Zebra Technologies DS8178 User Manual

DS8178 DIGITAL SCANNER

DIGITAL SCANNER FEATURES

CRADLE INSERTION

http://www.zebra.com/DS8178

Digital Scanner

Quick Start Guide

Note: Standard range digital scanner pictured.

1

2

5

1

Scan Window

2

Battery LED

3

Scan LEDs

4 Beeper
5 Scan Trigger

3

BATTERY INSERTION/REMOVAL

Note: It is recommended to fully charge the battery before use.

4

1 2 3

Unlock

4

Lock

POST IN WORK AREAPOST IN WORK AREA

Host Port

Host Port

See Product Reference Guide
for detailed information

SET DEFAULTS / ENTER KEY BAR CODESCRADLE CABLE CONNECTION

RETURN TO FACTORY DEFAULTS

ADD AN ENTER KEY
(Carriage Return/Line Feed)

To add an Enter key after scanned data, scan
the bar code below.

ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)

NIGHT MODE WITH VIBRATE

Note: Healthcare configurations only.

TAB KEY BAR CODE

ADD A TAB KEY

To add a Tab key after scanned data, scan
the bar code below.

ADD A TAB KEY

USB CAPS LOCK OVERRIDE BAR CODE

STEP 1 - CONNECT HOST INTERFACE

USB

ENABLE NIGHT MODE TRIGGER

DISABLE NIGHT MODE TRIGGER

TOGGLE NIGHT MODE

STEP 2 - SET UP INTERFACE (Scan Host Bar Codes)

USB
Scan

The interface cable automatically detects the host interface type and uses the
default setting. If the default (*) does not meet your requirements, scan another
host bar code below.

ONE of the bar codes below

USB - OVERRIDE CAPS LOCK KEY (ENABLE)

*USB - DO NOT OVERRIDE CAPS LOCK KEY (DISABLE)

NOTE: Cables may vary
depending on configuration

RS-232

*USB KEYBOARD (HID)

IBM OPOS (IBM HAND-HELD USB
with FULL SCAN DISABLE)

RS-232

Scan

The interface cable automatically detects the host interface type and uses the
default setting. If the default (*) does not meet your requirements, scan another
host bar code below.

ONE of the bar codes below

IBM HAND-HELD USB

SNAPI WITH IMAGING

KEYBOARD WEDGE

*STANDARD RS-232

ICL RS-232

NIXDORF RS-232 MODE A

Keyboard Wedge

Scan a bar code below

The Auto-Host Detect Cable feature automatically detects the host interface type
and uses the default setting. If the default (*) does not meet your requirements,
scan the IBM PC/AT and IBM PC COMPATIBLE bar code below.

NIXDORF RS-232 MODE B

FUJITSU RS-232

OPOS/JPOS

IBM 46XX

IBM PC/AT and IBM PC COMPATIBLE*IBM AT NOTEBOOK

IBM 46XX

Scan ONE of the bar codes below

The Auto-Host Detect Cable feature automatically detects the host interface type,
but there is no default setting. Scan one of the bar codes below to select the
appropriate port.

NON-IBM SCANNER EMULATION (PORT 5B) TABLE-TOP SCANNER EMULATION (PORT 17)

ABOUT 123Scan

123Scan is an easy-to-use, PC-based software tool
that enables rapid and easy customized setup of
a scanner via a bar code or USB cable.
For more information, visit: http://www.zebra.com/123Scan.

HAND-HELD SCANNER EMULATION (PORT 9B)

123Scan

UTILITY FUNCTIONALITY

- Device configuration

- Electronic programming (USB cable)

- Programming bar code(s)

- Data view – scan log (display scanned bar code data)

- Access asset tracking information

- Upgrade firmware and view release notes

- Remote management (SMS package generation)

Дане обладнання

відповідає вимогам технічного регламенту№1057, № 2008 на обмеження що

до

використання деяких небезпечних речовин в електричних та електронних пристроях.

Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiacion es electromagnéticas.

