Zephyr Z1C-00LL, Z1C-01LL, Duct Cover Extension Z1C-01LL User Manual [en, it, fr, es]

Loading...

customer service 1.888.880.8368

Duct Cover Extension Short, Long

Z1C-00LL

Z1C-01LL

For use with Layers Is. and Duo Is. range hood

 

 

Mounting the duct cover

Pag. 4

 

 

 

 

 

 

 

 

Fixation des cheminees

Pag. 6

 

 

 

 

 

 

 

 

Fijación de las chimeneas

Pag. 8

 

 

 

 

 

 

 

 

Fissaggio dei camini

Pag. 10

 

 

 

 

 

 

 

 

 

 

 

 

www.zephyronline.com

DUCT COVER EXTENSION SPECIFICATION

LAYERS IS.

- Max 79"

Max 49"

53,5"

37,5"-

Longer size: Min

Short size: Min

DUO IS.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

53,5" - Max 79"

37,5"- Max 49"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Longer size: Min

Short size: Min

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- 2 -

KIT Z1C-00LL Duct Cover Short

KIT Z1C-01LL Duct Cover Long

- 3 -

Installation - Mounting the Duct Cover

 

 

 

 

www.zephyronline.com

MOUNTING THE DUCT COVER

 

1. Remove the (2) screws to unlock

 

the top support frame from the

 

bottom

support

frame.

Fig.1.

 

Adjust the height by referring to

 

the diagram in Fig. 2. Secure the

 

support frames together with (2)

 

screws per extension arm (Tot. 8).

 

Fig.3

 

 

 

 

2. Place correct size ducting for your

 

installation (not supplied) on top

 

of hood and secure to the blower

X

collar with aluminum duct tape.

 

The ducting should be long enou-

4,3 - 1/16"

gh so it protrudes out the top of

C

the support frame and extends

24"

into the attic to connect after the

 

hood is installed. Fig.4

 

B

 

 

 

 

3. Place assembled support frames

 

on top of hood and secure it to the

X = C - (4,3-1/16" + 24" + B)

hood body using 8 screws. Fig.5

 

4. Place duct covers over assembled

 

support frame until they rest on

 

the hood body. Fig.6

 

 

 

5. Position hole template on the ceiling paying attention that the arrow is positioned on the same side as the range hood controls. Fig.7

- 4 -

+ 8 hidden pages