Zebra Technologies MC67NA User Manual

Zebra reserves the right to make changes to any product to improve reliability, function, or design.
Zebra does not assume any product liability arising out of, or in connection with, the application or
use of any product, circuit, or application described herein. No license is granted, either expressly
or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to
any combination, system, apparatus, machine, material, method, or process in which Zebra
products might be used. An implied license exists only for equipment, circuits, and subsystems
contained in Zebra products.

Warranty

For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty.

Service Information

If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If
there is a problem with the equipment, they will contact the Zebra Support Center at:
http://www.zebra.com/support.

For the latest version of this guide go to: http://www.zebra.com/support.

MC67

REGULATORY
GUIDE

Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com

Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many
jurisdictions worldwide. All other trademarks are the property of their respective owners.
© 2015 ZIH Corp and/or its affiliates. All rights reserved.

72-161171-05 Rev. A — April 2015

Regulatory Information

This guide applies to the Model Number: MC67NA and MC67ND.
All Zebra devices are designed to be compliant with rules and regulations in locations they are sold
and will be labeled as required.
Local language translations are available at the following website: http://www.zebra.com/doc
Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the

user's authority to operate the equipment.

Declared maximum operating temperature: 50°C.

UL Listed Products with GPS

Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the Global
Positioning System (GPS) hardware, operating software or other aspects of this product. UL has only
tested for fire, shock or casualties as outlined in UL’s Standard(s) for Safety for Information Technology
Equipment, UL60950-1. UL Certification does not cover the performance or reliability of the GPS
hardware and GPS operating software. UL MAKES NO REPRESENTATIONS, WARRANTIES OR
ERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY
GPS RELATED FUNCTIONS OF THIS PRODUCT.

Bluetooth®Wireless Technology

This is an approved Bluetooth product. For more information or to view the End Product Listing, please
visit http://www.bluetooth.org/tpg/listings.cfm.

Wireless Devices Country Approvals

Regulatory markings, subject to certification, are applied to the device signifying the radio(s) are
approved for use in the following countries: United States, Canada, Australia, and Europe

1

.

Please refer to the Zebra Declaration of Conformity (DoC) for details of other country markings. This is
available at http://www.zebra.com/doc.

Note 1: For 2.4 GHz or 5 GHz products: Europe includes Austria, Belgium, Bulgaria, Croatia, Czech
Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

Country Roaming

This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the
product operates on the correct channels for the particular country of use.

Ad-Hoc Operation (2.4 GHz band)

Ad-Hoc operation is limited to Channels 1-11 (2412-2462 MHz).

Frequency of Operation – IC
Industry Canada Statement

Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for
harmful interference to co-Channel mobile satellite systems. High power radars are allocated as
primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars
could cause interference and/or damage to LE-LAN devices.

Avertissement: Le dispositive fonctionnant dans la bande 5150-5250 MHz est réservé uniquement
pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de
satellites mobiles utilisant les mêmes canaux.

Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont
la priorité) pour les bands 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du
brouillage et/ou des dommages aux dispositifs LAN-EL.

Health and Safety Recommendations

Ergonomic Recommendations

• Reduce or eliminate repetitive motion

• Maintain a neutral postures

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures

• Alternate hands whenever possible when performing a repetitive task.

Vehicle Installation

RF signals may affect improperly installed or inadequately shielded electronic systems in motor
vehicles (including safety systems). Check with the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any equipment that has been added to your
vehicle.

An air bag inflates with great force. DO NOT place objects, including either installed or portable
wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates, serious injury could result.

Position your device within easy reach. Be able to access your device without removing your eyes
from the road.

Note: Connection to an alert device that will cause a vehicle horn to sound or lights to flash, on receipt
of a call on public roads, is not permitted.

IMPORTANT
Before installing or using, check state and local laws regarding windshield mounting and use of

equipment.
For safe installation:

• Do not put your phone in a location that obstructs the drivers vision or interferes with the operation
of the Vehicle.

• Do not cover an airbag.

