Zebra TC8000 Touch Computer TC8000 Regulatory Guide (en)

TC8000

1

3

2

Touch Computer

Regulatory Guide

We reserves the right to make changes to any product to improve
reliability, function, or design. We do not assume any product liability
arising out of, or in connection with, the application or use of any product,
circuit, or application described herein. No license is granted, either
expressly or by implication, estoppel, or otherwise under any patent right
or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which our products might be
used. An implied license exists only for equipment, circuits, and
subsystems contained in the products.

Warranty

For the complete hardware product warranty statement, go to:
http://www.zebra.com/warranty.

Service Information

If you have a problem using the equipment, contact your facility’s
Technical or Systems Support. If there is a problem with the equipment,
they will contact the Global Support Center at:
http://www.zebra.com/support.

For the latest version of this guide go to: http://www.zebra.com/support.

Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL 60069, U.S.A.
http://www.zebra.com

ZEBRA and the stylized Zebra head are trademarks of Zebra
Technologies Corporation, registered in many jurisdictions worldwide.
All other trademarks are the property of their respective owners. ©2019
Zebra Technologies Corporation and/or its affiliates. All rights reserved.

MN002270A06 Rev. A — September 2019

Introduction

For detail information on using the TC8000, download the TC8000 User
Guide. Go to the Zebra Support site: http://www.zebra.com/support.

Regulatory Information

This device is approved under Zebra Technologies Corporation.
This guide applies to Model Number TC80N0 and TC80NH.
All Zebra devices are designed to be compliant with the rules and
regulations in the locations they are sold and will be labeled as required.
Local language translations are available at the following website:
www.zebra.com/support.
Any changes or modifications to Zebra equipment not expressly
approved by Zebra could void the user's authority to operate the
equipment.
For use only with Zebra approved and UL Listed mobile computers,
Zebra approved, and UL Listed/Recognized battery packs.

CAUTION Only use Zebra approved and UL Listed accessories,

Declared maximum operating temperature: 50°C.

battery packs, and battery chargers.
Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must be dry
before connecting to an external power source.

Bluetooth® Wireless Technology

This is an approved Bluetooth® product. For more information or to view
the End Product Listing, please visit https://www.bluetooth.org/tpg/
listings.cfm.

Wireless Device Country Approvals

Note: This section is only applicable to WW/WR/EU configurations.

Regulatory markings subject to certification are applied to the device
signifying the radio(s) is/are approved for use in the following countries
and continents: United States, Canada, Japan, China, South Korea,
Australia, and Europe.
Please refer to the Declaration of Conformity (DoC) for details of other
country markings. This is available at: http://www.zebra.com/doc.
Note: Europe includes Austria, Belgium, Bulgaria, Croatia, Czech
Republic, Cyprus, Denmark, Estonia, Finland, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and the United
Kingdom.

CAUTION Operation of the device without regulatory approval

Country Roaming

This device incorporates the International Roaming feature
(IEEE802.11d), which will ensure the product operates on the correct
channels for the particular country of use.

Frequency of Operation – IC

5 GHz Only:

The use in the UNII (Unlicensed National Information Infrastructure)
band 1 (5150-5250 MHz) is restricted to Indoor Use Only; any other use
will make the operation of this device illegal.
Industry Canada Statement:

CAUTION The device for the band 5150-5250 MHz is only for

CAUTION Le dispositive fonctionnant dans la bande 5150-5250

2.4 GHz Only

The available channels for 802.11 b/g operation in the US are Channels
1 to 11. The range of channels is limited by firmware.

is illegal.

indoor usage to reduce potential for harmful
interference to co-Channel mobile satellite systems.
High power radars are allocated as primary users
(meaning they have priority) of 5250-5350 MHz and
5650-5850 MHz and these radars could cause
interference and/or damage to LE-LAN devices

MHz est réservé uniquement pour une utilisation à
l'intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles
utilisant les mêmes canaux. Les utilisateurs de radars
de haute puissance sont désignés utilisateurs
principaux (c.-à-d., qu'ils ont la priorité) pour les
bands 5250-5350 MHz et 5650-5850 MHz et que ces
radars pourraient causer du brouillage et/ou des
dommages aux dispositifs LAN-EL..

