ZTE C320 User Manual

Quick Start Guide

1

Getting to Know Your
Phone

Touch Screen

Volume Key Power Key

Indicator

Earpiece

Front Camera

Home Key

2

Menu KeyBack Key

Headset Jack

Charging/ USB Jack

Camera

Power Key



Press and hold to power on, select
phone modes, turn on/off airplane
mode, or power off.



Press to turn off or on the screen
display.

Home Key



Touch to return to the home screen
from any application or screen.

Menu Key



Touch to get the options for the
current screen.



Touch and hold to see recently used
applications.

Back Key



Touch to go to the previous screen.

Starting Up

Switch off your phone before installing or
replacing the battery or the SIM card.
The microSDHC™ card is optional and
can be install ed and removed while the
phone is turned on. Unmount the
microSDHC card before removing it.

1. Place your finger in the slot at the
bottom of the back cover to lift and
remove the co ver.

2. Hold the SIM card with its cut corner
oriented as shown and slip it into the
card holder.

3. Hold your microSDHC card with the
metal contacts facing down and slide
it into the microSDHC card slot.

4. Align the connectors on the phone
and the battery and slide the battery
into the compartment. Then gently
press the battery down unti l it is
secured.

Charging the Battery

1. Connect the adapter to the charging
jack. Ensure that the adap ter is
inserted with the corr ect orientation.
Do not force the connector into the
charging jack.

Volume Key



Press or hold to turn the volume up or

Back Cover

3

down.

5. Align the back cover with the back of
the phone and press the cover back
into place. Make sure all the tabs are
secure and there are no gaps around

4

5

the cover.

6

2. Connect the charger to a standard AC
power outlet.

3. Disconnect the charger w hen the
battery is fully charged.

7

Powering On/Off Your
Phone

Make sure the battery is charged before
powering on.



Press and hold the Power Key to
turn on your phone.



To turn it off, press and hold the
Power Key to open the options
menu. Touch Power off > OK.

8

Product Safety
Information

Do not use hand-held while
driving

For body-worn operation
maintain a separation of 15
mm

Small parts may cause a
choking hazard

This device may produce a
loud sound

Avoid contact with
magnetic media

Keep away from
pacemakers and other
personal medical devices

Switch off when instructed
in hospitals and medical
facilities

Switch off when instructed
in aircrafts and airports

Switch off in explosive
environments

9

Do not use while re-fuelling

EC DECLARATION OF
CONFORMITY

This device may produce a
bright or flashing light

Do not dispose of it in a fire

To prevent possible
hearing damage, do not
listen at high volume levels
for long periods.

Avoid Extreme
Temperatures

Avoid any contact with
liquid, keep it dry

Do not attempt to
disassemble

Only use approved
accessories

Do not rely on this device
for emergency
communications

10

It is hereby declared that following
designated product:

Product Type: WCDMA/GSM(GPRS)
Dual-Mode Digital Mobile Phone

Model No: ZTE Blade C320/ Blade C320

Product Description: WCDMA/GSM

(GPRS) Dual-Mode Digital Mobile Phone

Complies with the essential protection
requirements of Directives on Radio and
Telecommunication Terminal Equipment
(Directive 1999/5/EC)，Restriction of the
Certain Hazardous Substances in
electrical and electronic equipment
(Directive 2011/65/EU), Eco-design
Requirements for Energy-Related
Products (Directive 2009/125/EC) and
their amendments.

This declaration applies to all specimens
manufactured identical to the samples
submitted for testing/evaluation.

Assessment of compliance of the product
with the requirements relating to
Directive 1999/5/EC was performed by

11

PHOENIX TESTLAB GmbH (Notified Body
No.0700) and assessment of compliance
of the product with the requirements
relating to Directive 2011/65/EU was
performed by Intertek Testing Services
Ltd., Shanghai and Directive
2009/125/EC was performed by
Shenzhen Huatongwei International
Inspection Co.,Ltd. The assessments
were based on the following regulations
and standards:

Requirement Standard Report No.

EN 62209­1:2006 ,
EN 62209­2:2010

Health and
safety

EN 50360:
2001/A1:2012
EN 50566:
2013/AC:2014
EN 62479
:2010
EN 62311
:2008

I15D00069

-SAR

EN 60950

-1:2006
+A11:2009
+A1:2010+A1
2:2011
EN 50332-1

-2000;
EN50332

-2-2003

I15D00069

-SAF
I15D00069

-ACO

12

EMC

Radio
Spectrum

RoHS

ErP

EN 301 489-1
V1.9.2:2011
EN 301 489-7
V1.3.1: 2005
EN 301 489-3
V1.6.1;2012
EN 301489-17
V V2.2.1
:2012
EN 301 489

-24 V1.5.1
:2010

EN 301 511
V9.0.2
EN301
908-1/-2
V6.2.1
EN 300 328
V1.8.1
EN 300 440-1
V1.6.1
EN 300 440-2
V1.4.1

IEC
62321:2008
+2013

(EC) No
278/2009

13

I15D00069

-EMC

I15D00069

-RFG
I15D00069

-RFW
BL-SZ1560
085-601
BL-SZ1560
085-602
I15D00069

-RFB
I15D00069

-WLA
I15D00069

-GPS

150600035
SHA-001

TRS110100
58

This declaration is the responsibility of
the manufacturer:

ZTE Corporation

ZTE Plaza, Keji Road South, Hi-Tec h ,
Industrial Park, Nanshan District,
Shenzhen, Guangdong, 518057,
P.R.China

Authorised person signing for the
company:

Yao cuifeng Chief Quality Officer

Of ZTE Corporation

Name in block letters & position in the
company

Shenzhen, 2 July 2015

Place & date Legally valid signature

14