Zephyr Z0FC006 Optional Accessories

Optional Accessories

Accessory Description

Model DDA-0002

MODELS DDS-0030 DDS-0036

MODELS MUA008A MUA010A

REMOTE UP/DOWN CONTROL

Use when you cannot reach the UP/ DOWN Button on the downdraft chimney.

Can be located on counter top, face of cabinetry or on the side cabinet of an island. Cut-out size: 2 1/4" H x 2" W

Cannot be used where remote control will interfere with cooking, where hot pans could be set, or where hot liquids could be spilled on the control.

(Remote wiring connects with 6-pin connection)

GAS COOKTOP SEAL KIT

Recommended for use with all gas cooktops. Includes trim bracket and trim seal.

30", 36" widths.

MAKE-UP AIR DAMPER

Use to provide make-up air (when called for) to keep the home comfortable by allowing the downdraft to operate at optimum levels.

Accessory Description

MODEL 11030132

MODEL ZRC-00LF

MODEL Z0F-C006

MODEL AK00070

EXTENSION CABLE - 5-FT.

Use where electrical panel is remotely mounted. Extends electrical panel cable an additional 5 feet.

NON-DUCT RECIRCULATING KIT

Use where ducting is not feasible or available. Mount to toe kick or base of a cabinet and attach directly to Model DBI-600A Blower using 8" round duct. Kit can be rotated so that the exhaust is not directly at your feet. Includes recirculating ﬁlter and decorative cover plate.

RECIRCULATION FILTER REPLACEMENT

Replacement ﬁlter for ZRC-00LF NonDuct Recirculating Kit. Use to effectively capture cooking contaminants.

1-7/8" X 19” TO 8" ROUND TRANSITION

Rectangular to 8" round transition for left, right, or rear exhaust - using Model DBI-600A Blower. Can be attached to downdraft unit or rectangular duct (AK00072). Includes S-clips for easy, secure attachment.

MODELS DDT-0030 DDT-0036

RANGE TRIM KIT

Use with free-standing range - where a gap is present between back of range and downdraft.

30", 36" widths.

MODEL AK00071

MODEL AK00072

1-7/8" X 19" TO 10" ROUND TRANSITION

Rectangular to 10" round transition for left, right, or rear exhaust - using external blower. Can be attached to downdraft unit or rectangular duct (AK00072).

RECTANGULAR ADAPTOR FOR 1-7/8" X 19"

Use to connect 1-7/8" x 19" rectangular duct directly to downdraft when using side or rear exhaust.