Health and Safety

Ergonomic Recommendations

CAUTION In order to avoid or minimize the potential risk of

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures

Note: The following section is only applicable for mobile computers.

Vehicle Installation

RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (including safety systems). Check
with the manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer about any equipment that has been
added to your vehicle.
An air bag inflates with great force. DO NOT place objects, including
either installed or portable wireless equipment, in the area over the air
bag or in the air bag deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious injury could result.
Position the device within easy reach. Be able to access the device
without removing your eyes from the road.
Note: Connection to an alert device that will cause a vehicle horn to
sound or lights to flash on receipt of a call on public roads is not
permitted.
IMPORTANT: Before installing or using, check state and local laws
regarding windshield mounting and use of equipment.

For Safe Installation

• Do not put your phone in a location that obstructs the drivers vision or
interferes with the operation of the Vehicle.

• Do not cover an airbag.

Safety on the Road

Do not take notes or use the device while driving. Jotting down a 'to do'
list or flipping through your address book takes attention away from your
primary responsibility; driving safely.
When driving a car, driving is your first responsibility - Give your full
attention to driving. Check the laws and regulations on the use of
wireless devices in the areas where you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice good
common sense and remember the following tips:

1. Get to know your wireless device and any features such as speed
dial and redial. If available, these features help you to place your call
without taking your attention off the road.

2. When available, use a hands free device.

3. Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, ice, and even heavy traffic can be
hazardous.

4. Dial sensibly and assess the traffic; if possible, place calls when you
are not moving or before pulling into traffic. Try to plan calls when
your car will be stationary. If you need to make a call while moving,
dial only a few numbers, check the road and your mirrors, then
continue.

5. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving
and suspend conversations that have the potential to divert your
attention from the road.

6. Use your wireless phone to call for help. Dial the Emergency
services, (9-1-1 in the US, and 1-1-2 in Europe) or other local
emergency number in the case of fire, traffic accident, or medical
emergencies. Remember, it is a free call on your wireless phone! The
call can be made regardless of any security codes and depending on
a network; with or without a SIM card inserted.

7. Use your wireless phone to help others in emergencies. If you see an
auto accident, crime in progress, or other serious emergency where
lives are in danger, call the Emergency Services (9-1-1 in the US,
and 1-1-2 in Europe) or other local emergency number as you would
want others to do for you.

8. Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a vehicle you know
to be stolen, call roadside assistance or other special non-emergency
wireless number.

ergonomic injury, follow the recommendations below.
Consult with your local Health and Safety Manager to
ensure that you are adhering to your company's
safety programs to prevent employee injury.

“The wireless industry reminds you to use your device / phone safely
when driving.”

Warnings for Use of Wireless Devices

CAUTION Please observe all warning notices with regard to the

usage of wireless devices.

Potentially Hazardous Atmospheres - Vehicles Use

You are reminded of the need to observe restrictions on the use of radio
devices in fuel depots, chemical plants, etc. and areas where the air
contains chemicals or particles such as grain, dust, or metal powders
and any other area where you would normally be advised to turn off your
vehicle engine.

Safety in Aircraft

Switch off your wireless device whenever you are instructed to do so by
airport or airline staff. If your device offers a 'flight mode' or similar
feature, consult airline staff as to its use in flight.

Safety in Hospitals

Wireless devices transmit radio frequency energy and may affect
medical electrical equipment.
Wireless devices should be switched off wherever you are requested to
do so in hospitals, clinics, or healthcare facilities. These requests are
designed to prevent possible interference with sensitive medical
equipment.

Pacemakers

Pacemaker manufacturers recommended that a minimum of 15 cm
(6 inches) be maintained between a handheld wireless device and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with independent research and
recommendations by Wireless Technology Research.

Persons with Pacemakers:

• Should ALWAYS keep the device more than 15 cm (6 inches) from
their pacemaker when turned ON.

• Should not carry the device in a breast pocket.

• Should use the ear furthest from the pacemaker to minimize the
potential for interference.

• If you have any reason to suspect that interference is taking place,
turn OFF your device.

