No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without the prior written
permission of ZTE Corporation.
The guide is published by ZTE Corporation. We reserve the right to make modifications on print errors or
update specifications without prior notice.
Version No.: 1.0
Edition Time: 07 23, 2011
Contents
Thank You For Choosing ZTE Unite ........................................................................................... 5
Getting Started ........................................................................................................................ 6
Installing the SIM Card ......................................................................................................................................... 7
Inserting and Charging the Battery ...................................................................................................................... 7
Removing the SIM Card ........................................................................................................................................ 8
Connecting to the Internet ....................................................................................................... 9
Connecting Wi-Fi Enabled Devices To Your ZTE Unite ....................................................................... 9
Accessing the Internet ...................................................................................................................... 9
Petrol stations and explosive atmospheres........................................................................................................ 27
Blasting Caps and Areas ...................................................................................................................................... 27
Vehicles Equipped with an Airbag .................................................................................................. 27
Third Party Equipment ................................................................................................................... 27
Efficient Use ................................................................................................................................... 27
Radio Frequency (RF) Exposure ...................................................................................................... 27
The ZTE Unite is a newly developed 4G LTE Mobile Hotspot, providing flexible LTE/EVDO/CDMA 1X
access for users to enjoy high-speed Internet applications. When connected to the U.S. Cellular® 4G
LTE Network, the ZTE Unite can support simultaneous connections with up to 10 Wi-Fi enabled devices.
When connected in 2G or 3G mode the ZTE Unite can support simultaneous connections with 5 Wi-Fi
enabled devices.
You’re now connected to the blazingly fast, powerfully brilliant 4G Network. This guide will help you
understand your new Mobile Hotspot and all the things you can do with it at home or abroad. So let’s get
started.
Getting Started
BUTTONS AND INTERFACE
DESCRIPTION
1. SCREEN
Displays the menus and the status of your ZTE
Unite.
2. UP BUTTON
Scroll up to select the options.
3. DOWN BUTTON
Scroll down to select the options.
4. OK BUTTON
Confirm the highlighted selection.
When the ZTE Unite button is locked, press
once to light up the screen, and press again
to unlock.
5. POWER SWITCH
Power on/off your ZTE Unite.
6. MICRO USB PORT
Charge your ZTE Unite.
7. RESET BUTTON
Press and hold to restore your ZTE Unite to the
factory default settings.
Icon
Description
Icon
Description
Battery Status
4G Network
3G Network
CDMA 1X Network
Data Connected
Signal Strength
Roaming Signal Strength
Roaming
No SIM Card Inserted
PIN enabled SIM card or
Incorrect SIM card inserted
and
No Network Service
Number of current
Wi-Fi connections
System Message
New System Message
System Message Full
Settings
5 1 2 4 3 6 7
The following figure shows the appearance of your ZTE Unite, it is only for your reference. The actual
device may be different.
Screen Indicators
Hardware Installation
Installing the SIM Card
If you have not already done so, please follow these instructions for the installation of your new
SIM Card which is in the package:
Remove SIM Card from the outer card, being careful not to touch the gold contacts.
1.
Turn the power off. Remove the battery cover and take the battery out. Locate the SIM card
2.
slot. Hold the card so the writing on the back of the card is facing you and the gold contact
points are properly aligned with the SIM Card slot.
3. Insert SIM Card into the slot until it is fully inserted.
ATTENTION!
The SIM Card MUST remain in your ZTE Unite when in use. Once the SIM card has been
inserted into the ZTE Unite, do not remove!
Do not bend or scratch your SIM Card. Avoid exposing your SIM Card to static electricity,
water or dirt.
If your SIM card is separated from the ZTE Unite or damaged, your ZTE Unite will not
work. If you encounter any issue with your ZTE Unite, contact Customer Service at
1-888-944-9400 or visit your nearest U.S. Cellular® retail location.
Inserting and Charging the Battery
1. Use the thumb catch at the bottom of your ZTE Unite to open the battery cover and align the
battery contacts with the terminals in the battery compartment as shown. Push the battery
down until it clicks into place.
2. Place the battery cover over the battery compartment and press it downward until it clicks
into place.
3. Your ZTE Unite comes with wall charger. To charge: Plug one end of the wall charger into an
electrical outlet and the the other end into the ZTE Unite’s
MICRO USB PORT
.
NOTE
the temperature of the battery exceeds 113 °F/45 °C.
: The charge time varies depending upon the battery level. The device will stop charging if
Removing the SIM Card
1. Turn the power off. Remove the battery cover and take out the battery.
2. Gently remove the SIM Card from the SIM Card slot.
Connecting to the Internet
With your ZTE Unite, a wireless Internet connection can always be at your fingertips.
Connecting Wi-Fi Enabled Devices To Your ZTE Unite
NOTE
for the first time, or connect the device to the wall adapter for power.
The following should occur once you power on your ZTE Unite:
Follow these Steps:
1. Use your normal Wi-Fi application on your computer to establish a connection to your ZTE
:
It is recommended the battery be fully charged in order to use your ZTE Unite via Wi-Fi
Your ZTE Unite is powered as soon as you slide the
Power Switch
to On and the display
lights up.
Once your ZTE Unite is powered on and has been activated, it automatically connects to the
Internet provided that Mobile Broadband service is available and one or more Wi-Fi devices
are connected.
The Service (4G LTE, 3G, and 1X), Signal Strength , and Data Connected icons on
your ZTE Unite indicate it is in service and ready to connect.
Unite.
2. Look for the network (SSID) named “
USCC-EuFi891
”. There are XXXX digits unique to
your ZTE Unite following the network (SSID) name displayed.
3. Click
Connect
and enter the default password printed beside the battery compartment of your
ZTE Unite.
NOTE: Your password will also be displayed on the ZTE Unite screen each time the ZTE Unite
is powered on.
Accessing the Internet
After successfully establishing the connection between your ZTE Unite and Wi-Fi clients, you
can access the Internet in the Auto Connect, Manual Connect mode. The default mode is Auto Connect.
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.