Information in this document is subject to change without notice. The software described in this document
is furnished under a license agreement or nondisclosure agreement. The software may be used or copied
only in accordance with the terms of those agreements.
For further information regarding legal and proprietary statements, please go to:
SOFTWARE: zebra.com/linkoslegal.
COPYRIGHTS: zebra.com/copyright.
WARRANTY: zebra.com/warranty.
END USER LICENSE AGREEMENT: zebra.com/eula.
Terms of Use
Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries
(“Zebra Technologies”). It is intended solely for the information and use of parties operating and
maintaining the equipment described herein. Such proprietary information may not be used, reproduced,
or disclosed to any other parties for any other purpose without the express, written permission of Zebra
Technologies.
Copyright
Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are
subject to change without notice.
Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are
correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and
disclaims liability resulting therefrom.
Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the
accompanying product (including hardware and software) be liable for any damages whatsoever (including,
without limitation, consequential damages including loss of business profits, business interruption, or loss
of business information) arising out of the use of, the results of use of, or inability to use such product, even
if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
Contents
About this Document...................................................................................................................................... 4
This document provides information on using the RFD9030 Ultra-Rugged Standard-Range UHF RFID sled
and the RFD9090 Long-Range Ultra-Rugged UHF RFID sled.
Notational Conventions
The following conventions are used in this document:
Bold text is used to highlight the following:
•Dialog box, window, and screen names.
•Drop-down list and list box names.
•Checkbox and radio button names.
•Checkbox and radio button names.
•Icons on a screen.
•Key names on a keypad.
•Button names on a screen.
Bullets (•) indicate:
•Action items.
•List of alternatives.
•Lists of required steps that are not necessarily sequential.
Sequential lists (for example, those that describe step-by-step procedures) appear as numbered lists.
Service Information
If you have a problem with your equipment, contact Zebra Global Customer Support for your region.
Contact information is available at: zebra.com/support.
When contacting support, please have the following information available:
•Serial number of the unit
•Model number or product name
•Software type and version number
Zebra responds to calls by email, telephone, or fax within the time limits outlined in support agreements.
4
About this Document
If your problem cannot be solved by Zebra Customer Support, you may need to return your equipment
for servicing and will be given specific directions. Zebra is not responsible for any damages incurred
during shipment if the approved shipping container is not used. Shipping the units improperly can void the
warranty.
If you purchased your Zebra business product from a Zebra business partner, contact that business partner
for support.
5
Getting Started
Getting Started
The RFD90 Ultra-Rugged UHF RFID sled provides RAIN Radio Frequency Identification (RFID) tag
reading, writing, and locating capability to support Zebra mobile computers and other host devices. This
section provides information on sled features, adaptor installation, mobile computer attachment, battery
replacement, UI indications, and charging.
To use the RFD90 sled for the first time with a mobile computer:
1. Insert the battery into the device.
2. Charge the RFD90 sled using the charging cradle or charging cup.
3. Replace the cover with the adaptor that is specific to the mobile computer to be used with the sled.
4. Place the mobile computer into the adaptor bottom first.
5. Secure the mobile computer into the adaptor by pressing down on the center of the top of the mobile
computer.
6. Set the region using 123RFID Desktop or 123RFID Mobile applications.
For the latest versions of guides and software, go to: zebra.com/support.
Unpacking
For detailed information, refer to the Product Reference Guide at: zebra.com/support.
This section provides information on Zebra RFD90 Ultra-Rugged UHF RFID Sled sled parts, battery
installation, mobile device attachment, LED indications, and charging. Carefully remove all protective
material from the RFD90 Ultra-Rugged sled and save the shipping container for later storage and shipping.
Verify the following items are in the box:
•RFD90 Ultra-Rugged UHF RFID Sled
•Battery
•Quick Start Guide
Inspect the equipment for damage. If any equipment is missing or damaged, contact the Zebra Support
Center immediately.
For a full list of accessories that can be used with the RFD90 Ultra-Rugged UHF RFID sled, refer to the
product-specific Technical Accessory Guide available at: zebra.com/support.
6
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.