Other Medical Devices

Please consult your physician or the manufacturer of the medical device
to determine if the operation of your wireless product may interfere with
the medical device.

RF Exposure Guidelines

Safety Information

• Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.

• International: The device complies with internationally recognized
standards covering human exposure to electromagnetic fields from
radio devices. For information on 'International' human exposure to
electromagnet fields, refer to the Zebra Declaration of Conformity
(DoC) at: http://www.zebra.com/doc.
For further information on the safety of RF energy from wireless
devices, see http://responsibility.zebra.com/index.php/downloads/,
which is located under Wireless Communications and Health.

• Europe: Hand-Held Devices
This device was tested for typical body worn operation. Use only
Zebra tested and approved belt clips, holsters, and similar
accessories to ensure EU Compliance.

U.S. and Canada: Co-located statement

To comply with FCC RF exposure compliance requirement, the
antenna used for this transmitter must not be co-located or operating
in conjunction with any other transmitter/antenna except those
already approved in this filling.
Hand-Held Devices: This device was tested for typical body worn
operation. Use only Zebra tested and approved belt-clips, holsters,
and similar accessories to ensure FCC Compliance. The use of third­party belt clips, holsters, and similar accessories may not comply with
FCC RF exposure compliance requirements, and should be avoided.

To satisfy US and Canadian RF exposure requirements, a transmitting
device must operate with a minimum separation distance of 18 mm or
more from a person's body.
Pour satisfaire aux exigences Américaines et Canadiennes d'exposition
aux radio fréquences, un dispositif de transmission doit fonctionner avec
une distance de séparation minimale de 18 mm ou plus de corps d'une
personne.

Laser Devices

Class 2 laser scanners use a low power, visible light diode. As with any
very bright light source such as the sun, the user should avoid staring
directly into the light beam. Momentary exposure to a Class 2 laser is not
known to be harmful.
The following statement is required to comply with US and international
regulations.

CAUTION Use of controls, adjustments, or the performance of

procedures other than those specified herein may
result in hazardous laser light exposure.

Labels Reads

1. LASER LIGHT - DO NOT STARE INTO BEAM CLASS 2 LASER
PRODUCT.

2. CAUTION - CLASS 2 LASER LIGHT WHEN OPEN. DO NOT STARE
INTO THE BEAM.

3. COMPLIES WITH 21CFR1040.10 & 1040.11 EXCEPT FOR
DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED
JUNE 24, 2007 AND IEC/EN 60825-1:2007 AND/OR IEC/EN 60825­1:2014.

LED Devices

For LED devices which have been evaluated to IEC 62471 and comply
with the Exempt Risk Group, no product labeling requirements apply.
However, the following statement is required to comply with US and
international regulations:
LED Compliance Statement:
Classified as 'EXEMPT RISK GROUP' according to IEC 62471:2006 and
EN 62471:2008.
Pulse duration: SE4750:1.7 ms

Batteries

Taiwan - Recycling

EPA (Environmental Protection Administration)
requires dry battery producing or importing firms
in accordance with Article 15 of the Waste
Disposal Act are required to indicate the recycling

promotion. Contact a qualified Taiwanese recycler for proper battery
disposal.

Battery Information

CAUTION Risk of explosion if battery is replaced by an

Use only Zebra approved batteries. Accessories which have battery
charging capability are approved for use with the following battery
models:

• 82-176054-01 (4.2 VDC, 6700 mAh).

-000380 (4.2 VDC, 7000 mAh).

•BT

Zebra approved rechargeable battery packs are designed and
constructed to the highest standards within the industry.
However, there are limitations to how long a battery can operate or be
stored before needing replacement. Many factors affect the actual life
cycle of a battery pack, such as heat, cold, harsh environmental
conditions and severe drops.
When batteries are stored over six (6) months, some irreversible
deterioration in overall battery quality may occur. Store batteries at half of
full charge in a dry, cool place, removed from the equipment to prevent
loss of capacity, rusting of metallic parts and electrolyte leakage. When
storing batteries for one year or longer, the charge level should be
verified at least once a year and charged to half of full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Zebra batteries is one year, regardless if
the battery was purchased separately or included as part of the mobile
computer. For more information on Zebra batteries, please visit:
www.zebra.com/batterybasics.

marks on the batteries used in sales, giveaway or

incorrect type. Dispose of batteries according to
instructions.