Safety on the Road

Do not take notes or use the device while driving. Jotting down a “to do” list or flipping through your
address book takes attention away from your primary responsibility, driving safely.

When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and
regulations on the use of wireless devices in the areas where you drive. Always obey them.

When using a wireless device behind the wheel of a car, practice good common sense and remember
the following tips:

1. Get to know your wireless device and any features such as speed dial and redial. If available, these
features help you to place your call without taking your attention off the road.

2. When available, use a hands free device.

3. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be
hazardous.

4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road and your mirrors, then continue.

5. Do not engage in stressful or emotional conversations that may be distracting. Make people you
are talking with aware you are driving and suspend conversations that have the potential to divert
your attention from the road.

6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2
in Europe) or other local emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless
of any security codes and depending on a network, with or without a SIM card inserted.

7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1­1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do
for you.

8. Call roadside assistance or a special non-emergency wireless assistance number when necessary.
If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance
or other special non-emergency wireless number.

“The wireless industry reminds you to use your device / phone safely when driving.”

Please observe

all warning notices with regard to the usage of wireless devices.

Potentially Hazardous Atmospheres - Vehicles Use

You are reminded of the need to observe restrictions on the use of radio devices in fuel depots,
chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or
metal powders) and any other area where you would normally be advised to turn off your vehicle
engine.

Safety in Aircraft

Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your
device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight.

Wireless devices transmit radio frequency energy and may affect medical electrical equipment.
Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or

healthcare facilities. These requests are designed to prevent possible interference with sensitive
medical equipment.

Pacemakers

Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between
a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with independent research and recommendations by Wireless
Technology Research.

Persons with pacemakers:

• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned
ON.

• Should not carry the device in a breast pocket.

• Should use the ear furthest from the pacemaker to minimize the potential for interference.

• If you have any reason to suspect that interference is taking place, turn OFF your device.

Other Medical Devices

Please consult your physician or the manufacturer of the medical device, to determine if the operation
of your wireless product may interfere with the medical device.

Safety Information

Reducing RF Exposure - Use Properly

Only operate the device in accordance with the instructions supplied.

International

The device complies with internationally recognized standards covering human exposure to
electromagnetic fields from radio devices. For information on “International” human exposure to
electromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at
http://www.zebra.com/doc.

For further information on the safety of RF energy from wireless devices - see
http://www.zebra.com/corporateresponsibility, located under Wireless Communications and Health.

Europe

Handheld Devices

This device was tested for typical body-worn operation. Use only Zebra tested and approved belt-clips,
holsters, and similar accessories to ensure EU Compliance.

US and Canada
Phones (placed to ear or used with headset)

Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure FCC
Compliance. The use of third-party belt-clips, holsters, and similar accessories may not comply with
FCC RF exposure compliance requirements, and should be avoided. The FCC has granted an
Equipment Authorization for these model phones with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR information on these model phones is on file
with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid.

The MC67NA/MC67ND are not approved to be used with any VoIP application using Wide Area
Network (WAN). Use of such an application will render the operation of this device illegal.

Co-located Statement

To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must
not be co-located or operating in conjunction with any other transmitter/antenna except those already
approved in this filing.

Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such
as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2
laser is not known to be harmful.

CAUTION: Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous laser light exposure.

Scanner Labeling

Labels read:

1. CAUTION- CLASS 2 LASER/LED LIGHT WHEN OPEN. DO NOT STARE INTO BEAM.

2. LASER/LED LIGHT- DO NOT STARE INTO BEAM. CLASS 2 LASER/ LED PRODUCT.

3. COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO
LASER NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC 60825-1 (Ed.1.2, 2.0); EN60825­1:2007 & IEC62471 (Ed.1.0); EN62471:2008.

Power Supply

Use ONLY an approved UL LISTED ITE (IEC/EN 60950-1, LPS) power supply with electrical ratings:
Output 5.4 VDC, min 3 A, with a maximum ambient temperature of at least 50 °C. Use of alternative
power supply will invalidate any approvals given to this unit and may be dangerous.

