The copyrights in this manual and the software and/or firmware and hardware described therein are owned by Zebra
Technologies (Zebra). Unauthorized reproduction of this manual or the software and/or firm wa re may resul t in
imprisonment of up to one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators may be subject to
civil liability.
ZEBRA and the Zebra logo are registered trademarks of ZIH Corp.
All other brand names, product names, or trademarks belong to their respective holders.
Proprietary Statement/Use
This document contains proprietary information of Zebra which may not be used, reproduced, or
disclosed to any other parties for any other purpose without the express, written permission of Zebra.
This document has been made available as part of the license that has been granted to an authorized
user of Zebra software. It is intended solely for the information and use of parties operating and
maintaining the equipment des c ribed here in. Use of this documentation is subject to the terms and
limitations of that license agreement. This document describes all functionality that can be licensed for
this product. Not all functionality described in this document may be available to you depending on your
license agreement. If you are not aware of the relevant terms of your license agreement, contact sales at
Zebra.
Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to
change without no tic e.
Liability Disclaimer
Zebra takes steps to ensure that its published documentation is correct; however, errors do occur. Zebra
reserves the right to correct any such errors and disclaims liability resulting there from.
Limitation of Liability
In no event shall Zebra , any of its licensors or anyone else involved in the creation, production, or
delivery of the accompanying product (including hardware and software) be liable for any of the following
(collectively referred to as "Injuries"): injuries (including death) or damages to persons or to property, or
damages of any other kind, direct, indirect, special, exemplary, incidental or consequential, including, but
not limited to, loss of use, lost profits, lost revenues, loss of data, business interruption, replacement
costs, debt service or rental payments, or damages owing by you to others, whether arising out of
contract, tort, strict liability or otherwise, arising from or relating to the design, use (or inability to use) or
operation of these materials, the software, documentation, hardware, or from any services provided by
Zebra (whether or not Zebra or its licensors knew or should have known of the possibility of any such
Injuries) even if a remedy set forth herein is found to have failed of its essential purpose. Some
jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
2 D1844 Rev E August 2013
_____________
____________
____________
_____________
____________
Note
____________
Users Manual, Dart Vision Reader, UWD-1000
Typographical Conventions
Warnings call attention to a procedure or practice that could result in
personal injury if not correctly performed. Do not proceed until you fully
understand and meet the required conditions.
Cautions call attention to an operation procedure or practice that could
damage the product, or degrade performance if not correctly performed.
Do not proceed until understanding and meeting these required
conditions.
Notes provide information that can be helpful in understanding the
operation of the product.
4.4NETWORK AND POWER OPTIONS .......................................................................................................................... 14
6.6FIRMWARE UPGRADE PROCESS ............................................................................................................................. 54
6.7READ RANGE ..................................................................................................................................................... 57
7. OUTPUT DATA DESCRIPTION .......................................................................................................................... 63
8. REGULATORY COMPLIANCE INFORMATION ................................................................................................... 67
9. REGULATORY COMPLIANCE INFORMATION WLM54AG MODULE ................................................................... 68
APPENDIX A ......................................................................................................................................................... 70
APPENDIX B ......................................................................................................................................................... 74
APPENDIX C ......................................................................................................................................................... 80
REFERENCE:ISO24730-1 FIELD DEFINITIONS AND DESCRIPTIONS......................................................................................... 80
REFERENCE:ZEBRA FIELD DEFINITIONS AND DESCRIPTIONS USED BY Z-SLMP .......................................................................... 81
IGURE 2:DVRCONNECTIONS (NOTE:RJ-45BACK SHELLS REMOVED IN FIGURE) ..................................................................... 13
F
IGURE 3:NETWORK AND POWER ..................................................................................................................................... 14
IGURE 6:SSHMAIN MENU ............................................................................................................................................. 18
F
IGURE 7:MAIN MENU .................................................................................................................................................... 24
IGURE 10:MAIN MENU COUNTRY CODE ........................................................................................................................... 26
F
IGURE 11:MANUFACTURING MENU ................................................................................................................................. 27
F
IGURE 12:COUNTRY CODE LIST ........................................................................................................................................ 27
F
IGURE 13:SET COUNTRY CODE ......................................................................................................................................... 28
IGURE 15:ANTENNA TYPE ............................................................................................................................................... 29
IGURE 17:ADVANCE MENU ............................................................................................................................................. 31
IGURE 19:802.11CLIENT MENU ..................................................................................................................................... 32
F
IGURE 20:WPA_SUPPLICANT AT BOOT ............................................................................................................................ 33
IGURE 24:CERTIFICATE DATA ........................................................................................................................................... 40
F
IGURE 25:SET VALID DATE .............................................................................................................................................. 41
IGURE 28:FIRMWARE UPGRADE MAIN MENU .................................................................................................................... 54
F
IGURE 29:FIRMWARE UPGRADE MENU ............................................................................................................................. 54
IGURE 33:FIRMWARE UPGRADE SERIAL ............................................................................................................................. 56
F
IGURE 34:READ RANGE MAIN MENU ............................................................................................................................... 57
F
IGURE 35:READ RANGE MENU ........................................................................................................................................ 58
F
IGURE 36:READ RANGE DIRECT ENTRY .............................................................................................................................. 58
F
IGURE 37:READ RANGE VALUE ........................................................................................................................................ 59
F
IGURE 38:READ RANGE INCREMENT/DECREMENT .............................................................................................................. 59
F
IGURE 39:READ RANGE SAVE .......................................................................................................................................... 60
F
IGURE 40:FINE READ RANGE ........................................................................................................................................... 60
F
IGURE 41:READ RANGE FINE SET ..................................................................................................................................... 61
F
IGURE 42:READ RANGE FINE SAVE ................................................................................................................................... 61
F
IGURE 43:READ RANGE COURSE DISTANCE ........................................................................................................................ 62
F
IGURE 44:READ RANGE FINE DISTANCE ............................................................................................................................. 62
IGURE 46:INSTALLATION TO HORIZONTAL METAL STRUT....................................................................................................... 70
F
IGURE 47:VERTICAL MOUNTING TO METAL STRUT ............................................................................................................... 70
IGURE 49:REMOVAL OF TWO NUTS PRIOR TO INSTALLATION ................................................................................................. 71
F
5 D1844 Rev E August 2013
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.