Battery Safety Guidelines

• The area in which the units are charged should be clear of debris
and combustible materials or chemicals. Particular care should
be taken where the device is charged in a non commercial
environment.

• Follow battery usage, storage, and charging guidelines found in
the User Guide.

• Improper battery use may result in a fire, explosion, or other
hazard.

• To charge the mobile device battery, the battery and charger
temperatures must be between +32 ºF and +104 ºF (0 ºC and
+40 ºC).

• Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any questions
about the compatibility of a battery or a charger, contact Zebra
Support.

• For devices that utilize a USB port as a charging source, the
device shall only be connected to products that bear the USB-IF
logo or have completed the USB-IF compliance program.

• Do not disassemble or open, crush, bend or deform, puncture, or
shred.

• Severe impact from dropping any battery-operated device on a
hard surface could cause the battery to overheat.

• Do not short circuit a battery or allow metallic or conductive
objects to contact the battery terminals.

• Do not modify or remanufacture, attempt to insert foreign objects
into the battery, immerse or expose to water or other liquids, or
expose to fire, explosion, or other hazard.

• Do not leave or store the equipment in or near areas that might
get very hot, such as in a parked vehicle or near a radiator or
other heat source. Do not place battery into a microwave oven or
dryer.

• Battery usage by children should be supervised.

• Please follow local regulations to promptly dispose of used re­chargeable batteries.

• Do not dispose of batteries in fire.

• Seek medical advice immediately if a battery has been
swallowed.

• In the event of a battery leak, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash
the affected area with large amounts of water and seek medical
advice.

• If you suspect damage to your equipment or battery, contact
Global Customer Support to arrange for inspection.

Radio Frequency Interference
Requirements-FCC

comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of 5 GHz WLAN, for use in the U.S., has the following
restriction:

• Notched Band 5.60 - 5.65 GHz

Note: This equipment has been tested and found to

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received
including interference that may cause undesired operation.

Radio Frequency Interference Requirements –
Canada

CAN ICES-3 (B)/NMB-3(B)

Radio Transmitters

For RLAN Devices:
The use of 5 GHz RLANs, for use in Canada, have the following
restrictions:

• Restricted Band 5.60 - 5.65 GHz
This device is in compliance with the NRC for Industry Canada
applicable to license-exempt radios. Use is allowed with the following
two conditions: (1) the device must not produce interference, and (2) the
device must accept any interference to the radio even if the interference
is likely to compromise operation.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radio électrique subi même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Label Marking: The Term 'IC:' before the radio certification only signifies
that Industry Canada technical specifications were met.

Marking and European Economic Area
(EEA)

The use of 5GHz RLAN throughout the EEA, have the following
restriction:

• 5.15 - 5.35 GHz is restricted to indoor use only

Statement of Compliance

Zebra hereby declares that this radio equipment is in compliance with
Directive 2011/65/EU and 1999/5/EC or 2014/53/EU (2014/53/EU
supersedes 1999/5/EC from 13th June 2017). The full text of the EU
Declaration of Conformity is available at the following internet address:
http://www.zebra.com/doc.

Waste Electrical and Electronic
Equipment (WEEE)

English: For EU Customers: All products at the end of their life

must be returned to Symbol for recycling. For information on how to
return product, please go to: http://www.zebra.com/weee.

Français: Clients de l'Union Européenne : Tous les produits en fin
de cycle de vie doivent être retournés à Symbol pour recyclage.
Pour de plus amples informations sur le retour de produits,
consultez : http://www.zebra.com/weee.

Español: Para clientes en la Unión Europea: todos los productos
deberán entregarse a Symbol al final de su ciclo de vida para que
sean reciclados. Si desea más información sobre cómo devolver un
producto, visite: http://www.zebra.com/weee.

Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am
Ende ihrer Lebensdauer zum Recycling an Symbol zurückgesandt
werden. Informationen zur Rücksendung von Produkten finden Sie
unter http://www.zebra.com/weee.

Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po isteku
vijeka trajanja moraju vratiti tvrtki Zebra na recikliranje. Informacije o
načinu vraćanja proizvoda potražite na web-stranici:
www.zebra.com/weee.

Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al
termine del rispettivo ciclo di vita devono essere restituiti a Symbol
al fine di consentirne il riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web:
http://www.zebra.com/weee.

Português: Para clientes da UE: todos os produtos no fim de vida
devem ser devolvidos à Symbol para reciclagem. Para obter
informações sobre como devolver o produto, visite:
http://www.zebra.com/weee.

Nederlands: Voor klanten in de EU: alle producten dienen aan het
einde van hun levensduur naar Symbol te worden teruggezonden
voor recycling. Raadpleeg http://www.zebra.com/weee voor meer
informatie over het terugzenden van producten.

Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z
eksploatacji naleźy zwrócić do firmy Symbol w celu ich utylizacji.
Informacje na temat zwrotu produktów znajdują się na stronie
internetowej http://www.zebra.com/weee.

Čeština: Pro zákazníky z EU: Všechny produkty je nutné po
skonèení jejich životnosti vrátit spoleènosti Symbol k recyklaci.
Informace o zpùsobu vrácení produktu najdete na webové stránce:
http://www.zebra.com/weee.

Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes
tagastada taaskasutamise eesmärgil Symbol'ile. Lisainformatsiooni
saamiseks toote tagastamise kohta külastage palun aadressi:
http://www.zebra.com/weee.

Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a
Symbol vállalathoz kell eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos tudnivalókért látogasson
el a http://www.zebra.com/weee weboldalra.

Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku
življenjske dobe vrniti podjetju Symbol za reciklažo. Za informacije o
vraèilu izdelka obišèite: http://www.zebra.com/weee.

Svenska: För kunder inom EU: Alla produkter som uppnått sin
livslängd måste returneras till Symbol för återvinning. Information
om hur du returnerar produkten finns på
http://www.zebra.com/weee.

Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on
palautettava kierrätettäväksi Symbol-yhtiöön, kun tuotetta ei enää
käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa
http://www.zebra.com/weee.

Dansk: Til kunder i EU: Alle produkter skal returneres til Symbol til
recirkulering, når de er udtjent. Læs oplysningerne om returnering
af produkter på: http://www.zebra.com/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της
διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Symbol για
ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση
http://www.zebra.com/weee στο Διαδίκτυο.

Malti:

Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal­ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Symbol għar­riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.zebra.com/weee.

Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť
po uplynutí doby ich životnosti vrátené spoločnosti Symbol na
recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:
http://www.zebra.com/weee.

Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų
eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją „Symbol“.
Daugiau informacijos, kaip grąžinti gaminį, rasite:
http://www.zebra.com/weee.

Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža
beigām ir jānogādā atpakaļ Symbol otrreizējai pārstrādei. Lai iegūtu
informāciju par produktu nogādāšanu Symbol, lūdzu, skatiet:
http://www.zebra.com/weee.

Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri
dönüştürme için Symbol'ya iade edilmelidir. Ürünlerin nasıl iade
edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.zebra.com/weee.

TURKISH WEEE Statement of Compliance

EEE Yönetmeliğine Uygundur Complies with EEE.

Japan (VCCI) - Voluntary Control Council for
Interference

Class B

この装置は、情報処理装置等電波障害自主規制協議会 （ＶＣＣＩ）の基準に基づくクラス
B 情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この
装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすこと
があります。 取扱説明書に従って正しい取り扱いをして下さい。VCCI - B

This is a Class B product based on the standard of the Voluntary Control
Council for Interference from Information Technology Equipment (VCCI).
If this is used near a radio or television receiver in a domestic
environment, it may cause radio interference. Install and use the
equipment according to the instruction manual.

Korea Warning Statement for Class B ITE

기 종 별 사 용 자 안 내 문
B급 기기

(가정용
방송통신기자재
)

Other Countries
Australia

Use of 5 GHz RLANs in Australia is restricted in the following band 5.60 -

5.65 GHz.

이 기기는 가정용 (B 급 )
전자파적합기기로서 주로
가정에서 사용하는 것을
목적으로 하며 , 모든 지역에서
사용할 수 있습니다 .