Batteries

Taiwan - Recycling

EPA (Environmental Protection Administration) requires dry battery producing or
importing firms in accordance with Article 15 of the Waste Disposal Act are
required to indicate the recycling marks on the batteries used in sales, giveaway
or promotion. Contact a qualified Taiwanese recycler for proper battery disposal.

Battery Information

Use only Zebra approved batteries.
Zebra rechargeable battery packs are designed and constructed to the highest standards within the

industry.
However, there are limitations to how long a battery can operate or be stored before needing

replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh
environmental conditions and severe drops.

When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality
may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to
prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for
one year or longer, the charge level should be verified at least once a year and charged to half of full
charge.

Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased

separately or included as part of the mobile computer. For more information on Zebra batteries, please
visit: https://www.zebra.com/batterybasics

Battery Safety Guidelines

• The area in which the units are charged should be clear of debris and combustible materials or

chemicals. Particular care should be taken where the device is charged in a non commercial
environment.

• Follow battery usage, storage, and charging guidelines found in the User Guide.

• Improper battery use may result in a fire, explosion, or other hazard.

• To charge the mobile device battery, the battery and charger temperatures must be between +32ºF

and +104ºF (0ºC and +40ºC)

• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may

present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the
compatibility of a battery or a charger, contact Zebra Support.

• To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1, all

batteries will carry a hologram. Do not fit any battery without checking it has the authentication
hologram.

• Do not disassemble or open, crush, bend or deform, puncture, or shred.

• Severe impact from dropping any battery-operated device on a hard surface could cause the

battery to overheat.

• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.

• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or

expose to water or other liquids, or expose to fire, explosion, or other hazard.

• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked

vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.

• Battery usage by children should be supervised.

• Please follow local regulations to promptly dispose of used re-chargeable batteries.

• Do not dispose of batteries in fire.

• Seek medical advice immediately if a battery has been swallowed.

• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If

contact has been made, wash the affected area with large amounts of water and seek medical
advice.

• If you suspect damage to your equipment or battery, contact Zebra Global Customer Support to

arrange for inspection.

Use with Hearing Aids

When some wireless devices are used near some hearing devices (hearing aids and cochlear
implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and wireless devices also vary in the amount of

CAUTION Only use Zebra approved and UL Listed accessories, battery packs and battery

chargers.

Do NOT attempt to charge damp/wet mobile computers or batteries. All components
must be dry before connecting to an external power source.

Operation of the device without regulatory approval is illegal.

CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the

recommendations below. Consult with your local Health & Safety Manager to ensure
that you are adhering to your company’s safety programs to prevent employee
injury.

Warnings for Use of Wireless Devices

Safety in Hospitals

RF Exposure Guidelines

VOIP Warning

Laser Devices

3

2

1

Review Copy

interference they generate. In the event of interference you may want to consult your hearing aid
supplier to discuss solutions.

The wireless telephone industry has developed ratings for some of their mobile phones, to assist
hearing device users in finding phones that may be compatible with their hearing devices. Not all
phones have been rated. Zebra terminals that are rated have the rating included on the Declaration of
Conformity (DoC) at http://www.zebra.com/doc.

The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing
loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a
rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it
for your personal needs.

M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less
interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two
ratings.

T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/
higher of the two ratings. (Note that not all hearing devices have telecoils in them.)

Hearing devices may also be measured for immunity to this type of interference. Your hearing device
manufacturer or hearing health professional may help you find results for your hearing device. The
more immune your hearing aid is, the less likely you are to experience interference noise from mobile
phones.

Radio Frequency Interference Requirements-FCC

Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

• Consult the dealer or an experienced radio/TV technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Radio Frequency Interference Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio Transmitters

For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:

• Restricted Band 5.60 - 5.65 GHz
This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne
doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y
compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Label Marking: The Term “IC:” before the radio certification only signifies that Industry Canada
technical specifications were met.

