Zebra SB1 and SB1-HC Smart Badge SB1 Regulatory Guide [English] (P/N 72-162415-06 Rev. A)

SB1

E Ink® Display

Scan Button

LED

Bar Code

Reader

Home Button

Lanyard Slot

Charging Contacts

Interface Contacts

Adapter

Mounting

Points

Charging Contacts

USB Contacts

REGULATORY
GUIDE

Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com

© 2017 ZIH Corp and/or its affiliates. All rights reserved.
ZEBRA and the stylized Zebra head are trademarks of
ZIH Corp, registered in many jurisdictions worldwide. All
other trademarks are the property of their respective
owners.

72-162415-06 Rev. A — May 2017

Features Regulatory Information

This guide applies to model numbers: SB1.
All Zebra devices are designed to be compliant with rules

and regulations in locations they are sold and will be
labeled as required.

Local language translations are available at the following
website: http://www.zebra.com/support

Any changes or modifications to Zebra equipment, not
expressly approved by Zebra, could void the user's
authority to operate the equipment.

CAUTION Only use Zebra approved and UL Listed

accessories, battery packs and battery chargers.

Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must be dry

before connecting to an external power source.
Declared maximum operating temperature: 40 °C.
To view regulatory information on the SB1 screen, turn off

the SB1. To turn off the SB1:

1. Press the Home button.

2. Touch . The Settings screen appears.

3. Touch More Settings.

4. Touch Advanced Settings.

5. If required, enter the Administrator PIN and touch

6. Scroll down and touch Power Off Device.

7. Touch OK. The SB1 shuts down and the Regulatory

. The Advanced Settings screen appears.

Information screen appears.

Wireless Devices Country Approvals

Regulatory markings, subject to certification, are applied
to the device signifying the radio(s) is/are approved for use
in the following countries: United States, Canada, Japan,
China, Australia, and Europe

Please refer to the Declaration of Conformity (DoC) for
details of other country markings. This is available at
http://www.zebra.com/doc.

1

: For 2.4 GHz or 5 GHz Products: Europe includes,

Note

Austria, Belgium, Bulgaria, Czech Republic, Cyprus,
Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein,
Lithuania, Luxembourg, Malta, Netherlands, Norway,

1

.

Poland, Portugal, Romania, Slovak Republic, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CAUTION Operation of the device without

regulatory approval is illegal.

Country Roaming

This device incorporates the International Roaming
feature (IEEE802.11d) which will ensure the product
operates on the correct channels for the particular country
of use.

Health and Safety Recommendations

Ergonomic Recommendations

CAUTION In order to avoid or minimize the

potential risk of ergonomic injury follow the
recommendations below. Consult with your local
Health & Safety Manager to ensure that you are
adhering to your company’s safety programs to
prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a neutral posture

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy
reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Warnings for Use of Wireless
Devices

Please observe all
usage of wireless devices.

Potentially Hazardous Atmospheres ­Fixed Installations

You are reminded of the need to observe restrictions on
the use of radio devices in fuel depots, chemical plants
etc. and areas where the air contains chemicals or
particles (such as grain, dust, or metal powders).

Safety in Aircraft

Switch off your wireless device whenever you are
instructed to do so by airport or airline staff. If your device

warning notices with regard to the

offers a 'flight mode' or similar feature, consult airline staff
as to its use in flight.

Safety in Hospitals

Wireless devices transmit radio frequency energy and
may affect medical electrical equipment.

Wireless devices should be switched off wherever you are
requested to do so in hospitals, clinics or healthcare
facilities. These requests are designed to prevent possible
interference with sensitive medical equipment.

Pacemakers

Pacemaker manufacturers recommended that a minimum
of 15 cm (6 inches) be maintained between a handheld
wireless device and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with independent research and
recommendations by Wireless Technology Research.

Persons with pacemakers:

• Should ALWAYS keep the device more than 15 cm
(6 inches) from their pacemaker when turned ON.

• Should not carry the device in a breast pocket.

• Should use the ear furthest from the pacemaker to
minimize the potential for interference.

• If you have any reason to suspect that interference is
taking place, turn OFF your device.

