ZTE BLADE A110
Quick Start Guide
1
6 ZTE CORPORATION.
reproduced, translated
r update specifications in this guide without prior notice.
and the ZTE logos are trademarks of ZTE Corporation.
Android are trademarks of Google, Inc.
Bluetooth® trademark and logos are owned by the Bluetooth
and any use of such trademarks by ZTE Corporation is
microSDHC Logo is a trademark of SD-3C, LLC.
2
Other trademarks and trade names are the property of their
respective owners.
We offer self-service for our smart terminal device users. Please
visit the ZTE official website (at www.ztedevice.com) for more
information on self-service and supported product models.
Information on the website takes precedence.
Visit http://www.ztedevice.com to download the user manual. Just
click Service Support>user’s manual from the home page and
then select your location, product type, and name to search for
related support information.
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and
damages caused by unauthorized modifications of the software.
Version No.: R1.0
Edition Time: 2016.1
3
Know Your Phone
Indicator
Receiver
Front Camera
Touch Screen
Back Key
Sensor
Volume Key
Power Key
Home Key
Menu Key
4
Headset Jack
Volume Key
Power Key
Loud Speaker
Charging/USB Jack
Camera
Flash Lamp
Back Cover
5
Press and hold to power on, select phone modes, turn
on/off airplane mode, restart, or power off.
Press to wake up your phone.
Touch to return to the Home Screen from any
application or screen.
Hold to see Google search.
Touch and hold to see recently used applications.
Touch to go to the previous screen.
Key
Press or hold to turn the volume up or down.
6
Starting Up
Switch off your phone before installing or replacing the battery
or the SIM card. The microSDHC™ card is optional and can be
installed and removed while the phone is turned on. Unmount
the microSDHC card before removing it.
1. Place your finger in the slot at the bottom of the back cover to
lift and remove the cover.
2. Hold the SIM card with its cut corner oriented as shown and
slip it into the card holder.
7
micro-SIM card
Hold your microSDHC card with the metal contacts facing
down and slide it into the microSDHC card slot.
microSDHC
card
8
4、Align the connectors on the phone and the battery and
slide the battery into the compartment. Then gently press
the battery down until it is secured.
5、Align the back cover with the back of the phone and press
the cover back into place. Make sure all the tabs are secure
and there are no gaps around the cover.
Charging the Battery
1. Connect the adapter to the charging jack. Ensure that the
adapter is inserted with the correct orientation. Do not force
the connector into the charging jack.
9
Connect the charger to a standard AC power outlet.
Disconnect the charger when the battery is fully charged.
before powering on.
Press and hold the Power Key to turn on your phone.
10
· To turn it off, press and hold the Power Key to open the
damage, do not listen at high
options menu. Touch Power off.
Product Safety Information
Do not use hand-held
while driving
Do not use while re-fuelling
For body-worn
operation maintain a
separation of 10 mm
Small parts may cause
a choking hazard
This device may
produce a loud sound
Avoid contact with
magnetic media
This device may produce a
bright or flashing light
Do not dispose of it in a fire
To prevent possible hearing
volume levels for long
periods.
Avoid Extreme Temperatures
11
Keep away from
Avoid any contact with liquid,
Do not rely on this device for
pacemakers and other
personal medical
devices
keep it dry
Switch off when
instructed in hospitals
and medical facilities
Switch off when
instructed in aircrafts
and airports
Switch off in explosive
environments
Do not attempt to
disassemble
Only use approved
accessories
emergency communications
12
§ 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
13
the equipment off and on, the user is
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
Connect the equipment into an outlet on a circuit different
Consult the dealer or an experienced radio/TV technician
Body Operation
1.0 cm must be maintained between
-party belt-clips, holsters, and similar accessories
should not contain any metallic
14
rt operations.
requirements may not comply with RF exposure
requirements and should be avoided. Use only the
supplied or an approved antenna.
15
Loading...