Frequency of Operation

The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:

• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz
Bluetooth® Wireless Technology for use through the EEA has the following restrictions:

• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz

Statement of Compliance

Zebra hereby, declares that this device is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity may be
obtained from http://www.zebra.com/doc.

Other Countries

Australia

Use of 5 GHz RLAN's in Australia is restricted in the following band 5.50 - 5.65GHz.
To comply with Australian legislation, please ensure the device is set to “Wakeup” based on

“Keyboard.”

Brazil

Declarações Regulamentares
Nota: “A marca de certificação se aplica ao Transceptor, modelo MC67NA. Este equipamento opera

em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de
estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.”

Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br
Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela

Resolução n°242/2000 e atende aos requisitos técnicos aplicados, incluindo os limites de exposição
da Taxa de Absorção Específica referente a campos elétricos, magnéticos e eletromagnéticos de
radiofrequência, de acordo com as Resoluções n° 303/2002 e 533/2009.

Este dispositivo está em conformidade com as diretrizes de exposição à radiofrequência quando
posicionado pelo menos 0 centímetros de distância do corpo. Para maiores informações, consulte o
site da Anatel.

Chile

"Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones,
relativa a radiaciones electromagnéticas."

Hong Kong

In accordance with HKTA1039, the band 5.15 GHz - 5.35 GHz is for indoor operation only.

Mexico

Restrict Frequency Range to: 2.450 – 2.4835 GHz.

La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este
equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

Taiwan

咉䋲

քࣕ⦽䴱⌘䕱ሺᙝ䴱ₕ㇗⨼䗜⌋
ㅢӂồ
㏉ශᕅ䃃䅿Ṳҁքࣕ⦽ሺ乱䴱ₕθ䶔㏉䁧θޢȽ୼㲕ᡌֵ⭞㘻ൽуᗍ󰪜㠠䇀ᴪ乱⦽Ƚࣖཝ
ࣕ⦽ᡌ䇀ᴪ৕䁣䀾ҁ⢯ᙝࣕ㜳Ⱦ
ㅢ഑ồ
քࣕ⦽ሺ乱䴱ₕҁֵ⭞уᗍᖧ丵休㡠ᆿޞᒨ᬴⌋䙐ؗχ㏉Ⲳ⨴ᴿᒨ᬴⨴䊗ᱸθ៿㄁঩ڒ⭞θ
ќ᭯஺㠩❗ᒨ᬴ᱸᯯᗍ㒲㓂ֵ⭞Ⱦ
ࢃ主⌋䙐ؗθ᤽ד䴱ؗ㿅ᇐ֒ᾣҁ❗㐐䴱䙐ؗȾ
քࣕ⦽ሺ乱䴱ₕ举ᘃ⌋䙐ؗᡌᐛᾣȽ〇ᆮ䟡ⱸ⭞䴱⌘䕱ሺᙝ䴱ₕ䁣ۏҁᒨ᬴Ⱦ

൞ 5.25-5.35 〣䎡乱ᑬޝᬃ֒ҁ❗㐐䋽䁀۩䕮䁣ۏθ䲆᯲ᇚޝֵ⭞Ⱦ
⑑ቇ䴱⻷⌘ᖧ丵θ䄁࿛䚟ֵ⭞

Turkey

Bu cihaz Türkçe karakterlerin tamamını ihtiva eden ETSI TS 123.038 V8.0.0 (veya sonraki sürümün kodu) ve
ETSI TS 123.040 V8.1.0 (veya sonraki sürümün kodu) teknik özelliklerine uygundur.

Ukraine

Дане обладнання відповідає вимогам технічного регламенту №1057, № 2008 на обмеження щодо
використання деяких небезпечних речовин в електричних та електронних пристроях.

