Zte CruiseConnect Quick Start Manual

1

ZTE CruiseConnect™

Quick Start Guide

Application Powered by Modus®

2

Getting to Know Your OBD II Device

Appearance

The following figure is for your reference only.

1. Reset hole

2. micro-SIM card slot

3. Restart key

4. LED 1

5. LED 2

6. OBD interface

3

Getting to Know Your OBD II Device

Indicator lights

Indicator Status Description

LED 1(Power)

Green

blinking

Powered by the internal

battery.

Green

solid

Powered by the vehicle

battery.

LED 2(Signal)

Red

solid

Turn on but not register.

Green

solid

Registered to the 4G

network.

Green
blinking

Connected to the 4G LTE
network and data is being

transferred.

NOTE:

The charging temperature should be lower than 45℃.

.

4

Installing the micro-SIM card

1. Use the tray eject tool to take out the card tray.

2. Put the micro-SIM card into the card tray and s lip i t into the
card slot.

WARNING!
To avoid damage to the device, please do not use other kinds of
SIM cards, and do not use a non-standard mi cro-SIM card cut
from a SIM card. You can get the standard micro-SIM card from
your service provider.

3. Close the micro-SIM card cover.