通

DS8178 DIGITAL SCANNER

SCANNING

Aiming

POST IN

WORK AREA

Avoid Extreme Wrist Angles Avoid ReachingAvoid Bending

012345 012345

RECOMMENDED USAGE GUIDE - OPTIMUM BODY POSTURE

Health and Safety Recommendation

Ergonomic Recommendations

Caution: In order to avoid or minimize the potential risk of ergonomic injury
follow the recommendations below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your company's safety programs
to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Reduce or eliminate vibration

• Perform tasks at correct heights

• Keep objects that are used frequently within easy reach

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

AVOID EXTREME

WRIST ANGLES

AVOID BENDING

AVOID REACHING

BEEPER INDICATIONS LED INDICATIONS

Indication Beeper Sequence

Hand-Held Scanning

Power up Low/medium/high beeps

Medium beepBar code decoded

Transmission error detected; data is ignored

Successful parameter setting

Correct programming sequence performed

Incorrect programming sequence, or Cancel

bar code scanned

4 long low beeps

High/low/high/low beeps

High/low beeps

Long low/long high beeps

Low battery indication (on trigger release) 4 short high beeps

Battery Indications

Battery LED status 51-100% Green, 21-50% Amber, 0-20% Red

Battery end of life 51-100% Green/red alternating
21-50% Amber/red alternating
0-20% Red blinking

Paging state Blue (fast, fast slow)

Transmission error

No power to scanner

Digital scanner is ready to scan

Bar code is successfully decoded

Transmission error

TROUBLESHOOTING

Indication LED Indicator

OffDigital scanner is on and ready to scan, or no power to scanner

Green flashBar code is successfully decoded

Red

Hands-Free (Presentation) Scanning

Off

Green

Off Momentarily

Red

Local Contact:

Digital scanner not working

No power to scanner

Digital scanner is disabled

Digital scanner decoding bar code, but data not transmitting to host

Host interface not configured properly

Interface cable is loose

Invalid ADF Rule Program the correct ADF rules.

Digital scanner not paired to cradle Scan cradle pairing bar code.

Check system power; ensure battery is charged.

Ensure that correct host interface cable is used.

Scan appropriate host parameter bar codes.

Ensure all cable connections are secure.

REGULATORY INFORMATION

©

2016 Zebra Technologies, Inc.

Zebra reserves the right to make changes to any product to improve reliability, function, or design.
Zebra does not assume any product liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein. No license is granted, either expressly or by implication,
estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which Zebra products might be used. An implied license
exists only for equipment, circuits, and subsystems contained in Zebra products.

Warranty

For the complete Zebra hardware product warranty statement, go to: http://www.zebra.com/warranty.

For Australia Only.

This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, #05-02/03,
Singapore 068895, Singapore. Our goods come with guarantees that cannot be excluded under the
Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Zebra Technologies Corporation Australia’s limited warranty above is in addition to any rights and
remedies you may have under the Australian Consumer Law. If you have any queries, please call Zebra
Technologies Corporation at+65 6858 0722. You may also visit our website: http://www.zebra.com for the
most updated warranty terms.

Service Information

If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a
problem with the equipment, they will contact the Zebra Global Customer Support Center at:
http://www.zebra.com/support. For the latest version of this guide go to: http://www.zebra.com/support.

Waste Electrical and Electronic Equipment (WEEE)

English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling.
For information on how to return product, please go to: http://www.zebra.com/weee.

Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се
връщат на Zebra за рециклиране. За информация относно връщането на продукти, моля отидете
на адрес: http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti
Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce:

http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs
oplysningerne om returnering af produkter på: http://www.zebra.com/ weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie
unter http://www.zebra.com/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να
επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή
ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο.

Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil
Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi:
http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final de
su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto,
visite: http://www.zebra.com/weee.
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés
à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez :
http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono
essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web: http://www.zebra.com /weee.

Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra
otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet:

http://www.zebra.com/weee.

Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į
kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni
újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el

a http://www.zebra.com/weee weboldalra.

Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu
rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.zebra.com/weee.

Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra
te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie
over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy
Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej
http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para
reciclagem. Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee.

Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie
returnate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi:

http://www.zebra.com/weee.

Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:

http://www.zebra.com/weee.

Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za
reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.

Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi
Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för
återvinning. Information om hur du returnerar produkten finns på http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade
edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.zebra.com/weee.

TURKISH WEEE Statement of Compliance

EEE Yönetmeliğ ine Uygundur

China RoHS

This table was created to comply with China RoHS requirements.

有害物质

汞 镉

铅

金属部件

(Metal Parts)

电路模块

(Circuit Modules)

电缆及电缆组件

(Cables and Cable Assemblies)

塑料和聚合物部件

(Plastic and Polymeric Parts)

光学和光学组件

(Optics and Optical Components)

电池

(Batteries)

本表格依据SJ/T 11364 的规定编制。

O: 表示该有害物质在该部件所有均质材料中的含量均在 SJ/T 11364--2014 规定的限量

X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11364--2014 规定

This table was created to comply with China RoHS requirements.

(Parts)

要求以下。

的限量要求。(企业可在此处，根据实际情况对上表中打“×”的技术原因进
行进一步说明。）

(Pb) (Hg)

X O O O O O

X

O

X

O

(Cd)

O

O O O O

O O O

O O O O OO

O O

O

O

O

多溴联苯

(Cr (VI))

(PBB) (PBDE)

O O

O O

O O O

Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com

Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many
juristictions worldwide. All other trademarks are the property of their respective owners.