South Korea

䚨␭ ⱨ㉔㉘⽸⏈ 㟨㟝 㩅 㤸䑀䝰㐔 ᴴ⏙㉥㢨 㢼㢀
␭䚨 ⱨ㉔㉘⽸ ⏈㤸䑀䝰 㐔 ᴴ⏙㉥㢨 㢼㡰⳴⦐ 㢬⮹㙼㤸Ḱ Ḵ⥜═ ㉐⽸㏘⏈ 䚔 ㍌ 㛺㏩⏼␘ .

Thailand

ࡳ࠻࡚࡮ࡻࡤ࠾ࡵࡎ࡚࠻ࡘࡐࡩ࠻ࡘࡴ࡜ࡧࡤࡒ࠸࡚ࡊࡐ࡬ࡼࡘ࡬࠻࡞ࡩࡘࡡࡤࡋ࠻࡜ࡼࡤ࠾ࡌࡩࡘ࠹ࡼࡤ࠸ࡪࡢࡐࡋ࠹ࡤ࠾࠸ࡎࡁ 

English: For EU Customers: All products at the end of their life must be returned to Zebra for
recycling. For information on how to return product, please go to: http://www.zebra.com/weee.

Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être
retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits,
consultez : http://www.zebra.com/weee.

Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final
de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un
producto, visite: http://www.zebra.com/weee.

Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie
unter http://www.zebra.com/weee.

Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono
essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web: http://www.zebra.com/weee.

Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para
reciclagem. Para obter informações sobre como devolver o produto, visite:
http://www.zebra.com/weee.

Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar
Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer
informatie over het terugzenden van producten.

Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy
Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej
http://www.zebra.com/weee.

Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit
spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce:
http://www.zebra.com/weee.

Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil
Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: http://
www.zebra.com/weee.

Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni
újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson
el a http://www.zebra.com/weee weboldalra.

Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za
reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.

Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för
återvinning. Information om hur du returnerar produkten finns på
http://www.zebra.com/weee.

Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra­yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://
www.zebra.com/weee.

Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs
oplysningerne om returnering af produkter på: http://www.zebra.com/recycling/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να
επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή
ενός προϊόντ

ος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο.

Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu
rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.zebra.com/weee.

Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na: http://
www.zebra.com/weee.

Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į
kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.

Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra
otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra,

lūdzu, skatiet: http://

www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade

edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://
www.zebra.com/weee.

TURKISH WEEE Statement of Compliance

EEE Yönetmeliğine Uygundur

END-USER LICENSE AGREEMENT

These license terms are an agreement between you and Symbol Technologies, Inc.
(“Company”). Please read them. They apply to the software included on this device. The
software also includes any separate media on which you received the software.

The software on this device includes software licensed by Company from Microsoft Corporation
or its affiliate.

The terms also apply to any:

• updates,

• supplements,

• Internet-based services, and

• support services

for this software, unless other terms accompany those items. If so, those terms apply.

As described below, using some features also operates as your consent to the transmission of
certain standard computer information for Internet-based services.

By using the software, including use on this device, you accept these terms. If you do not accept
them, do not use the device or software. Instead, contact Company to determine its return policy
for a refund or credit.

WARNING: If the software contains voice operated technologies, then operating this software
requires user attention. Diverting attention away from the road while driving can possibly cause
an accident or other serious consequence. Even occasional, short diversions of attention can be
dangerous if your attention is diverted away from your driving task at a critical time. Company
and Microsoft make no representations, warranties or other determinations that ANY use of this
software is legal, safe, or in any manner recommended or intended while driving or otherwise
operating a motor vehicle.

If you comply with these license terms, you have the rights below.

