the most updated warranty terms.
Service Information
If you have a problem with your equipment, contact Zebra support for your region.
For contact information, go to: http://www.zebra.com/support.
When contacting Zebra support, please have the following information available:
• Serial number of the unit
• Model number or product name
• Software type and version number
Zebra responds to calls by e-mail, telephone or fax within the time limits set forth in
service agreements. If your problem cannot be solved by Zebra Support, you may
need to return your equipment for servicing and will be given specific directions.
Zebra is not responsible for any damages incurred during shipment if the approved
shipping container is not used. Shipping the units improperly can possibly void the
warranty.
If you purchased your Zebra business product from a Zebra business partner,
please contact that business partner for support.
For the latest version of this guide, go to:
http://www.zebra.com/support.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
© 2017 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head
are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks
are the property of their respective owners.
DS6878
Regulatory Guide
CAUTION
Only use Zebra approved and UL Listed accessories, battery
packs and battery chargers.
Laser Devices
+65 6858 0722. You may also visit our website: http://www.zebra.com for
72-133191-04 Revision A - May 2017
you have any queries, please call Zebra Technologies Corporation at
to any rights and remedies you may have under the Australian Consumer Law. If
Zebra Technologies Corporation Australia's limited warranty above is in addition
failure does not amount to a major failure.
goods repaired or replaced if the goods fail to be of acceptable quality and the
other reasonably foreseeable loss or damage. You are also entitled to have the
entitled to a replacement or refund for a major failure and compensation for any
guarantees that cannot be excluded under the Australia Consumer Law. You are
Road, #05-02/03, Singapore 068895, Singapore. Our goods come with
This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson
For Australia Only
Ergonomic Recommendations
Regulatory Information
This guide applies to the following Model Number: DS6878. All Zebra devices are
designed to be compliant with rules and regulations in locations they are sold and will be
labeled as required.
Any changes or modifications to Zebra equipment, not expressly approved by Zebra,
could void the user's authority to operate the equipment.
Local language translations are available at the following web site:
http://www.zebra.com/support.
Bluetooth® Wireless Technology
This is an approved Bluetooth®
Listing, visit the following Web site: http://www.bluetooth.org/tpg/listings.cfm.
Wireless Device Country Approvals
Regulatory markings, subject to certification, are applied to the device signifying the
radio(s) is/are approved for use in the following countries: United States, Canada,
Japan, China, S. Korea, Australia and Europe
Please refer to the Zebra Declaration of Conformity (DoC) for details of other country
markings. This is available at the following Web site:
http://www.zebra.com/doc.
Note 1: For 2.4GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech
Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
Operation of the device without regulatory approval is illegal.
product. For more information or to view End Product
1
.
• Improve work procedures.
• Provide a suitable working environment.
• Provide adequate clearance.
• Provide adjustable workstations.
• Reduce or eliminate direct pressure.
• Reduce or eliminate vibration.
• Perform tasks at correct heights.
• Keep objects that are used frequently within easy reach.
• Reduce or eliminate excessive force.
• Maintain a natural position.
• Reduce or eliminate repetitive motion.
employee injury.
ensure that you are adhering to your company's safety programs to prevent
the recommendations below. Consult with your local Health & Safety Manager to
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow
Health and Safety Recommendations
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless devices.
Potentially Hazardous Atmospheres - Vehicle Use
You are reminded of the need to observe restrictions on the use of radio devices in fuel
depots, chemical plants etc. and areas where the air contains chemicals or particles
(such as grain, dust, or metal powders) and other areas where you would normally be
advised to run off your vehicle engine.
Potentially Hazardous Atmospheres - Fixed Installations
You are reminded of the need to observe restrictions on the use of radio devices in fuel
depots, chemical plants, etc. and areas where the air contains chemicals or particles
(such as grain, dust, or metal powders).
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport or airline
staff. If your device offers a “flight mode” or similar feature, consult airline staff as to its
use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical electrical
equipment.Wireless devices should be switched off wherever you are requested to do
so in hospitals, clinics or health care facilities.These requests are designed to prevent
possible interference with sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be
maintained between a handheld wireless device and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are consistent with
independent research and recommendations by Wireless Technology Research.
http://www.zebra.com/warranty.
For the complete Zebra hardware product warranty statement, go to:
Warranty
http://www.zebra.com
Lincolnshire, IL U.S.A.
Zebra Technologies Corporation
hereby acknowledged.
trademarks or registered trademarks of their respective companies and are
Technologies company. Other product names mentioned in this manual may be
Symbol logo is a registered trademark of Symbol Technologies, Inc., a Zebra
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The
for complete copyright, conditions and disclaimer information.