Brazil (UNWANTED EMISSIONS - ALL PRODUCTS)

1. Este equipamento não tem direito à proteção contra interferência
prejudicial e não pode causar interferência em sistemas devidamente
autorizados.

2. Este produto está homologado pela Anatel de acordo com os
procedimentos regulamentados para avaliação da conformidade de
produtos para telecomunicações e atende aos requisitos técnicos
aplicados, incluindo os limites de exposição da Taxa de Absorção
Específica referente a campos elétricos, magnéticos e eletromagnéticos
de radiofrequência.

Valores de SAR medidos:
Corpo: 0.47 W/kg

Chile

Este equipo cumple con la Resolución No 403 de 2008, de la
Subsecretaria de telecomunicaciones, relativa a radiaciones
electromagnéticas.
This device complies with the Resolution Not 403 of 2008, of the
Undersecretary of telecommunications, relating to electromagnetic
radiation.

China

Hong Kong

In accordance with HKTA1039, the band 5.15GHz - 5.35GHz is for
indoor operation only.

Mexico

Restrict Frequency Range to: 2.450 - 2.4835 GHz.
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su operación no
deseada.

South Korea

For a radio equipment using 2400 - 2483.5 MHz or 5725 - 5825 MHz, the
following two expression should be displayed:

해당 무선설비는 운용 중 전파혼신 가능성이 있음
해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된

서비스는 할 수 없습니다

Taiwan

臺灣
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停
用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Ukraine

Дане обладнання відповідає вимогам технічного регламенту №1057,
№ 2008 на обмеження щодо використання деяких небезпечних
речовин в електричних та електронних пристроях.

Thailand

เครื่องโทรคมนาคมและอุปกรณนี้ มีความสอดคล องตามขอกําหนดของ กทช.

Software Support

Symbol wants to ensure that customers have the latest release of
entitled software at the time of product purchase.
To confirm that your Symbol Solutions device shipped with the latest
release of entitled software, visit: www.zebra.com/support. Check for the
latest software from Software Downloads > Product Line/Product > Go.
If your device does not have the latest entitled software release as of
your product purchase date, please e-mail a request to:
[e-mail].
You must include the following essential device information with your
request:

• Model number

• Serial number

• Proof of purchase

• Title of the software download you are requesting.
If it is determined by Symbol that your device is entitled to the latest
software release, you will receive an e-mail containing a link directing
you to a Symbol Web site to download the appropriate software.

Symbol Technologies LLC End User
License Agreement

BY INSTALLING AND/OR USING THIS PRODUCT, YOU
ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT,
UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF YOU

DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, SYMBOL
TECHNOLOGIES IS NOT WILLING TO LICENSE THE PRODUCT TO
YOU, AND YOU MUST NOT USE OR INSTALL THIS PRODUCT.

Grant of License. Symbol Technologies grants you (“Licensee” or “you”)
a personal, nonexclusive, nontransferable, nonassignable, no cost
license to use the software and documentation (“Product(s)”) subject to
the terms and conditions of this Agreement. You shall use the Products
only for your internal business purposes, exclusively to support Symbol
Technologies devices. Any use of the Products outside of the conditions
set forth herein is strictly prohibited and will be deemed a breach of this
Agreement resulting in immediate termination of your License. In the
event of a breach of this Agreement, Symbol Technologies will be
entitled to all available remedies at law or in equity (including immediate
injunctive relief and repossession of all Products unless Licensee is a
Federal agency of the United States Government).

You shall not distribute, sublicense, rent, loan, lease, export, re-export,
resell, ship or divert or cause to be exported, re-exported, resold,
shipped or diverted, directly or indirectly, the Products under this
Agreement. You shall not, and shall not permit others to: (i) modify,
translate, decompile, bootleg, reverse engineer, disassemble, or extract
the inner workings of the Products, (ii) copy the look-and-feel or
functionality of the Products; (iii) remove any proprietary notices, marks,
labels, or logos from the Products; (iv) rent or transfer all or some of the
Products to any other party without Symbol Technologies' prior written
consent; or (v) utilize any computer software or hardware which is
designed to defeat any copy protection device, should the Products be
equipped with such a protection device.

