T4521-93120 (206)
HEDGE TRIMMERS
eHT750S
eHT600D
NOTE :
1.Use KOMATSU ZENOAH genuine parts specified in the parts list for repair and/or replacement.
2.KOMATSU ZENOAH does not warrant the machines, those which have been damaged by the use of any parts other than those specified by the company.
3.When placing orders of parts for repair and/or replacement, check if the model name and the serial number are suitable to those specified in the parts list, then use parts number described in the parts list.
4.The contents described in the parts list may change due to improvement.
5.The parts for the machine shall be supplied within ten (10) years after the machine is discontinued. [It is possible that some specific parts may be subject to change of their delivery term and list price within the limit of ten (10) years after the machine is discontinued. And it is also possible that some parts may be available even after the limit of ten (10) years.]
APPLICABLE SERIAL NUMBERS : 200101 and up |
June 2002 |
eHT750S
Fig.1 eHT750S DRIVE UNIT
Fig.1 eHT750S DRIVE UNIT
Key# |
PART NUMBER |
DESCRIPTION |
Q’TY |
NOTE |
|
/UNIT |
|||||
|
|
|
|
||
1 |
T4521-91000 |
BLADE ASS'Y |
1 |
|
|
2 |
T4503-11111 |
• PLATE, upper |
1 |
|
|
3 |
T4503-11120 |
• PLATE, lower |
1 |
|
|
4 |
T4521-11210 |
• BLADE, lower |
1 |
|
|
5 |
T4521-11220 |
• BLADE, upper |
1 |
|
|
6 |
T4521-11310 |
• SPACER |
9 |
|
|
7 |
T4503-11321 |
• WASHER |
3 |
|
|
8 |
T4521-11330 |
• SCREW |
4 |
|
|
9 |
T1000-13170 |
• BOLT |
5 |
|
|
10 |
1610-13120 |
• NUT |
1 |
|
|
11 |
T4519-11230 |
• COVER |
1 |
|
|
12 |
T4503-12112 |
PLATE |
1 |
|
|
13 |
T4521-11330 |
SCREW |
4 |
|
|
14 |
T4503-21100 |
GEARCASE COMP |
1 |
|
|
15 |
06004-06001 |
BEARING |
2 |
|
|
16 |
04065-02812 |
RING |
1 |
|
|
17 |
T4503-21210 |
GEARCASE-BOTTOM |
1 |
|
|
18 |
T4521-21220 |
GASKET |
1 |
|
|
19 |
T4519-52110 |
GEAR-DRIVE |
1 |
|
|
20 |
T4503-52130 |
SPACER |
1 |
|
|
21 |
T4503-52140 |
WASHER |
1 |
|
|
22 |
T4503-52150 |
BOLT |
1 |
|
|
23 |
T4503-52120 |
DRUM |
1 |
|
|
24 |
T4503-52161 |
WASHER |
1 |
|
|
25 |
T4521-42210 |
GEAR |
1 |
|
|
26 |
T4503-42110 |
ROD |
2 |
|
|
27 |
T4503-42310 |
PLATE |
2 |
|
|
28 |
3199-13350 |
FITTING |
1 |
|
|
29 |
T4503-42410 |
FELT |
1 |
|
|
30 |
3350-15250 |
BOLT |
6 |
|
|
31 |
3544-11510 |
BOLT |
3 |
|
|
32 |
T4503-31100 |
HANDLE-R COMP |
1 |
|
|
33 |
T4503-31210 |
ABSORBER |
4 |
|
|
34 |
T4503-31220 |
HOLDER |
2 |
|
|
35 |
T4503-31230 |
CAP |
1 |
|
|
36 |
T4503-32100 |
HANDLE-L COMP |
1 |
|
|
37 |
6420-14302 |
LEVER ASS'Y |
1 |
|
|
38 |
T3040-14511 |
COLLAR |
1 |
|
|
39 |
T4503-83100 |
CABLE COMP |
1 |
|
|
40 |
6542-14510 |
TUBE |
1 |
|
|
41 |
1565-72311 |
CLAMP |
1 |
|
|
42 |
T4503-31210 |
ABSORBER |
4 |
|
|
43 |
T4503-32220 |
PIPE |
2 |
|
|
44 |
T4503-32230 |
WASHER |
2 |
|
|
45 |
01252-30535 |
BOLT |
2 |
|
|
|
|
|
|
|
|
|
|
eHT750S |
||
|
|
|
|
|
|
Key# |
PART NUMBER |
DESCRIPTION |
Q’TY |
NOTE |
|
/UNIT |
|||||
|
|
|
|
||
46 |
T4519-12210 |
LABEL |
1 |
|
|
47 |
3320-91140 |
WRENCH |
1 |
|
|
48 |
09007-00425 |
WRENCH |
1 |
|
|
|
|
|
|
|
|
eHT600D
Fig.2 eHT600D DRIVE UNIT
Loading...