Important Safety and Regulatory Information
for the ZebraNet® PS4000 Print System
Keep this Guide readily accessible. It contains important
safety information.
Battery and Power Supply Safety
Caution • Use the Correct Zebra Power Source
Use the ZebraNet PS4000 Print System only with the Zebra
Technologies Model LA-24 Battery Pack and its charger power supply.
Follow the safety and usage guide provided with the LA-24 Battery
Pack.
Use of any power supply not approved specifically by Zebra for use
with the ZebraNet PS4000 Print System and the LA-24 Battery Pack
could cause damage to the server and will void the warranty.
Caution • Ensure Correct AC Compatibility
• Ensure that the ZebraNet PS4000 Print System battery charger power
supply is supplied with the proper AC power cord for the intended
country of use .
• The Charger Power Supply must be plugged into a properly grounded
AC outlet.
Important • Charger Power Supply Location
• Use care in locating the Charger Power Supply. Never locate the power
supply near any source of combustible material. Do not place it in locations where liquids or metallic objects may be dropped into the Power
Supply.
• Ensure the Charger Power Supply has adequate ventilation.
Important • Indoor Use Only
The Charger Power Supply shipped with the ZebraNet PS4000 Print
System is intended for indoor use only.
Important • Power Supply Maintenance
• Clean only with a dry or slightly damp, lint free cloth.
• Never operate a Charger Power Supply that has been damaged in any
way.
• Do not disassemble the Charger Power Supply. There are no user serviceable components inside.
Print System Safety
Caution • Locate the Print System Properly
• Locate the Print System where its installation will not interfere with
normal movement of personnel.
• Ensure that all cabling connecting the Print System and the power supply are properly secured so that they will not present a hazard to personnel movement.
• Do not disassemble the Print System. There are no user serviceable
components inside..
Important • Indoor Use Only
The ZebraNet PS4000 Print System is intended for indoor use only.
continued
AA18332-102 pg. 1 ZebraNet PS4000 Print System Safety Guide
Important • Use Only With Zebra Printers
The ZebraNet PS4000 Print System is intended for use only with Zebra
Model LP and TLP28xx series and Models R2844-Z and R402 desktop
printers. Use of this server with printers not specified by Zebra may
result in unreliable performance. Zebra will not provide technical support for this product with use with third party printers
Always observe the Thermal Printer Safety Guidelines below..
Important • Use Only Zebra Cables
If using the Print System with an auxiliary printer only use the cables
specified by Zebra to connect this printer to the System and to supply
power to any printers or ancillary equipment. Failure to do so will void
the warranty and could cause damage to any equipment so connected.
Thermal Printer Safety
Important • Indoor Use Only
Any printer and/or any associated power supply which is a component
of the ZebraNet PS4000 Print System should never be operated in a
location where either one can get wet. Personal injury could result.
Important • Use Approved Media
Always use high-quality, approved labels and tags. If adhesive backed
labels are used that DO NOT lay flat on the backing liner, the exposed
edges may stick to the label guides and rollers inside the printer, causing the label to peel off from the liner and jam the printer.
Caution • Static Discharge
The discharge of electrostatic energy that accumulates on the surface
of the human body or other surfaces can damage or destroy the print
head or electronic components used in this device. DO NOT TOUCH the
print head or the electronic components under the top cover.
Caution • Thermal Printing
The print head becomes hot while printing. To protect from damaging
the print head and risk of personal injury, avoid touching the print head.
Use only the cleaning pen to perform maintenance.
ZebraNet PS4000 Print System Safety Guide pg. 2 AA18332-102
Loading...