal use, take the
security measures as follows:
Set PIN codes of the SIM card.
Set handset lock code.
Set call restrictions.
Safety Precautions
This section includes some important information on safe
and efficient operation. Please read this information before
using the phone.
Operational Precautions
Please use your phone properly. When making or
receiving a call, please hold your phone as holding a
wireline telephone. Make sure that the phone is at least
one inch (about two point five centimeters) from your
body when transmitting.
Do not touch the antenna when the phone is in use.
Touching the antenna area affects call quality and may
cause the phone to operate at a higher power level than
needed.
Some people may be susceptible to epileptic seizures
4
第4页
or blackouts when exposed to flashing lights, such as
when watching television or playing video games. If you
have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult your
doctor before playing video games on your phone or
enabling a flashing-light feature on your phone. (The
flashing-light feature is not available on all products.)
Keep the phone out of the reach of small children. The
phone may cause injury if used as a toy.
Precautions While Driving
Please pay attention to the traffic safety. Check the laws
and regulations on the use of your phone in the area
where you drive. Always obey them.
Use hands-free function of the phone, if available.
Pull off the road and park before making or answering a call
if conditions require.
Precautions for Medical Devices and Facilities
When using your phone near pacemakers, please always
keep the phone more than eight inches (about twenty
centimeters) from the pacemaker when the phone is
switched on. Do not carry the phone in the breast
pocket. Use the ear opposite the pacemaker to minimize
the potential for interference. Switch off the phone
5
第5页
immediately if necessary.
Some phones may interfere with some hearing aids.
In the event of such interference, you may consult
your hearing aids manufacturer to discuss alternatives.
If you use any other personal medical device, please
consult the manufacturer of your device to determine if it
is adequately shielded from RF energy.
In those facilities with special demand, such as hospital or
health care facilities, please pay attention to the
restriction on the use of mobile phone. Switch off your
phone if required.
Mobile Phone
Please use original accessories or accessories
approved by the phone manufacturer. Using any
unauthorized accessories may affect your mobile
phone‟s performance, damage your phone or even cause
danger to your body and violate related local regulations
about telecom terminals.
Turn off your phone before you clean it. Use a damp or
anti-static cloth to clean the phone. Do not use a dry cloth
or electrostatically charged cloth. Do not use chemical or
abrasive cleaners as these could damage the phone.
As your mobile phone can produce electromagnetic field,
6
第6页
do not place it near magnetic items such as computer
disks.
Using the phone near electrical appliances such as TV,
telephone, radio and personal computer can cause
interference.
Do not expose your mobile phone to direct sunlight or
store it in hot areas. High temperatures can shorten the
life of electronic devices.
Keep your phone dry. Any liquid may damage your
phone.
Do not drop, knock or harshly treat the phone. Rough
handling can break internal circuit boards.
Do not connect the phone with any incompatible
enhancement.
Do not attempt to disassemble the mobile phone or
battery.
Do not store the phone with flammable or explosive
articles.
Do not charge the mobile phone without battery.
Precautions for Potentially Explosive Atmospheres
Switch off your phone prior to entering any area with
potentially explosive atmospheres, such as fueling areas,
7
第7页
fuel or chemical transfer or storage facilities.
Do not remove, install, or charge batteries in such areas.
Spark in a potentially explosive atmosphere can cause
an explosion or fire resulting in bodily injury or even
death.
To avoid possible interference with blasting operations,
switch off your phone when you are near electrical blasting
caps, in a blasting area, or in areas posted “Turn off
electronic devices.” Obey all signs and instructions.
Precautions for Electronic Devices
Some electronic devices are susceptible to
electromagnetic interference sent by mobile phone if
inadequately shielded, such as electronic system of
vehicles. Please consult the manufacturer of the device
before using the phone if necessary.
Safety and General Use in Vehicles
Safety airbag, brake, speed control system and oil eject
system shouldn‟t be affected by wireless transmission.
If you do meet problems above, please contact your
automobile provider. Do not place your phone in the
area over an airbag or in the airbag deployment area.
Airbags inflate with great force. If a phone is placed in
the airbag deployment area and the airbag inflates, the
8
第8页
phone may be propelled with great force and cause
serious injury to occupants of the vehicle.
Please turn off your mobile phone at a refueling point,
and the same to the place where the use of two-way
radio is prohibited.