© 2016 Symbol Technologies Corporation, a subsidiary of
Zebra Technologies Corporation.
All rights reserved.

•

15

多溴二苯醚部件名称

Regulatory Information

For devices with Symbol, or Symbol Technologies Inc., etc. on Manufacturing Label and for
devices manufactured at Reynosa, or any other Zebra factory facilities:

This device is approved under Zebra Technologies Corporation.

This guide applies to Model Number: DS8178. All Zebra devices are designed to be compliant
with rules and regulations in locations they are sold and will be labeled as required.

Local language translations are available at the following website:

Any changes or modifications to Zebra equipment, not expressly approved by
Zebra, could void the user’s authority to operate the equipment.

Bluetooth

This is an approved Bluetooth
visit https://www.bluetooth.org/tpg/listings.cfm.

Wireless Device Country Approvals

Note: this section is only applicable to WW/WR/EU configurations.

Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved

for use in the following countries: United States, Canada, Japan, China, South Korea, Australia, and Europe.

Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at

http://www.zebra.com/doc.

Note: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

Warnings for Use of Wireless Devices

Safety in Hospitals

Wireless devices transmit radio frequency energy and may affect medical electrical equipment.
Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or health care
facilities. These requests are designed to prevent possible interference with sensitive medical equipmet.

Pacemakers

Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld

wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are
consistent with independent research and recommendations by Wireless Technology Research.

Persons with Pacemakers:

• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.

• Should not carry the device in a breast pocket.

• Should use the ear furthest from the pacemaker to minimize the potential for interference

• If you have any reason to suspect that interference is taking place, turn OFF your device.

Other Medical Devices

Please consult your physician or the manufacturer of the medical device, to determine if the operation of your
wireless product may interfere with the medical device.

Safety Information

• Reducing RF Exposure – Use Properly
Only operate the device in accordance with the instructions supplied.

• International
The device complies with internationally recognized standards covering human exposure to electromagnetic

fields from radio devices. For information on “International” human exposure to eletromagnetic fields refer to
the Zebra Declaration of Conformity (DoC) at http://www.zebra.com/doc.

For further information on the safety of RF energy from wireless devices, see
http://responsibility.zebra.com/index.php/downloads/, which is located under Wireless Communications
and Health.

• Europe - Handheld Devices

To comply with EU RF exposure requirements, this device must be operated in the hand with a minimum
separation distance of 0 cm or more from a person’s body. Other operating configurations should be avoided.

• US and Canada

• Co-located Statement
To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be
co-located or operating in conjunction with any other transmitter/antenna except those already approve in this filling.

• Handheld Devices
This device was tested for typical body worn or handheld operation. Use only Zebra tested and approved belt-clips,
holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt clips, holsters, and similar
accessories may not comply with FCC RF exposure compliance requirements, and should be avoided.

LED Devices

For LED devices which have been evaluated to IEC 62471 and comply with the Exempt Risk Group,
no product labeling requirements apply. However, the following statement is required to comply with US and
international regulations:

LED Compliance Statement:

Classified as ‘EXEMPT RISK GROUP’ according to IEC 62471:2006 and EN 62471:2008.
Pulse duration: Continuous mS.

Batteries

Taiwan - Recycling

EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with

Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales,

giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery dispos

Battery Information

Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use

with the following battery models: Part Number 82-176890-01 (3.6 Vdc, 3200 mAh).

Zebra approved rechargeable battery packs are designed and constructed to the highest standards within
the industry.

However, there are limitations to how long a battery can operate or be stored before needing replacement.
Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental
conditions and severe drops.

When batteries are stored over six months, some irreversible deterioration in overall battery quality may
occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss
of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer,
the charge level should be verified at least once a year and charged to half of full charge. Replace the
battery when a significant loss of run time is detected.

Standard warranty period for all Zebra batteries is 30 days, regardless if the battery was purchased
separately or included as part of the mobile computer or bar code scanne
Zebra batteries, please visit: http://www.zebra.com/batterybasics.

Digital scanner not decoding bar code

Digital scanner not programmed for
bar code type

Bar code unreadable

Distance between scanner and bar
code incorrect

Scanned data incorrectly displayed on host

Host interface not configured properly

Region improperly configured Select appropriate country and language encoding scheme.

http://www.zebra.com/support.

Caution:

Only use Zebra approved and UL listed accessories, battery packs, and battery chargers.
Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be
dry before connecting to an external power source.