Title to all copies of Products will not pass to Licensee at any time and
remains vested exclusively in Symbol Technologies. All intellectual
property developed, originated, or prepared by Symbol Technologies in
connection with the Products remain vested exclusively in Symbol
Technologies, and this Agreement does not grant to Licensee any
intellectual property rights.

Portions of the Products are protected by United States patent and
copyright laws, international treaty provisions, and other applicable laws.
Therefore, you must treat the Products like any other copyrighted
material (e.g., a book or musical recording) except that you may make
one copy of the Product solely for back-up purposes. Unauthorized
duplication of the Products constitutes copyright infringement, and in the
United States is punishable in federal court by fine and imprisonment.

Disclaimer. SYMBOL TECHNOLOGIES MAKES, AND YOU RECEIVE,
NO WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED,
STATUTORY, OR IN ANY COMMUNICATION WITH YOU. SYMBOL
TECHNOLOGIES SPECIFICALLY DISCLAIMS ANY WARRANTY
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILTY,
NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE.
THE PRODUCTS ARE PROVIDED “AS IS.” SYMBOL TECHNOLOGIES
DOES NOT WARRANT THAT THE PRODUCTS WILL MEET YOUR
REQUIREMENTS, OR THAT THE OPERATION OF THE PRODUCTS
WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS
IN THE PRODUCTS WILL BE CORRECTED. SYMBOL
TECHNOLOGIES MAKES NO WARRANTY WITH RESPECT TO THE
CORRECTNESS, ACCURACY, OR RELIABILITY OF THE PRODUCTS.
Some jurisdictions do not allow the exclusion of implied warranties, so
the above exclusion may not apply to you.

Limitation of Liability. THE TOTAL LIABILITY OF SYMBOL
TECHNOLOGIES UNDER THIS AGREEMENT FOR DAMAGES SHALL
NOT EXCEED THE FAIR MARKET VALUE OF THE PRODUCTS
LICENSED UNDER THIS AGREEMENT. IN NO EVENT WILL SYMBOL
TECHNOLOGIES BE LIABLE IN ANY WAY FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF
ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST BUSINESS
PROFITS, OR LIABILITY OR INJURY TO THIRD PERSONS,
WHETHER FORESEEABLE OR NOT, REGARDLESS OF WHETHER
SYMBOL TECHNOLOGIES HAS BEEN ADVISED OF THE
POSSIBLITY OF SUCH DAMAGES. Some jurisdictions do not permit
limitations of liability for incidental or consequential damages, so the
above exclusions may not apply to you. This Limitation of Liability
provision survives the termination of this Agreement and applies
notwithstanding any contrary provision in this Agreement. Licensee must
bring any action under this Agreement within one (1) year after the cause
of action arises.

Maintenance. Unless provided for in a separate agreement, Symbol
Technologies shall not be responsible for maintenance or field service of
the Products.

High Risk Activities. The Products are not fault-tolerant and are not
designed, manufactured or intended for use or resale as on-line control
software in hazardous environments requiring fail-safe performance,
such as in the operation of nuclear facilities, aircraft navigation or
communication systems, air traffic control, direct life support machines,
or weapons systems, in which the failure of the Products could lead
directly to death, personal injury, or severe physical or environmental
damage (“High Risk Activities”). Symbol Technologies and its suppliers
specifically disclaim any express or implied warranty of fitness for High
Risk Activities, and if you elect to use the Products in any High Risk
Activities, you agree to indemnify, defend, and hold Symbol Technologies

harmless from and against any and all costs, damages, and losses
related to that use.