1. USE RIGHTS.
You may use the software on the device with which you acquired the software.

2. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS.
a.Specific Use. Company designed this device for a specific use. You may only use the

software for that use.

b.Included Microsoft Programs and Additional Required Licenses. Except as provided

below, these license terms apply to all Microsoft programs included with the software. If the
license terms with any of those programs give you other rights that do not expressly conflict
with these license terms, you also have those rights.

i. This agreement does not grant you any rights with respect to the Windows Mobile Device

Center, Microsoft ActiveSync or Microsoft Outlook 2007 Trial which are subject to the
licenses accompanying those items.

c.Speech Recognition. If the software includes speech recognition component(s), you

understand that speech recognition is an inherently statistical process and that recognition
errors are inherent in the process. Neither Company nor Microsoft or their suppliers shall be
liable for any damages arising out of errors in the speech recognition process.

d.Phone Functionality. If the device software includes phone functionality, all or certain

portions of the device software may be inoperable if you do not have and maintain a service
account with a wireless telecommunication carrier (“Mobile Operator”), or if the Mobile
Operator’s network is not operating or configured to operate with the device.

3. SCOPE OF LICENSE. The software is licensed, not sold. This agreement only gives you

some rights to use the software. Company and Microsoft reserve all other rights. Unless
applicable law gives you more rights despite this limitation, you may use the software only as
expressly permitted in this agreement. In doing so, you must comply with any technical
limitations in the software that allow you to use it only in certain ways. You may not:

• work around any technical limitations in the software;

• reverse engineer, decompile or disassemble the software;

• make more copies of the software than specified in this agreement;

• publish the software for others to copy;

• rent, lease or lend the software; or

• use the software for commercial software hosting services.

Except as expressly provided in this agreement, rights to access the software on this device do
not give you any right to implement Microsoft patents or other Microsoft intellectual property in
software or devices that access this device.

You may use remote access technologies in the software such as Remote Desktop Mobile to
access the software remotely from a computer or server. You are responsible for obtaining any
licenses required for use of the protocols to access other software.

4. INTERNET-BASED SERVICES. Microsoft provides Internet-based services with the

software. Microsoft may change or cancel them at any time.

a.Consent for Internet-Based Services. The software features described below connect to

Microsoft or service provider computer systems over the Internet. In some cases, you will
not receive a separate notice when they connect. You may switch off some of these features
or not use them. For more information about these features, visit http://go.microsoft.com/
fwlink/?LinkId=81931.

By using these features, you consent to the transmission of this information. Microsoft
does not use the information to identify or contact you.

Device Information. The following features use Internet protocols, which send to the
appropriate systems device information, such as your Internet protocol address, the type of
operating system, browser and name and version of the software you are using, and the
language code of the device where you installed the software. Microsoft uses this information
to make the Internet-based services available to you.

• Windows Mobile Update Feature. The Windows Mobile Update feature provides you the
ability to obtain and install software updates on your device if updates are available. You
may choose not to use this feature. Company and/or your Mobile Operator may not support
this feature or an update for your device.

• Windows Media Digital Rights Management. Content owners use Windows Media digital
rights management technology (WMDRM) to protect their intellectual property, including
copyrights. This software and third party software use WMDRM to play and copy WMDRM­protected content. If the software fails to protect the content, content owners may ask
Microsoft to revoke the software’s ability to use WMDRM to play or copy protected content.
Revocation does not affect other content. When you download licenses for protected
content, you agree that Microsoft may include a revocation list with the licenses. Content
owners may require you to upgrade WMDRM to access their content. Microsoft software
that includes WMDRM will ask for your consent prior to the upgrade. If you decline an
upgrade, you will not be able to access content that requires the upgrade.

b.Misuse of Internet-based Services. You may not use these services in any way that could

harm them or impair anyone else’s use of them. You may not use the services to try to gain
unauthorized access to any service, data, account or network by any means.

5. NOTICES ABOUT THE MPEG-4 VISUAL STANDARD. The software may include MPEG-4
visual decoding technology. This technology is a format for data compression of video
information. MPEG LA, L.L.C. requires this notice:

USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL
STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR
INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A
CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR
PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY
LICENSED BY MPEG LA, L.L.C.

If you have questions about the MPEG-4 visual standard, please contact MPEG LA, L.L.C.,
250 Steele Street, Suite 300, Denver, CO 80206; www.mpegla.com.

6. DIGITAL CERTIFICATES. The software uses digital certificates in X.509 format. These digital
certificates are used for authentication.