Declared maximum operating temperature:

®

Wireless Technology

Caution:

Caution:

®

product. For more information or to view the End Product Listing,

Operation of the device without regulatory approval is illegal.

Please observe all warning notices with regard to the usage of wireless devices.

RF Exposure Guidelines

Caution:

with a minimum separation distance of 0 cm or more from a person’s body.

Pour satisfaire aux exigences Américaines et Canadiennes d'exposition aux radio fréquences, un
dispositif de transmission doit fonctionner avec une distance de séparation minimale de 0 cm ou plus

de corps d'une personne.

Caution:

according to instructions.

To satisfy US and Canadian RF exposure requirements, a transmitting device must operate

Risk of expolosion if battery is replaced by an incorrect type. Dispose of batteries

50ºC

al.

r. For more information on

Ensure scanner is programmed to read
type of bar code being scanned.

Ensure bar code is not defaced; try scanning
test bar code of same bar code type.

Move scanner closer to, or further from
bar code.

Scan appropriate host parameter bar codes.

Radio Frequency Interference Requirements -FCC

Tested to comply
with FCC Standards

FOR HOME OR OFFICE USE

radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause

undesired operation.

Radio Frequency Interference Requirements - Canada

CAN ICES-3 (B)/NMB-3(B)

Radio Transmitters

This device complies with industry Canada’s license-exempt RSSs. Operation is subject to the following
two conditions:

(1) this device may not cause harmful interference and
(2) this device must accept any interference, including interference that may cause undesired operation

of the device.
Cet appareil est conforme exempts de licence le flux RSS de Industrie Canada. Son fonctionnement est
soumis aux deux conditions suivantes:

(1) le dispositif ne peut causer des interferences; et
(2) cet appareil doit accepter tout interference, y compris les interferences qui peuvent causer un mauvais

fonctionnement de l’appareil.

Marking and European Economic Area (EEA)

®

Bluetooth

•

Wireless Technology for use through the EEA has the following restrictions:

Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400-2.4835 GHz.

Statement of Compliance

Zebra hereby declares that this device is in compliance with all the essential requirements and other
relevant provisions of Directive 1999/5/EC and 2011/65/EU.
obtained from http://www.zebra.com/doc.

Other Countries

Japan (VCCI) - Voluntary Control Council for Interference

Class B ITE

Korea Warning Statement for Class B ITE

Brazil (UNWANTED EMISSIONS - ALL PRODUCTS)

Regulatory declarations for DS8178 - BRAZIL
For more information consult the website www.anatel.gov.br
NOTA: A marca de certificação se aplica ao Equip. de Radiação Restrita, modelo DS8178.

Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência

prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando
em caráter primário.” Para maiores consultas sobre ANATEL consulte o site: www.anatel.gov.br.

Chile

China

过访问以下网址可下载当地语言支持的产品说明书

http://www.motorolasolutions.com/CN-ZH/Pages/Contact_Us#support_tab

Ukraine

Taiwan

臺灣

低功率電波輻射性電機管理辦法

第十二條

經型式認證合格之低功率射頻電機，非經許可，公司、

商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

第十四條

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，

應立即停用，並改善至無干擾時方得繼續使用。

前項合法通信，指依電信規定作業之無線電通信。

低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

S. Korea

For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following expression should
be displayed:

당해무선설비는운용중전파혼신가능성이있음

당해무선설비는전파혼신가능성이있으므로인명안전과관련된서비스는할수없습니다.

Thailand

Battery Safety Guidelines

The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular

care should be taken where the device is charged in a non commercial environment.

• Follow battery usage, storage, and charging guidelines found in the user's guide.

• Improper battery use may result in a fire, explosion, or other hazard.

• To charge the mobile device battery, the battery and charger temperatures must be between +32ºF and +104ºF

(0ºC and +40ºC).

• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger,
contact Zebra support.

• For devices that utilize a USB port as a charging source, the device shall only be connected to products that
bear the USB-IF logo or have completed the USB-IF compliance program.

• Do not disassemble or open, crush, bend or deform, puncture, or shred.

• Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.

• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.

• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water
or other liquids, or expose to fire, explosion, or other hazard.

• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle
or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.

• Battery usage by children should be supervised.

• Please follow local regulations to promptly dispose of used re-chargeable batteries.

• Do not dispose of batteries in fire.

• Seek medical advice immediately if a battery has been swallowed.

• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been
made, wash the affected area with large amounts of water and seek medical advice.

• If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection.

Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.This equipment generates, uses and can radiate

A Declaration of Conformity may be

B

MN-002753-01 Revision A July 2016

DS8178 DIGITAL SCANNER