Software, and Publicly Available Software. Refer to the Product Reference Guide
This Zebra product may include Zebra Software, Commercial Third Party
contained in Zebra products.
be used. An implied license exists only for equipment, circuits, and subsystems
apparatus, machine, material, method, or process in which Zebra products might
under any patent right or patent, covering or relating to any combination, system,
No license is granted, either expressly or by implication, estoppel, or otherwise
the application or use of any product, circuit, or application described herein.
Zebra does not assume any product liability arising out of, or in connection with,
function, or design.
Zebra reserves the right to make changes to any product to improve reliability,
© 2015 Symbol Technologies, Inc.
Persons with Pacemakers:
• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker
when turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimise the potential for
interference.
• If you have any reason to suspect that interference is taking place, turn OFF your
device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to determine if
the operation of your wireless product may interfere with the medical device.
FCC / EU Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with Internationally recognized standards covering human
exposure to electromagnetic fields from radio devices. For information on “International”
human exposure to electromagnetic fields refer to the Zebra Declaration of Conformity
(DoC) at http://www.zebra.com/doc.
Handheld Devices
To comply with FCC RF and EU RF exposure requirements, this device must be
operated in the hand with a minimum separation distance of 20cm or more from a
person’s body. Other operating configurations should be avoided.
Class 1 Laser devices are not considered to be hazardous when used for their intended
purpose.
Laser Warning Label -Class 1
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A LASER DE CLASSE 1
Class 2 laser scanners use a low power, visible light diode. As with any very bright light
source such as the sun, the user should avoid staring directly into the light beam.
Momentary exposure to a Class 2 laser is not known to be harmful.
The following statement is required to comply with US and international regulations.
Caution: Use of controls, adjustments, or the performance of procedures other than
those specified herein may result in hazardous laser light exposure.
Scanner Labeling
Labels Read:
1. Laser Light - do not stare into beam Class 2 Laser product.
2. Caution - Class 3R laser light when open. Avoid direct eye exposure.
3. Complies with 21 CFR1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007, and IEC 60825-1 (Ed.2.0), EN 60825-1:2007 and/
or IEC/EN 60825-1:2014.
Scanner Labeling
Marking and European Economic Area (EEA)
ሶቑ孔函ቒᇬ㍔⫀⑵䚕孔函䷘榊㽱椫⹂呹尞Ⓟ◣巿↩᧤ᨒ᧿᧿ᨅ᧥ቑ⪉䄥⪉ቈሲኌኖB
⫀㔏嫢孔函ቊሼᇭሶቑ孔函ቒᇬ⹅ㄼ䜿⬒ቊ∎䞷ሼቮሶቋት䥽䤓ቋሺሧቡሼሯᇬሶቑ孔函ሯ
ንኇቧኣዉኰንዄዐ♦≰㳮扠㘴ሺ∎䞷ሸቯቮቋᇬ♦≰椫⹂ትㆤሰ怆ሶሼሶቋሯሥቭቡ
ሼᇭ ♥㔀崻㢝㦇㈢ቆ㷲ሺሧ♥ቭ㔀ሧትሺₚሸሧᇭ
LASER LIGHT- DO NOT STARE INTO BEAM . CLASS 2 LASER
PRODUCT. LASERLICHT LASER KLASSE 2. LUMIÈRE LASER - NE PAS REGARDER DANS
LE
FAISCEAU. APPAREILÀ LASER DE CLASSE 2 630-680nm,
NICHT IN DEN STRAHL BLICKEN.
• Do not dispose of batteries in fire.
• Seek medical advice immediately if a battery has been swallowed.
• In the event of a battery leak, do not allow the liquid to come in contact with the skin or
eyes. If contact has been made, wash the affected area with large amounts of water and
seek medical advice.
• If you suspect damage to your equipment or battery, contact Zebra support to arrange for
inspection.
Taiwan - Recycling
EPA (Environmental Protection Administration) requires dry battery producing or
importing firms in accordance with Article 15 of the Waste Disposal Act are required to
indicate the recycling marks on the batteries used in sales, giveaway or promotion.
Contact a qualified Taiwanese recycler for proper battery disposal.
Radio Frequency Interference Requirements-FCC
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
communications. However there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
against harmful interference in a residential installation. This
harmful interference to radio
Korean Warning Statement for Class B ITE
기 종 별
B급 기기
( 가정용 방송통신기기 )
이 기기는 가정용 (B 급 ) 으로 전자파적합등록을
한 기기로서 주로 가정에서 사용하는 것을 목적
으로 하며 , 모든 지역에서 사용할 수 있습니다 .
사 용 자 안 내 문
Other Countries
Brasil: Declarações Regulamentares para DS6878
Nota: A marca de certificação se aplica ao Transceptor, modelo DS6878. Este
equipamento opera em caráter secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar
interferência a sistemas operando em caráter primário.
Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br
Ukraine
CHILE: Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de
telecomunicaciones, relativa a radiaciones electromagnéticas.
Mexico: Restrict Frequency Range to: 2.450 - 2.4835 GHz.