7. CONNECTIVITY SOFTWARE. Your device package may include Windows Mobile Device
Center or Microsoft ActiveSync software. If it is included, then you may install and use it in
accordance with the license terms that are provided with it. If no license terms are provided,
then you may install and use only one (1) copy of the software on a single computer.

8. NETWORK ACCESS. If you are using a network, such as an employer network, the network
administrator may limit features or functionality on your device.

9. PRODUCT SUPPORT. Contact Company for support options. Refer to the support number
provided with the device.

10. LINKS TO THIRD PARTY WEBSITES. If the software provides links to third party websites,
those links are provided to you only as a convenience, and the inclusion of any link does not
imply an endorsement of the third party website by Microsoft.

11. BACKUP COPY. You may make one backup copy of the software. You may use it only to
reinstall the software on the device.

12. PROOF OF LICENSE. If you acquired the software on the device, or on a disc or other
media, a genuine Certificate of Authenticity label with a genuine copy of the software identifies
licensed software. To be valid, this label must be affixed to the device, or included on or in
Company’s software packaging. If you receive the label separately, it is not valid. You should
keep the label on the device or packaging to prove that you are licensed to use the software. To
identify genuine Microsoft software, see http://www.howtotell.com.

13. TRANSFER TO A THIRD PARTY. You may transfer the software only with the device, the
Certificate of Authenticity label, and these license terms directly to a third party. Before the
transfer, that party must agree that these license terms apply to the transfer and use of the
software. You may not retain any copies of the software including the backup copy.

14. NOT FAULT TOLERANT. The software is not fault tolerant. Company installed the software
on the device and is responsible for how it operates on the device.

15. RESTRICTED USE. The Microsoft software was designed for systems that do not require
fail-safe performance. You may not use the Microsoft software in any device or system in which
a malfunction of the software would result in foreseeable risk of injury or death to any person.
This includes operation of nuclear facilities, aircraft navigation or communication systems and
air traffic control.

16. NO WARRANTIES FOR THE SOFTWARE. The software is provided “as is”. You bear all
risks of using it. Microsoft gives no express warranties, guarantees or conditions. Any warranties
you receive regarding the device or the software do not originate from, and are not binding on,
Microsoft or its affiliates. When allowed by your local laws, Company and Microsoft exclude
implied warranties of merchantability, fitness for a particular purpose and non-infringement.

17. LIABILITY LIMITATIONS. You can recover from Microsoft and its affiliates only direct
damages up to fifty U.S. Dollars (U.S. $50.00), or equivalent in local currency. You cannot
recover any other damages, including consequential, lost profits, special, indirect or incidental
damages.

This limitation applies to:

• anything related to the software, services, content (including code) on third party internet
sites, or third party programs, and

• claims for breach of contract, breach of warranty, guarantee or condition, strict liability,
negligence, or other tort to the extent permitted by applicable law.

It also applies even if Microsoft should have been aware of the possibility of the damages. The
above limitation may not apply to you because your country may not allow the exclusion or
limitation of incidental, consequential or other damages.

18. EXPORT RESTRICTIONS. The software is subject to United States export laws and
regulations. You must comply with all domestic and international export laws and regulations
that apply to the software. These laws include restrictions on destinations, end users and end
use. For additional information, see www.microsoft.com/exporting.

Software Support

Zebra wants to ensure that customers have the latest release of entitled software at the time of product
purchase.

To confirm that your Zebra device shipped with the latest release of entitled software, visit:
www.zebra.com/support. Check for the latest software from Software Downloads > Product Line/
Product > Go.

If your device does not have the latest entitled software release as of your product purchase date,
please e-mail a request to Zebra at: [e-mail].

You must include the following essential device information with your request:

• Model number

• Serial number

• Proof of purchase

• Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the latest software release, you will receive an
e-mail containing a link directing you to a Zebra Web site to download the appropriate software.

Marking and European Economic Area (EEA)

Waste Electrical and Electronic Equipment (WEEE)

Review Copy