Zebra DC600 Floor Guard DC600 Floor Guard Quick Start Guide English

http://www.symbol.com/patents

This product is covered by one or more of the patents listed on the web site:

Patents

http://www.symbol.com

Holtsville, N.Y. 11742-1300
One Symbol Plaza
Symbol Technologies, Inc.

http://www.symbol.com/warranty

For the complete Symbol hardware product warranty statement, go to:

Warranty

http://www.symbol.com/patents

This product is covered by one or more of the patents listed on the web site:

Patents

http://devzone.symbol.com

Symbol Devzone web site:
Software updates, SDKs, development support and related documents are available from the

http://www.symbol.com/manuals

web site:
Supporting documents are available for viewing/download from the Symbol documentation

Reference Documents

http://www.symbol.com

Holtsville, N.Y. 11742-1300
One Symbol Plaza
Symbol Technologies, Inc.
respective companies and are hereby acknowledged.
product names mentioned in this manual may be trademarks or registered trademarks of their
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other
exists only for equipment, circuits, and subsystems contained in Symbol products.

material, method, or process in which Symbol products might be used. An implied license

patent right or patent, covering or relating to any combination, system, apparatus, machine,
No license is granted, either expressly or by implication, estoppel, or otherwise under any
application or use of any product, circuit, or application described herein.
Symbol does not assume any product liability arising out of, or in connection with, the
design.
Symbol reserves the right to make changes to any product to improve reliability, function, or
© 2005 SYMBOL TECHNOLOGIES, INC. All rights reserved.

material.

7. Replace the DC600 Floor Guard and attach with fasteners appropriate for the floor

the floor material.

6. Remove the DC600 Floor Guard and prepare the floor for mounting as applicable for

5. Use the Floor Guard to mark the mounting hole locations on the floor

mounting template locating holes.

4. Use the mounting template to locate the DC600 Floor Guard directly over the

template shows the position of the Floor Guard two right hand mounting holes.
mounting holes with the mounting holes on the mounting template. The mounting

3. Position the DC600 Mounting Template under the DC600 and line up the DC600

mounting holes.
mounting template and fit the template around the DC600 to position the Floor Guard
Note: If the DC600 is already mounted, cut out the outline of the DC600 from the

2. http://www.symbol.com/manuals

configuration and location options. The document is available at:

1. Refer to the DC600 Integrator Guide (P/N 72E-71772-0X) for information on DC600

Revision A — September 2005
72-74679-01

http://www.symbol.com/manuals

For the latest version of this guide and other supporting documentation, go to:

[phone]
Contact local distributor or call

[phone] Outside US
1-800-347-0178 Inside US

Inside Spain 91 324 40 00

To install the optional floor guard:

template and fit the template around the DC600 to position the Floor Guard mounting holes.
Note: If the DC600 is already mounted, cut out the outline of the DC600 from the mounting

Mounting Instructions and Mounting Template
Quick Reference Guide,

Canada 905-629-7226

1-631-738-2400

DC600 Floor Guard

provide for accurate positioning of the DC600 Floor Guard.
The DC600 Floor Guard QRG provides printed a full size mounting template (in the box) to

Floor Guard Installation

Distributor Operations
Europe/Mid-East

Sales Support
Latin America

Sweden/Sverige 08 445 29 00 Outside Spain [phone]

South Africa 11-809 5311 Spain/España
Netherlands/Nederland 315-271700 Norway/Norge [phone]
Italy/Italia 2-484441 Mexico/México 5-520-1835
France 01-40-96-52-21 Germany/Deutschland 6074-49020
Denmark/Danmark 7020-1718 Finland/Suomi 9 5407 580
Australia 1-800-672-906 Austria/Österreich 01-5055794-0
United Kingdom 0800 328 2424 Asia/Pacific [phone]

United States 1-800-653-5350

the Symbol Support Center:
or Systems Support representative. If there is a problem with the equipment, they will contact
required applications. If a problem occurs using the equipment, contact the facility Technical
Before using the unit, it must be configured to operate in the facility network and run the

Service Information

Open For Positioning Template

Using the Mounting Template

1. Refer to the DC600 Integrator Guide (P/N 72E-71772-0X) for information on
DC600 configuration and location options. The document is available at:

http://www.symbol.com/manuals

Note: If the DC600 is already mounted, cut out the outline of the DC600 from the
mounting template and fit the template around the DC600 to position the Floor
Guard mounting holes.

2. Position the DC600 Mounting Template under the DC600 and line up the DC600
mounting holes with the mounting holes on the mounting template. The
mounting template shows the position of the Floor Guard two right hand
mounting holes.

0.0 in. 1.8 in. 3.0 in. 6.0 in.

3. Use the mounting template to locate the DC600 Floor Guard directly over the
mounting template locating holes.

4. Use the Floor Guard to mark the mounting hole locations on the floor

5. Remove the DC600 Floor Guard and prepare the floor for mounting as applicable
for the floor material.

6. Replace the DC600 Floor Guard and attach with fasteners appropriate for the

floor material.