No part of this publication may be excerpted, reproduced, translated or utilized in any
form or by any means, electronic or mechanical, including photocopying and microfilm,
without the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make
modifications on print errors or update specifications without prior notice.
To guarantee your phone is always in its best condition, read this manual carefully and
keep it for future reference. To ensure your safety, read Section 11: For Your Safety
thoroughly before using this phone for the first time.
Note: The pictures and icons presented in this manua l are m eant for illustra tive purposes
only and may not accurately represent the actual pictures and icons found on the phone.
Your phone contains the most up to date information.
What’s Included
Your ZTE C70 mobile phone package contains the following components. Check the
box carefully to ensure all items are present.
ZTE C70 Phone
Battery
User Manual
Charger
We, ZTE Corporation, declare that the product is packaged with the battery separate
in the box. The FCC ID label is placed on the mobile phone clearly visible to all
persons at the time of purchase.
8
Phone Overview
2
1
3
[1] Display Screen [5] Camera Lens
[2] Earpiece [6] Volume Keys
[3] USB Charger Port [7] Camera Key
[4] Earphone Jack [8] Battery Cover
7
6
9
ZTE C70 User Manual
5
8
4
ZTE C70 User Manual
Technical Specifications
Handset Type ZTE C70
Dimensions (L x W x H) 100 mm×48 mm×18 mm
Weight 116.7 g (including battery)
Continuous Standby Time 220 hours (subject to the network)
Continuous Talk Time 220 minutes (subject to the network)
Key Definitions
Left Soft Key – Press to access the function listed above the key.
From standby mode, press to view the Contact List.
Right Soft Key –Press to access the function listed above the key.
From standby mode, press to display the Messaging menu.
Send Key – Press to place or receive a call. From standby mode,
press to display the All Calls list.
End Key – Press to end calls or close applications. Press and hold
to power your phone on or off from standby mode.
10
~
ZTE C70 User Manual
Back Key – Press to return to the previous menu or screen. During
text entry mode, press to delete characters.
Speaker Key – Press to activate or deactivate the speakerphone
during voice calls.
Directional Key – Allows for navigation through phone menu
options and provides a shortcut to phone functions from standby
mode.
OK Key – Confirm actions and make selections. From standby
mode, press to display the main menu.
Alphanumeric Keys – Press to enter numbers and characters or to
select menu items. Press and hold the ‘1’ Key to launch Voice Mail
from standby mode.
* Key and # Key – Press and hold the * Key to turn Vibration Mode
on or off in standby mode. Press and hold the # Key to lock the
keypad in standby mode.
Volume Keys – Press up or down to adjust the master volume or
the earpiece volume during a call.
Camera Key – Press and hold to launch the camera from standby
mode.
11
ZTE C70 User Manual
Standby Mode
When the phone is ready for use, and you have not entered any characters, the phone
is in standby mode.
Top Display Icons: Displays the network
status, signal strength, battery power, etc.
Soft Keys and OK Key Function Area:
Displays the current functions for the Left
Soft Key, Right Soft Key and OK Key.
12
ZTE C70 User Manual
Display Icons
1x Service Airplane Mode
Alarm Battery Status
Bluetooth Bluetooth Connected
Calendar Call Connect
Earphone High SMS Priority
Incoming Call Missed Call
New SMS Message New Voice Mail
No Battery No Signal
Outgoing Call Ringer Off
Ringer On Roaming
Signal Strength Silent Mode
SMS full TTY Mode
Vibrate Alarm Vibration Mode
Vibration and Ringer Mode
13
ZTE C70 User Manual
2.Getting Started
This chapter outlines the steps required to set up your phone, power on and
activate on your service provider’s network, etc. Follow the procedure below stepby-step to get started.
Battery
Installing the Battery
1
1. Insert the battery by aligning the contacts (1) and then gently press it down until it
clicks into place (2).
2. Replace the battery cover and slide it into place (3).
2
14
3
ZTE C70 User Manual
Charging the Battery
Your phone is powered by a rechargeable battery. The battery is not fully charged
when you purchase your phone, but there may be enough power in the battery to turn
the phone on. Charge the battery with the procedure indicated below.
Note: For maximum battery performance, it is recommended that you completely charge
the battery before using the phone for the first time. A new battery’s full performance is
achieved only after three complete charge and discharge cycles.
1. Pull the rubber USB cover out of the USB port and move it out of the way.
2. Plug the USB data cable into the phone's USB Charger Port (as shown in the
illustration above) and the wall adapter end into an electrical outlet.
15
ZTE C70 User Manual
Removing the Battery
If you need to remove your phone’s battery, please follow the procedure ind icated below:
1
1. Slide and remove the back cover (1).
2. Insert your fingernail into the slot and lift the battery from the compartment (2) (3).
2
3
Powering On/Off Your Phone
To power on the phone, press and hold the End Key until the LCD screen lights
up.
If the handset lock code has been activated, the phone will prompt you to enter
the code. The default lock code for an inactivated phone is 0000. Once you have
16
ZTE C70 User Manual
activated your handset, the default lock code will be the last 4 digits of your
phone number.
It is also possible that the lock code has been updated by the user. If the
updated lock code is lost or forgotten, please contact your service provider.
To power off the phone, press and hold the End Key until the display turns off.
Warning: Do not power the phone on when wireless phone use is prohibited, or when
it may cause interference or danger.
Locking/Unlocking the Keypad
To prevent accidental pressing of keys, your phone is equipped with the keyguard
feature.
To lock the keypad, slide the phone closed; or press and hold the # Key in
standby mode.
To unlock the keypad, press the Right Soft Key [Unlock] and then press the
OK Key; or slide the phone up.
Connecting to the Network
After your phone is powered on, it will automatically search for the network.
17
ZTE C70 User Manual
Activating Your Phone
Before placing a call with your new phone, you must activate the phone on the network.
To activate the phone, dial *228 from the idle screen and follow the step-by-step
instructions. Once the display indicates that programming is successful, please restart
the handset. You may then place a call with your handset.
18
ZTE C70 User Manual
3. Calls
Making a Voice Call
1. Enter a phone number including the full area code in standby mode by using the
numeric keypad. If an incorrect character is entered, use the Back Key to delete
the digit. Pressing the Back Key for a while will erase all digits before the cursor.
2. Press the Send Key to make the voice call.
3. Press the End Key to end the call.
Note: To make an emergency call, enter the emergency number and press the Send
Key. If possible, remain stationary and keep the line connected.
Making a Speed Dial Call
1. In standby mode, press and hold the number key (2 to 9) for the Speed Dial entry
you would like to call and the call will be dialed automatically.
2. Press the End Key to end the call.
Note: The ‘1’ Key is assigned to the Voice Mail function.
Answering a Voice Call
1. When a voice call comes in, press the Send Key to answer it.
2. Press the End Key to end the call.
Note: If your phone is connected to a compatible Bluetooth headset, you can answer
or end the call by pressing the Send/End Key on the Bluetooth headset.
19
Loading...
+ 43 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.