Other Medical Devices

Please consult your physician or the manufacturer of the
medical device, to determine if the operation of your
wireless product may interfere with the medical device.

RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

Only operate the device in accordance with the
instructions supplied.

International

The device complies with internationally recognized
standards covering human exposure to electromagnetic
fields from radio devices. For information on “International”
human exposure to electromagnetic fields refer to the
Zebra Declaration of Conformity (DoC) at
http://www.zebra.com/doc.

For further information on the safety of RF energy from
wireless devices - see
http://www.zebra.com/corporateresponsibility

Europe

Handheld Devices

This device was tested for typical body-worn operation.
Use only Zebra tested and approved belt-clips, holsters,
and similar accessories to ensure EU Compliance.

US and Canada

Handheld Devices

This device was tested for typical body-worn operation.
Use only Zebra tested and approved belt-clips, holsters,
and similar accessories to ensure FCC Compliance. The
use of third-party belt-clips, holsters, and similar
accessories may not comply with FCC RF exposure
compliance requirements, and should be avoided.

LED Devices

Complies with IEC/EN60825-1:2001 & IEC/
EN62471:2006.

Batteries

Battery Safety Guidelines

• The area in which the units are charged should be
clear of debris and combustible materials or chemicals.
Particular care should be taken where the device is
charged in a non commercial environment.

• Follow battery usage, storage, and charging guidelines
found in the SB1 User Guide.

• Improper battery use may result in a fire, explosion, or
other hazard.

• To charge the mobile device battery, the battery and
charger temperatures must be between 0 ºC and
+35 ºC (+32 ºF and +95 ºF)

• Do not use incompatible batteries and chargers. Use of
an incompatible battery or charger may present a risk
of fire, explosion, leakage, or other hazard. If you have

any questions about the compatibility of a battery or a
charger, contact Zebra Global Customer Support.

• For devices that utilize a USB port as a charging
source, the device shall only be connected to products
that bear the USB-IF logo or have completed the USB­IF compliance program.

• Do not disassemble or open, crush, bend or deform,
puncture, or shred.

• Severe impact from dropping any battery-operated
device on a hard surface could cause the battery to
overheat.

• Do not short circuit a battery or allow metallic or
conductive objects to contact the battery terminals.

• Do not modify or remanufacture, attempt to insert
foreign objects into the battery, immerse or expose to
water or other liquids, or expose to fire, explosion, or
other hazard.

• Do not leave or store the equipment in or near areas
that might get very hot, such as in a parked vehicle or
near a radiator or other heat source. Do not place
battery into a microwave oven or dryer.

• Battery usage by children should be supervised.

• Please follow local regulations to promptly dispose of
used re-chargeable batteries.

• Do not dispose of batteries in fire.

• Seek medical advice immediately if a battery has been
swallowed.

• In the event of a battery leak, do not allow the liquid to
come in contact with the skin or eyes. If contact has
been made, wash the affected area with large amounts
of water and seek medical advice.

• If you suspect damage to your equipment or battery,
contact Zebra Global Customer Support to arrange for
inspection.

Use with Hearing Aides

When some wireless devices are used near some hearing
devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, and wireless devices also vary in the
amount of interference they generate. In the event of
interference you may want to consult your hearing aid
supplier to discuss solutions.

Hearing devices may also be measured for immunity to
this type of interference. Your hearing device manufacturer
or hearing health professional may help you find results for
your hearing device. The more immune your hearing aid
is, the less likely you are to experience interference noise
from mobile phones.

Radio Frequency Interference
Requirements-FCC

Note: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part

designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and
receiver

• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV
technician for help.

15 of the FCC rules. These limits are

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.

Radio Frequency Interference
Requirements - Canada

This Class B digital apparatus complies with Canadian
ICES-003.

Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.

Radio Transmitters

This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference and (2) this
device must accept any interference received, including
interference that may cause undesired operation.

Ce dispositif est conforme à la norme CNR-210 d'Industrie
Canada applicable aux appareils radio exempts de

licence. Son fonctionnement est sujet aux deux conditions
suivantes: (1) le dispositif ne doit pas produire de
brouillage préjudiciable, et (2) ce dispositif doit accepter
tout brouillage reçu, y compris un brouillage susceptible
de provoquer un fonctionnement indésirable.