Korean
鲮뼩 ꓩꟹ鱉 끩끞 닆 놹볁뿱겕 閵鱚ꫦ넩 넽넁
鲮뼩 ꓩꟹ 鱉놹볁뿱 겕 閵鱚ꫦ넩 넽냱ꕵꈑ 넭ꐺ껽놹隱 隵ꇝ鷑 ꟹ걙鱉 뼕 ꯍ 꽻걪鱽鲙
Waste Electrical and Electronic Equipment (WEEE)
English: For EU Customers: All products at the end of their life must be returned to Zebra for
recycling. For information on how to return product, please go to:
http://www.zebra.com/weee.
Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да
се връщат на Zebra за рециклиране. За информация относно връщането на продукти,
моля отидете на адрес: http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit
spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové
stránce: http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er
udtjent. Læs oplysningerne om returnering af produkter på: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer
zum Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von
Produkten finden Sie unter http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise
eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun
aadressi: http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra
al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo
devolver un producto, visite: http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος
να επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο
∆ιαδίκτυο.
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être
retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits,
consultez : http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita
devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle
modalità di restituzione, visitare il seguente sito Web: http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti
utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://
www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ
Zebra otrreizējai pārstrādei. Lai iegūtu informā
skatiet: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell
eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a http://www.zebra.com/weee weboldalra.
ciju par produktu nogādāšanu Zebra, lūdzu,
της διάρκειας ζωής τους, πρέπει
Batteries
Zebra rechargeable battery packs are designed and constructed to the highest
standards within the industry.
However, there are limitations to how long a battery can operate or be stored before
needing replacement. Many factors affect the actual life cycle of a battery pack, such as
heat, cold, harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in overall
battery quality may occur. Store batteries at half of full charge in a dry, cool place,
removed from the equipment to prevent loss of capacity, rusting of metallic parts and
electrolyte leakage. When storing batteries for one year or longer, the charge level
should be verified at least once a year and charged to half of full charge.
Replace the battery when a significant loss of run time is detected.
Battery Safety Guidelines
• The area in which the units are charged should be clear of debris and combustible
materials or chemicals. Particular care should be taken where the device is charged in a
non commercial environment.
• Follow battery usage, storage, and charging guidelines found in the user’s guide.
• Improper battery use may result in a fire, explosion, or other hazard.
• To charge the mobile device battery, the battery and charger temperatures must be
between +32 °F and +104 °F (0 °C and +40 °C).
• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger
may present a risk of fire, explosion, leakage, or other hazard. If you have any questions
about the compatibility of a battery or a charger, contact Zebra support.
• For devices that utilize a USB port as a charging source, the device shall only be connected
to products that bear the USB-IF logo or have completed the USB-IF compliance program.
• Do not disassemble or open, crush, bend or deform, puncture, or shred.
• Severe impact from dropping any battery-operated device on a hard surface could cause
the battery to overheat.
• Do not short circuit a battery or allow metallic or conductive objects to contact the battery
terminals.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse
or expose to water or other liquids, or expose to fire, explosion, or other hazard.
• Do not leave or store the equipment in or near areas that might get very hot, such as a
parked vehicle or near a radiator or other heat source. Do not place battery into a
microwave oven or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to promptly dispose of used re-chargeable batteries.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Radio Transmitters
This device complies with RSS 210 of Industry & Science Canada. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Label Marking: The term “IC:” before the radio certification only signifies that Industry
Canada technical specifications were met.
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with Directive 2011/65/EU
and 1999/5/EC or 2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th June 2017).
The full text of the EU Declaration of Conformity is available at the following internet
address: http://www.zebra.com/doc
Japan (VCCI) - Voluntary Control Council for Interference
Class B ITE
This is a Class B product based on the standard of the Voluntary Control Council for
Interference from Information Technology Equipment (VCCI). If this is used near a radio or
television receiver in a domestic environment, it may cause radio interference. Install and
use the equipment according to the instruction manual.
Taiwan
Eurasian Customs Union
Евразийский Таможенны й Союз
Данный продукт соответствует требованиям знака EAC.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu
jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott,
jekk jogħġbok żur: http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur
naar Zebra te worden teruggezonden voor recycling. Raadpleeg
http://www.zebra.com/weee voor meer informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ
do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na
stronie internetowej http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à
Zebra para reciclagem. Para obter informações sobre como devolver o produto, visite:
http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare,
trebuie returnate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului,
accesaţi: http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju
Zebra za reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi
Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till
Zebra för återvinning. Information om hur du returnerar produkten finns på
http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya
iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.zebra.com/weee.
Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po isteku vijeka trajanja moraju vratiti
tvrtki Zebra na recikliranje. Informacije o načinu vraćanja proizvoda potražite na web-stranici:
www.zebra.com/weee.
Loading...