Aircraft Safety
Please turn off your mobile phone before the airplane
takes off. In order to protect airplane‟s communication
system from interference, it is forbidden to use mobile
phone in flight. Safety regulations require you to have
permission from a crew member to use your phone while
the plane is on the ground.
If the mobile phone has the function of automatic timing
power-on, please check your alarm setting to make sure
that your phone will not be automatically turned on during
flight.
Battery Use
Do not short-circuit the battery, as this can cause the unit
to overheat or ignite.
Do not store battery in hot areas or throw it into fire.
Otherwise, it will cause explosion.
Do not disassemble or refit the battery. Otherwise, it will
9
第9页
cause liquid leakage, overheating, explosion and ignition
of the battery.
Please store the battery in a cool dry place if you don‟t
use it for a long period.
The battery can be recharged for hundreds of times, but it
will eventually wear out. When the operating time (talk
time and standby time) is noticeably shorter than normal,
it is time to replace it with a new one.
Please stop using the charger and battery when they
are damaged or show evidence of aging.
Return the worn-out battery to the provider or dispose of
it in accordance with environment regulations. Do not
dispose of it in household rubbish.
Please use original batteries or batteries approved by the
phone manufacturer. Using any unauthorized battery
may affect your handset performance or may cause
danger of explosion, etc.
Warning: If the battery is damaged, do not discharge it. If the
leakage does come into contact with the eyes or skin, wash
thoroughly in clean water and consult a doctor.
10
第10页
FCC Compliance
This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device does
not cause harmful interference.
Caution: Changes or modifications not expressly
approved by the manufacturer could void the user‟s
authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
11
第11页
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV
technician for help.
Health and safety information
Radio Frequency (RF) Energy
This model phone meets the government‟s requirements
for exposure to radio waves.
This phone is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission
of the U.S. Government:
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC
is 1.6W/kg. *Tests for SAR are conducted using
standard operating positions accepted by the FCC with
the phone transmitting at its highest certified power level
in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below
12
第12页
the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use
only the poser required to reach the network. In general,
the closer you are to a wireless base station antenna, the
lower the power output.
The highest SAR value for the model phone as reported
to the FCC when tested for use at the ear is 1.070 W/kg
and when worn on the body, as described in this user
guide, is0.867 W/kg (Body-worn measurements differ
among phone models, depending upon available
enhancements and FCC requirements.)
While there may be differences between the SAR levels
of various phones and at various positions, they all meet
the government requirement.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on
FCC ID: Q78-GN281
For body worn operation, this phone has been tested and
meets the FCC RF exposure guidelines for use with an
accessory that contains no metal and the positions the
handset a minimum of 1.5 cm from the body. Use of
other enhancements may not ensure compliance with
13
第13页
FCC RF exposure guidelines. If you do no t use a
body-worn accessory and are not holding the phone at
the ear, position the handset a minimum of 1.5 cm from
your body when the phone is switched on.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect,
special, incidental or consequential damages resulting from
or arising out of or in connection with using this product,
whether or not ZTE had been advised, knew or should have
known the possibility of such damages. The user should
refer to the enclosed warranty card for full warranty and
service information.
Note: The pictures and icons shown in the manual are just
schematic drawings for function demonstration. If they are
inconsistent with your handset, please take your handset as
the standard. If the inconsistency exits in the manual
because of the handset function updating, please refer to
the follow-up public information from ZTE CORPORATION.
第14页
Your Phone
Camera key
End key
Send key
Touch screen
Status bar
Receiver
Power key
Volume keys
USB connector
14
15
第15页
Turn On / Off or wake up your
phone
Hold the Power key to turn your phone on or off.
In Menu→Settings→Phone settings→Misc.
settings→LCD backlight, set the LCD backlight time. If the
phone is not operated within this time, the screen will turn
black.
Press the any key to wake up your phone.
Lock / unlock the keypad
In Menu→Settings→Security settings→Auto keypad
lock, set the auto keypad lock time. If the phone is not
operated within this time, the keypad will be locked. Or you
can press the Power key to lock the screen in the standby
mode.
To unlock the keypad, follow the onscreen instruction to pull
the card down.
Note:In this User Manual, “press a key” means to press the
key and release it, while “hold a key” means to press the
key for at least two seconds and then release it. Locking
the keypad can prevent unintentional operations on it.
16
第16页
You can answer an incoming call with the regular operation
when the keypad is locked.
Use the Touchscreen
Your phone supports touch screen functionality.
Drag up or down to scroll.
Tap any application to open it.
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.