customer service 1.888.880.8368
Duct Cover Short, Long
Z1C-00HZ
Z1C-01HZ
For use with Horizon range hood
|
|
Mounting the duct cover |
Pag. 3 |
|
|
|
|
|
|
|
|
Fixation des cheminees |
Pag. 4 |
|
|
|
|
|
|
|
|
Fijación de las chimeneas |
Pag. 5 |
|
|
|
|
|
|
|
|
Fissaggio dei camini |
Pag. 6 |
|
|
|
|
||
|
|
|
||
|
|
|
|
|
www.zephyronline.com
DUCT COVER EXTENSION SPECIFICATION
Longer size: Min 44-7/8" - Max 57-7/8" |
Standard size: Min 35-7/8"- Max 44-7/8" |
- 2 -
MOUNTING THE DUCT COVER
1.Unclip the top cover. Fig.1
2.Unscrew and remove the four clips on the hood Fig. 2
3.Position the chimneys on the hood as described in fig.3 and fasten the parts using the (4) screws provided.
4.Place correct size ducting for your installation (not supplied) to the hood and secure to the blower collar with aluminum duct tape. Fig. 4
5.Secure duct cover bracket to top of wall just below the ceiling observing the distance shown in Fig.5, and using (2) screws provided. See Fig.6
6.Extend top duct cover up and secure to the duct cover bracket using (2) screws. See Fig. 7
Installation - Mounting the Duct Cover
- 3 -