Label Marking: The Term “IC:” before the radio certification
only signifies that Industry Canada technical specifications
were met.

FCC ID: Soft Label

The FCC ID will be displayed on system shut-down.

Marking and European
Economic Area (EEA)

Statement of Compliance

Zebra hereby declares that this radio equipment is in
compliance with Directives, 2014/53/EU and 2011/65/EU.
The full text of the EU Declaration of Conformity is
available at the following internet address:
www.zebra.com/doc.

Japan (VCCI) - Voluntary Control Council for
Interference
Class B ITE

この装置は、情報処理装置等電波障害自主規制協議会

（ＶＣＣＩ）の基準に基づくクラス B 情報技術装置です。

この装置は、家庭環境で使用することを目的としていま
すが、この装置がラジオやテレビジョン受信機に近接し
て使用されると、受信障害を引き起こすことがあります。
取扱説明書に従って正しい取り扱いをして下さい。

Other Countries

Chile

“Este equipo cumple con la Resolución No 403 de 2008,
de la Subsecretaria de telecomunicaciones, relativa a
radiaciones electromagnéticas.”

China

合格证：

Eurasian Customs Union

Евразийский Тамож ен ный Союз
Данный продукт соответствует требованиям знака

EAC.

Mexico

Restrict Frequency Range to: 2.450 - 2.4835 GHz.

Tai wa n

臺灣

低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商
號或使用者均不得擅自變更頻率、加大功率或變更原設計
之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信
；經發現有干擾現象時，應立即停用，並改善至無干擾時
方得繼續使用。
前項合法通信，指依電信規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電
波輻射性電機設備之干擾。

Thailand

เครื่ องโทรคมนาคมและอปกรณนี้
มี ความสอดคล องตามข อกําหนดของ กทช .

Waste Electrical and Electronic
Equipment (WEEE)

English: For EU Customers: All products at the end of
their life must be returned to Zebra for recycling. For
information on how to return product, please go to:
http://www.zebra.com/weee
Français : Clients de l'Union Européenne : Tous les
produits en fin de cycle de vie doivent être retournés à
Zebra pour recyclage. Pour de plus amples informations
sur le retour de produits, consultez :
http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los
productos deberán entregarse a Zebra al final de su ciclo
de vida para que sean reciclados. Si desea más
información sobre cómo devolver un producto, visite:
http://www.zebra.com/weee.

Deutsch: Für Kunden innerhalb der EU: Alle Produkte
müssen am Ende ihrer Lebensdauer zum Recycling an
Zebra zurückgesandt werden. Informationen zur
Rücksendung von Produkten finden Sie unter
http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti
al termine del rispettivo ciclo di vita devono essere restituiti
a Zebra al fine di consentirne il riciclaggio. Per
informazioni sulle modalità di restituzione, visitare il
seguente sito Web: http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim
de vida devem ser devolvidos à Zebra para reciclagem.
Para obter informações sobre como devolver o produto,
visite: http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen
aan het einde van hun levensduur naar Zebra te worden
teruggezonden voor recycling. Raadpleeg
http://www.zebra.com/weee voor meer informatie over het
terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty
wycofane z eksploatacji nale¿y zwróciæ do firmy Zebra w
celu ich utylizacji. Informacje na temat zwrotu produktów
znajduj¹ siê na stronie internetowej
http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné
po skonèení jejich životnosti vrátit spoleènosti Zebra
k recyklaci. Informace o zpùsobu vrácení produktu najdete
na webové stránce: http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea
lõppedes tagastada taaskasutamise eesmärgil Zebra'ile.
Lisainformatsiooni saamiseks toote tagastamise kohta
külastage palun aadressi: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement
terméket a Zebra vállalathoz kell eljuttatni újrahasznosítás
céljából. A termék visszajuttatásának módjával
kapcsolatos tudnivalókért látogasson el a
http://www.zebra.com/weee weboldalra.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku
življenjske dobe vrniti podjetju Zebra za reciklažo. Za
informacije o vraèilu izdelka obišèite:
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som
uppnått sin livslängd måste returneras till Zebra för
återvinning. Information om hur du returnerar produkten
finns på http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki
tuotteet on palautettava kierrätettäväksi Zebra-yhtiöön,
kun tuotetta ei enää käytetä. Lisätietoja tuotteen
palauttamisesta on osoitteessa
http://www.zebra.com/weee.

