Zebra Technologies ET55BE User Manual

ET5X

Enterprise Tablet

Quick Reference Guide

2 ET5X Enterprise Tablet

Zebra reserves the right to make changes to any product to improve reliability, function, or design.

Zebra does not assume any product liability arising out of, or in connection with, the application or use
of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right
or patent, covering or relating to any combination, system, apparatus, machine, material, method, or
process in which Zebra products might be used. An implied license exists only for equipment, circuits,
and subsystems contained in Zebra products.

Warranty

For the complete Zebra hardware product warranty statement, go to: http://www.zebra.com/warranty.

Service Information

If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If
there is a problem with the equipment, they will contact the Zebra Support at:
http:www.zebra.com/support.

For the latest version of this guide go to: http://www.zebra.com/support.

Software Support

Zebra wants to ensure that customers have the latest release of entitled software at the time of product
purchase.

To confirm that your Zebra device shipped with the latest release of entitled software, visit:
www.zebra.com/support. Check for the latest software from Software Downloads > Product
Line/Product > Go.

If your device does not have the latest entitled software release as of your product purchase date,
please e-mail a request to Zebra at: [e-mail].

You must include the following essential device information with your request:

• Model number

• Serial number

• Proof of purchase

• Title of the software download you are requesting.

If it is determined by Zebra that your device is entitled to the latest software release, you will receive an
e-mail containing a link directing you to a Zebra web site to download the appropriate software.

Quick Reference Guide 3

134

6

2 5

5

8” Version

10” Version

Introduction

The ET5X are Windows® and Android™ based tablets that come in 8” and 10” configurations.

• ET50: WLAN only

• ET55: WLAN and WWAN.

Features

Item Description

1 Ambient Light Sensor - Recognizes the ambient light and adjusts the display

brightness (if enabled).

2 Front Microphone.

3 Front Facing Camera - Use for video conferencing.

4 Camera Indicator LED - Lights red when the camera is activate. Momentarily lights red

when the device boots and shuts down.

5 Charging Indicator LED - Indicates charging status.

• OFF - device is not connected to charger.

• ORANGE - device is charging.

• GREEN - device is connected and fully charged.

• RED - charge error.

6 Windows Button - Press to launch the Windows Home screen (Windows Tablets only).

4 ET5X Enterprise Tablet

11108712

14

9

16

13

15

Item Description

7 Rear Camera - 8MP auto-focus camera for high resolution images and video.

8 Camera LED Flash - Provides illumination for the camera.

9 Rear Microphone - Use during video recordings.

10 Power Button - Push once to start the ET5X; push it again to enable sleep mode. Push and

hold it to shut down the ET5X.

11 Volume Key - Push the left side to reduce the volume. Press the right side to increase the

volume.

12 3.5 mm Audio Jack - Use to connect to headset with microphone.

13 MicroSD Card Slot - Provides storage for microSD Card (up to 2 TB).

14 Micro USB Interface (charging only) - Provides for charging the ET5X using USB cable and

15 USB 2.0 Port - Provides input for USB devices.

16 Back Cover - Covers the service replaceable battery.

power supply. On Android devices, provides communication with host computer.

Quick Reference Guide 5

18

19

18

17

8” Version

18

10” Version

Item Description

17 NFC Antenna Position - Use to read NFC cards and RFID tags.

18 Stereo Speakers - Provides audio playback.

19 Docking Connector - Interfaces with the cradle.

Installing a micro SIM Card (ET55 Only)

To install a micro SIM card:

1. Press the Power button to turn off the ET55.

2. Lift the notched corner of the battery cover.

3. Carefully lift the battery cover off the ET55.

4. On the 8” version, push the two locking tabs up, then pull up on the tab to remove battery.

On the 10” version, push the two locking tabs up (1), then, using index fingers, lift the battery up (2).

6 ET5X Enterprise Tablet

Pull Tab

8” Version

Locking Tabs

2.LIFT
UP

2.LI
FT

U

P

1.RELEASE LOCKING

1

.

R

ELEASE

L

OC

KING

10” Version

Locking Tabs

8” Version 10” Version

5. Insert the micro SIM card with contacts facing down.

CAUTION

Do not use nano to micro SIM card adapters. Only use micro SIM cards.

6. Push the micro SIM card in and ensure that it locks into place.

7. Replace the battery.

Quick Reference Guide 7

On the 10” version, ensure that the two battery latches engage.

CAUTION

properly may damage the battery cover.

8. Align the tabs on the underside of the cover with the slot around the battery well. Make sure that the

notch on the battery cover is at the bottom left cover of the ET5X.

9. Carefully press down around the edge of the cover. Make sure that the cover is seated properly.

Be aware of the orientation of the battery cover. Failure to replace the battery cover

10.Press Power button to turn on the ET55.

Install a micro SD Card

To install a microSD card:

8 ET5X Enterprise Tablet

Communication CradleCharge Only Cradle

Short Insert

Rugged Communication Cradle

Ta l l I n se r t

1. Open access door.

2. Insert microSD card into slot with contacts facing down.

3. Press the card in to ensure that it is seated properly.

4. Close access door.

Charging the ET5X

Use the Communication and Charging Cradle, Rugged Communication and Charging Cradle or
Charge Only Cradle to charge the ET5X.

NOTE

The Charge Only Cradle (CRD-ET5X-1SCG1) and the Communication and Charge
Cradle (CRD-ET5X-1SCOM1) come with two inserts; tall insert and short insert. Install the
tall insert when using an ET5X without a Rugged Frame and Expansion Back. Install the
small insert when using an ET5X with an Expansion Back and without a Rugged Frame. Do
not install either insert when using the ET5X with the Rugged Frame.

The Rugged Communication and Charge Cradle (CRD-ET5X-1SCOM1R) does not come
with inserts. Use with ET5X and Rugged Frame with IO Adapter.

Setup the Charge Only Cradle or Communication Cradle, power supply, PWRS-14000-148R and
3-wire country specific AC Line Cord, sold separately.