Zebra DS4608-SR and DS4608-HC General Purpose Scanner DS4608-HC Digital Scanner Quick Start Guide (en)

DS4608-HC

Digital Scanner

Quick Start Guide

MN-004107-01EN Rev. A

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in
many jurisdictions worldwide. All other trademarks are the property of their respective owners.
© 2021 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Information in this document is subject to change without notice. The software described in this document
is furnished under a license agreement or nondisclosure agreement. The software may be used or copied
only in accordance with the terms of those agreements.

For further information regarding legal and proprietary statements, please go to:

SOFTWARE:zebra.com/linkoslegal
COPYRIGHTS:zebra.com/copyright
WARRANTY:zebra.com/warranty
END USER LICENSE AGREEMENT: zebra.com/eula

Terms of Use

Proprietary Statement

This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries
(“Zebra Technologies”). It is intended solely for the information and use of parties operating and
maintaining the equipment described herein. Such proprietary information may not be used, reproduced,
or disclosed to any other parties for any other purpose without the express, written permission of Zebra
Technologies.

Product Improvements

Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are
subject to change without notice.

Liability Disclaimer

Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are
correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and
disclaims liability resulting therefrom.

Limitation of Liability

In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the
accompanying product (including hardware and software) be liable for any damages whatsoever
(including, without limitation, consequential damages including loss of business profits, business
interruption, or loss of business information) arising out of the use of, the results of use of, or inability to
use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some
jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.

Publication Date

March 12, 2021

2

Introduction

3

2

1

This guide provides basic instructions for setting up, programming, and using DS4608-HC scanners.

Features

DS4608-HC Digital Scanner Quick Start Guide

1 LED Indicator
2 Scan Window
3 Scan Trigger

Presentation Mode

3

DS4608-HC Digital Scanner Quick Start Guide

Connect a USB Host Interface

The scanner automatically detects the host interface type and uses the default setting.

Useful Barcodes

NOTE: An asterisk (*) indicates the default setting.

Set Defaults

Add a Tab Key

To add a Tab key after scanned data, scan the barcode below.

*

USB Keyboard HID

Return to Factory Defaults

Add a Tab Key

4

DS4608-HC Digital Scanner Quick Start Guide

Add an Enter Key (Carriage Return/Line Feed)

To add an Enter key after scanned data, scan the barcode below.

Add Enter Key (Carriage Return/line Feed)

USB Caps Lock Override

USB-Override Caps Lock Key

(Enable)

Night Mode with Vibrate

Enable Night Mode Trigger

* USB - Do Not Override Caps Lock Key

(Disable)

* Disable Night Mode Trigger

Toggle Night Mode

5