Dansk: Til kunder i EU: Alle produkter skal returneres til
Zebra til recirkulering, når de er udtjent. Læs
oplysningerne om returnering af produkter på:
http://www.zebra.com/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο
τέλος της
στην Zebra για ανακύκλωση. Για περισσότερες
πληροφορίες σχετικά με την επιστροφή ενός προϊόντος,
επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee
στο ∆ιαδίκτυο.

Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-
aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand
Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek
tirritorna l-prodott, jekk jogħġbok żur:
http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku
življenjske dobe vrniti podjetju Zebra za reciklažo. Za
informacije o vračilu izdelka obiščite:
http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky
musia byť po uplynutí doby ich životnosti vrátené
spoločnosti Zebra na recykláciu. Bližšie informácie o
vrátení výrobkov nájdete na: http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų
eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją
„Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite:
http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas
mūža beigām ir jānogādā atpakaļ Zebra otrreizējai
pārstrādei. Lai iegūtu informāciju par produktu
nogādāšanu Zebra, lūdzu, skatiet:
http://www.zebra.com/weee.
Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po
isteku vijeka trajanja moraju vratiti tvrtki Zebra na
recikliranje. Informacije o načinu vraćanja proizvoda
potražite na web-stranici: www.zebra.com/weee.

διάρκειας ζωή ς τους, πρέπει να επιστρέφονται

TURKISH WEEE Statement of
Compliance

EEE Yönetmeliğine Uygundur

Software Support

Zebra wants to ensure that customers have the latest
release of entitled software at the time of product
purchase.

To confirm that your Zebra device shipped with the latest
release of entitled software, visit: www.zebra.com/support.
Check for the latest software from Software Downloads >
Product Line/Product > Go.

If your device does not have the latest entitled software
release as of your product purchase date, please e-mail a
request to Zebra at: [e-mail].

You must include the following essential device
information with your request:

• Model number

• Serial number

• Proof of purchase

• Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to

the latest software release, you will receive an e-mail
containing a link directing you to a Zebra Web site to
download the appropriate software.

Service Information

If you have a problem using the equipment, contact your
facility’s Technical or Systems Support. If there is a
problem with the equipment, they will contact the Zebra
Global Customer Support at:
http://www.zebra.com/support.

For the latest version of this guide go to:
http://www.zebra.com/support.

Warranty

For the complete Zebra hardware product warranty
statement, go to: http://www.zebra.com/warranty.

Zebra reserves the right to make changes to any product
to improve reliability, function, or design. Zebra does not
assume any product liability arising out of, or in connection
with, the application or use of any product, circuit, or
application described herein. No license is granted, either
expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material,
method, or process in which Zebra products might be
used. An implied license exists only for equipment,
circuits, and subsystems contained in Zebra products.

CMM Disclosure

部件名称

(Parts)

金属部件

(Metal Parts)

电路模块

(Circuit Modules)

电缆及电缆组件

(Cables and Cable
Assemblies)

塑料和聚合物部件

(Plastic and
Polymeric Parts)

光学和光学组件

(Optics and Optical
Components)

电池

(Batteries)

本表格依据SJ/T 11364 的规定编制。

O: 表示该有害物质在该部件所有均质材料中的含量均在

GB/T 26572 规定的限量要求以下。

X: 表示该有害物质至少在该部件的某一均质材料中的含量

超出GB/T 26572 规定的限量要求。(企业可在此处，根
据实际情况对上表中打“×”的技术原因进行进一步说
明。）

This table was created to comply with China RoHS
requirements.

有害物质

镉

六价

多溴联

铅

(Pb)汞(Hg)

OOO O O O

XOO O O O

OOO O O O

OOO O O O

OOO O O O

OOO O O O

(Cd)

铬

(Cr(VI))

苯

(PBB)

多溴二
苯醚

(PBDE)