ZETTLER AZ833 Datasheet

CONTACTS

Arrangement DPDT (2 Form C)

Bifurcated crossbar contacts

Ratings Resistive load:

Max. switched power: 60 W or 62.5 VA
Max. switched current: 2.0 A
Max. switched voltage:220 VDC or 250 VAC

Rated Load

UL/CSA 0.5 A at 125 VAC

(Pending) 2.0 A at 30 VDC

0.3 A at 110 VDC

Material Silver nickel gold plated

Silver palladium available upon request

ZETTLERelectronics

Telephone [phone] Fax [phone]

Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [e-mail]

1998-12-15

AZ833

GENERAL DATA

Life Expectancy Minimum operations

Mechanical 1 x 10

8

Electrical 1 x 105at 0.5 A, 125 VAC, resistive

2 x 105at 1.0 A, 30 VDC, resistive

Operate Time 3 ms at nominal coil voltage

(typical)

Release Time (typical) 2 ms at nominal coil voltage

(with no coil suppression)

Bounce (typical) At 10 mA contact current

1 ms at operate or release

Dielectric Strength See table
(at sea level)

Dropout Greater than 10% of nominal coil voltage
Insulation Resistance 109ohms min. at 25°C, 500 VDC,

50% RH

Ambient Temperature At nominal coil voltage

Operating -40°C (-40°F) to 85°C (185°F)

Storage -40°C (-40°F) to 110°C (230°F)
Vibration Operational, 35 g, 10–1000 Hz
Shock Operational, 50 g min., 11 ms

Non-destructive, 150 g min., 11 ms

Max. Solder Temp. See soldering profile
Temp./Time

Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 2.3 grams

Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.

MICROMINIATURE
POLARIZED RELAY

FEATURES

• Microminiature size: up to 50% less board area than

previous generation telecom relays

• High dielectric and surge voltage:

2.5 KV surge (per Bellcore TA–NWT–001089)

1.5 KV surge (per FCC Part 68)
1,000 Vrms, open contacts

• Low power consumption: 79 mW pickup

• Stable contact resistance for low level signal

switching

• Epoxy sealed for automatic wave soldering and
cleaning

• UL and CSA approval pending

• All plastics meet UL94 V–O, 30 min. oxygen index

COIL (Polarized)

Power

At Pickup Voltage 79 mW
(typical)

Max. Continuous 1.0 W at 20°C (68°F)
Dissipation 0.78 W at 40°C (104°F)

Temperature Rise At nominal coil voltage

18°C (32°F)

Temperature Max. 110°C (230°F)

NOTES

1. All values at 20°C (68°F).

2. Relay may pull in with less than “Must Operate” value.

3. Relay has fixed coil polarity.

4. Specifications subject to change without notice.

1998-12-15

ZETTLERelectronics

Telephone [phone] Fax [phone]

Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [e-mail]

AZ833

RELAY ORDERING DATA

STANDARD RELAYS Order Number

Nominal Coil Max. Continuous Coil Resistance Must Operate THT SMT SMT

VDC VDC ± 10% VDC Through Hole Long Short

3 6.5 64.3 2.25 AZ833–3DE AZ833S1–3DE AZ833S2–3DE

4.5 9.8 145 3.38 AZ833–4.5DE AZ833S1–4.5DE AZ833S2–4.5DE
5 10.9 178 3.75 AZ833–5DE AZ833S1–5DE AZ833S2–5DE
6 13.0 257 4.50 AZ833–6DE AZ833S1–6DE AZ833S2–6DE

9 19.6 578 6.75 AZ833–9DE AZ833S1–9DE AZ833S2–9DE
12 26.2 1,029 9.00 AZ833–12DE AZ833S1–12DE AZ833S2–12DE
24 52.3 4114 18.00 AZ833–24DE AZ833S1–24DE AZ833S2–24DE

INITIAL DIELECTRIC STRENGTH (minimum) SURGE

VRMS, 1 min. Peak (V) Rise Time (µS) DecayTime* (9µS) (1/2peak)

Between open contacts 1,000 1,500 10 160
Between contact sets 1,000 1,500 2 160
Between coil and contacts 1,800 2,500 2 10

LOAD LIMIT CURVE

* Decay time measured from beginning of surge.

RECOMMENDED SOLDERING PROFILE

(Convection Soldering)

V