MC45
FEATURES KEYPAD GETTING STARTED
Quick Start Guide
1
2
3
4
5
6
1 Receiver
2 Programmable
Button (Scan)
3 MicroUSB Port
4 Scan Button
5 Up/Down Button
6 Keypad
7 Power Button
11
10
7
8
9
Microphone
8
9
Charging Connector
10
Touch Screen
(with screen protector)
11
Charging/Battery Status LED
12 Battery Cover
13 Handstrap Mount
14 Scan Window
( see Data Capture Options)
15 Tether Point
16 3.2 MPixel Camera
13
14
12
17 Camera Flash
18 Volume Buttons
19 Programmable Button
(Camera)
20 Stylus
21 Battery Cover Latch
18
17
16
15
MicroSD and SIM Card Installation
1
Insert the Battery
2
3
Charge the MC45
24hr *
1
1
21
20
19
Blue Key
Use this key to access function keys shown on the keypad in blue.
> Press the blue key once to activate this mode followed by
another key.
> Press the blue key twice to lock the keypad in the blue keys mode.
> Press the blue key again to return to the normal mode.
Orange Key
Use this key to access the secondary layer of characters and actions.
> Press the orange key once to activate this mode followed by
another key.
> Press the orange key twice to lock the keypad in the orange
keys mode .
> Press the orange key again to return to the normal mode.
Note: See the MC45 User Guide for detailed keypad information.
Numeric Keypad
5
3
6
7
2
2
4
3
Charging/Battery Status LED
Slow Blinking Green = Charging
Solid Green = Fully Charged
Fast Blinking Red = Charging Error
Note: To lock the battery cover, slide the battery cover latch to the right
until the red dot is not visible.
It is recommended that this product be charged for 24 hours before the first use
*
to ensure that the internal battery is fully charged.
Install ActiveSync
4
Download ActiveSync 4.5 or higher from
http://www.microsoft.com and follow the instructions
to install ActiveSync onto the host computer.
5
Communicate with Host
Zebra Technologies Corporation
Lincolnshire, IL U.S.A
http://www.zebra.com
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol
logo is a registered trademark of Symbol Technologies, Inc., a Zebra Technologies
company. © 2015 Symbol Technologies, Inc.
72-164157-02 Rev A – February 2015
MC45
Quick Start Guide
®
®
6
Create a Partnership
Follow the on-screen ActiveSync 4.5 instructions to establish a
connection between the MC45 and the host computer.
®
Battery Removal
Turn off the MC45 before removing the battery. If the
MC45 is in suspend mode, press the red Power button to wake the
MC45. Press the red Power button for 3 seconds until a screen
appears. Select the Power Off option to turn off the MC45.
1
Eject icon
Green indicators
Red dot
2
3
Note: To unlock and remove the battery cover, slide the battery cover latch to
the left until the green indicators align with the eject icon and the red dot
is visible. The battery cover ejects slightly. Lift to remove.
http://www.zebra.com/mc45
Screen Protector
Zebra recommends the use of a screen protector to minimize
wear and tear. Screen protectors enhance the usability and
durability of touch screen displays. Benefits include:
• Protection from scratches and gouges
Not using a screen protector can affect your warranty coverage.
An initial screen protector is already applied to your MC45.
Contact your local account manager or Zebra, Inc. for more
information and purchasing details.
Vehicle Charge Cradle
• Durable writing and touch
surface with tactile feel
• Abrasion and chemical
resistance
• Glare reduction
• Keeping the device’s screen
looking like new
• Quick and easy installation.
Power Supply
Single Slot Charge Cradle
Four Slot Battery Charger
Auto Charge Cable
Multi Slot Universal Charge
Only Cradle
micro USB Adapter
DATA CAPTURE OPTIONS
Laser Scanning
Camera Decode
1. Launch a barcode reading
application on the MC45.
2. Point the MC45 towards
the barcode.
3. Press the Scan button.
4. In the image window, align the
camera over the barcode.
When the MC45 decodes the barcode, a beep sounds.
5. Release the Scan button.
Camera Photo
1. Tap Start > Pictures & Videos.
2. Point the MC45 at an object.
3. Press the Camera button.
4. Hold the MC45 still until the “Shutter Sound” is heard.
GPS Information
When using the GPS feature of the MC45:
Acquiring satellite signals may take a few minutes. It is best
•
to be outside and have a clear, unobstructed view of the sky.
Without a clear view, acquisition takes much longer and could
•
result in the MC45 being unable to compute the initial position
quickly.
Obtain a satellite fix before moving.
•
Shutdown GPS application when not in use to extend
•
battery life.
AVOID EXTREME WRIST ANGLESACCESSORIES
AVOID EXTREME
WRIST ANGLES
Loading...