U.S. Government. If you are acquiring the Products on behalf of any unit
or agency of the U.S. Government, the following shall apply. Use,
duplication, or disclosure of the Products is subject to the restrictions set
forth in subparagraphs (c) (1) and (2) of the Commercial Computer
Software - Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if
applicable, unless being provided to the Department of Defense. If being
provided to the Department of Defense, use, duplication, or disclosure of
the Products is subject to the restricted rights set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software clause
at DFARS 252.227-7013 (OCT 1988), if applicable. Products may o
not include a Restricted Rights notice, or other notice referring
specifically to the terms and conditions of this Agreement. The terms and
conditions of this Agreement shall each continue to apply, but only to the
extent that such terms and conditions are not inconsistent with the rights
provided to you under the aforementioned provisions of the FAR and
DFARS, as applicable to the particular procuring agency and
procurement transaction.

Governing Law. This Agreement shall be governed by the laws of the
United States of America to the extent that they apply and otherwise by
the laws of the State of New York without regard to its conflict of laws
provisions.

Compliance with Laws. Licensee will comply with all applicable laws and
regulations, including export laws and regulations of the United States.
Licensee will not, without the prior authorization of Symbol Technologies
and the appropriate governmental authority of the United States, in any
form export or re-export, sell or resell, ship or reship, or divert, through
direct or indirect means, any item or technical data or direct or indirect
products sold or otherwise furnished to any person within any territory for
which the United States Government or any of its agencies at the time of
the action, requires an export license or other governmental approval.
Violation of this provision will be a material breach of this Agreement,
permitting immediate termination by Symbol Technologies.

Third Party Software. The Products may contain one or more items of
Third-Party Software. The terms of this Agreement govern your use of
any Third-Party Software UNLESS A SEPARATE THIRD-PARTY
SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF
THE THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED BY THE
SEPARATE THIRD-PARTY LICENSE.

Open Source Software. The Products may contain one or more items of
Open Source Software. Open Source Software is software covered by a
publicly available license governed solely under Copyright law, whereas
the complete terms and obligations of such license attach to a licensee
solely through the act of copying, using and/or distribution of the licensed
software, such obligations often include one or more of attribution
obligations, distribution obligations, copyleft obligations, and intellectual
property encumbrances. The use of any Open Source Software is
subject to the terms and conditions of this Agreement as well as the
terms and conditions of the corresponding license of each Open Source
Software package. If there is a conflict between the terms and conditions
of this Agreement and the terms and conditions of the Open Source
Software license, the applicable Open Source Software license will take
precedence. Copies of the licenses for the included Open Source
Software, if any, as well as their attributions, acknowledgments, and
software information details, are provided in the electronic copy of this
Agreement, which is available in the Legal Notices or README file
associated with the Product. Symbol Technologies is required to
reproduce the software licenses, acknowledgments and copyright
notices as provided by the authors and owners, thus, all such information
is provided in its native language form, without modification or
translation.

Depending on the license terms of the specific Open Source Software,
source code may not be provided. Please reference and review the
entire Open Source Software information to identify which Open Source
Software packages have source code provided or available. For
instructions on how to obtain a copy of any source code made publicly
available by Symbol Technologies related to Open Source Software
distributed by Symbol Technologies, you may send your request
(including the Symbol Technologies Product name and version, along
with the Open Source Software specifics) in writing to: Symbol
Technologies LLC, Open Source Software Management, One Zebra
Plaza Holtsville, NY USA.

To view additional information regarding licenses, acknowledgments and
required copyright notices for open source packages used in this Symbol
Technologies product, touch Settings > About device > Legal
information > Open source licenses.

r may

CMM Disclosure

(Parts)

部件名称

有害物质

铅

(Pb)汞(Hg)镉(Cd)

金属部件

(Metal Parts)

电路模块

(Circuit Modules)

电缆及电缆组件

(Cables and Cable
Assemblies)

塑料和聚合物部件

(Plastic and
Polymeric Parts)

光学和光学组件

(Optics and Optical
Components)

电池

(Batteries)

本表格依据 SJ/T 11364 的规定编制。

O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规

定的限量 要求以下。

X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T

26572 规定 的限量要求。( 企业可在此处，根据实际情况对上表中
打 “×” 的技术原因进 行进一步说明。）

This table was created to comply with China RoHS requirements.

OOO O O O

XOO O O O

OOO O O O

OOO O O O

OOO O O O

OOO O O O

六价铬

(Cr(VI))

多溴联

苯

(PBB)

多溴二苯

醚

(PBDE)