Zanussi ZWF1460S User Manual

WASHING MACHINE
ZWF 1240 W - ZWF 1440 W
ZWF 1640 W - ZWF 1640 S
White Cottons
Coloured Cottons
Synthetics
Handwash
Silk
Mini 30
E-Synthetics
Wool
E-Cottons
1
2
0
0
9
0
0
5
0
0
9
0
°
6
0
°
5
0
°
4
0
°
7
0
0
ZWF 1240 W
40° AA
Temp.
Spin
Prewash
Wash
Rinse
Spin
End
Rinse
Drain
Spin
Delicate Spin
Prewash
Extra Quick
Super Rinse
Easy Iron
Delay Start
Start/ Pause
3
0
°
TIMELINE 1200
JETSYSTEM 6 kg
INSTRUCTION BOOKLET
132989251
GB
Quick Installation Guide:
visit our WEB SITE to view an install video
www.video.uk.electrolux.com
2
Installation
This appliance is heavy. Care should be taken when moving it.
It is dangerous to alter the specifications or attempt to modify this product in any way.
All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.
Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
Child Safety
This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.
Pets and children have been known to climb into washing machines. Please check your drum before use.
The glass door becomes very hot during the washing cycle. Keep children away from the vicinity of the appliance whilst it is in operation.
Keep all packaging well away from children.
Keep all detergents in a safe place out of children’s reach.
Use
Always unplug the appliance and turn off the water supply after use.
Do not overload the appliance. See relevant section in the instruction book.
Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes.
Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.
Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.
Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.
As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.
Leave the porthole door slightly ajar between washes to preserve the door seal.
Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
3
Contents
For the User
Important Safety Information
2
Your New Washing Machine
4
Description of the Appliance
5 Detergent dispenser drawer 5 Child safety feature 5
The Control Panel
6-9
Operating sequence
10-12 Load the laundry 10 Measure out the detergent 10 Measure out the fabric softener 10 Switch the machine on 10 Select the desired programme 10 Select the temperature 10 Select the spin speed or the RINSE HOLD option 11 Select the desired options 11 Select the DELAY START 11 Start the programme 11 How to change a programme during its cycle 11 How to interrupt a programme during its cycle 11 How to cancel a programme during its cycle 12 How to open the door during the cycle of a programme 12 End of programme 12
Washing Hints
13-14
Which detergent?.... 14
And in which form? 14
Wash Care Symbols
15
Washing Programmes
16-17
Maintenance and Cleaning
18-19 Descaling 18 After each wash 18 Maintenance Wash 18 External cleaning 18 Cleaning the dispenser drawer 18 Cleaning the drawer recess 18 Cleaning the pump 18-19 Cleaning the water inlet filter 19 The dangers of freezing 19 Emergency emptying out 20
Something Not Working
21-22
Service and Spare Parts
22
Guarantee Conditions
23
For the Installer
Installation Instructions
24
Technical Specifications
24
Unpacking 25 Positioning 25 Installation on a suspended floor 25 Water inlet 26 Water drainage 26-27 Levelling 27 Special conditions 27 In the interest of the environment 28 Electrical connection 28 Permanent connection 29
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions Hints and tips Environmental information
4
Your New Washing Machine
Your new washing machine, which is fitted with the New Jet System, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.
Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric.
Automatic cooling of the wash water to 60°C
before draining, with the 90°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.
The special wool programme with its new delicate wash system treats your woollens with extreme care.
The balance control device ensures that the washing machine remains stable when spinning.
Ecological hints
To save water and energy and help protect the environment, we recommend that you follow these hints:
Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).
The machine works more economically if it is fully loaded.
With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.
Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed.
In the interest of the environment
Materials marked with the symbol are recyclable.
Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.
When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.
Help to keep your country tidy - use authorised disposal sites for your old appliance.
How do we help to protect the environment? We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed “Something Not Working”.
5
Description of the Appliance
1 Detergent dispenser drawer
2 Control panel
3 Door opening handle
4 Drain pump
5 Adjustable feet
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
Child safety feature
This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical.
5
4
1 2
3
White Cottons
Coloured Cottons
Synthetics
Delicates
Handwash
Silk
Mini 30
E-Synthetics
Wool
E-Cottons
1
20
0
9
0
0
5
00
9
0
°
60
°
50
°
4
0
°
7
00
ZWF 1240 W
40° AA
Temp.
Spin
Prewash
Wash
Rinse
Spin
End
Rinse
Drain
Spin
Delicate Spin
Prewash
Extra Quick
Super Rinse
Easy Iron
Delay Start
Start/ Pause
3
0
°
TIMELINE 1200
JETSYSTEM 6 kg
P1206
P1131
1 Programme selelector dial
The selector dial is divided into following sections:
• Cotton, linen
• Synthetics
• Delicates, handwash, wool, silk and mini­programme, rinses, drain, spin and delicate spin
The selector dial can be turned either clockwise or anticlockwise.
Position E-Cottons corresponds to the ENERGY SAVING programme for cotton and position O to Reset programme/Switching OFF of the machine. At the end of the programme the selector dial must be turned to position O, to switch the machine OFF.
2 TEMPERATURE button
“Temp.”
Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine. Maximum temperatures are 90°C for white cotton, 60°C for coloured cotton and synthetic fabrics, 40°C for delicate fabrics, wool and fabrics to be hand-washed, 30°C for silk and «Miniprogramme».
White Cottons
Coloured Cottons
Synthetics
Delicates
Handwash
Silk
Mini 30
E-Synthetics
Wool
E-Cottons
40° AA
Rinse
Drain
Spin
Delicate Spin
6
The Control Panel
1200
900
500
90
°
60
°
50
°
40
°
700
ZWF 1240 W
40° AA
Tem p.
Spin
Prewash
Wash
Rinse
Spin
End
Rinse
Drain
Spin
Delicate Spin
Prewash
Extra Quick
Super Rinse
Easy Iron
Delay
Start
Start/ Pause
30
°
White Cottons
Coloured Cottons
Synthetics
Delicates
Handwash
Silk
Mini 30
E-Synthetics
Wool
E-Cottons
1
23 4
8
65
7
3 Spin speed button “Spin”
Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up. Maximum speeds are:
• for cotton: 1200 rpm for model ZWF 1240 W; 1400 rpm for model ZWF 1440 W; 1600 rpm for models ZWF 1640 W and ZWF 1640 S;
• for synthetic, wool, and fabrics to be handwashed:
900 rpm
• for delicate, silk fabrics, miniprogramme:
700 rpm
Rinse hold position : when you choose this option, the machine will not drain the water of the last rinse, so as not to crease the laundry.
At the end of the cycle, the light of the START/PAUSE button goes off, the light and the “End” pilot light remain lit, a flashing zero appears on the display, to indicate that the water must be drained.
There are 2 possibilities to empty out water:
• Select programme “Drain”:
The water is emptied out without spinning.
• Select programme “Spin” or “Delicate Spin”. Select
the spin speed by means of the relevant button and then depress the START/PAUSE button. The water is emptied out and the laundry is spun at the selected spin speed.
Attention! Before selecting “Drain”, the “Spin” or the “Delicate Spin” programme the selector dial has to be positioned on O (cancelling).
7
4 OPTION buttons
Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the START/PAUSE button. When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out. If an incorrect option is selected, the pilot lights flash for about 2 seconds and the message Err is displayed. Press these buttons to select the following options:
PREWASH: select this option if you wish your laundry
to be prewashed before the main wash (not available for wool and handwash cycle, miniprogram and silk).
The Prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained.
EXTRA QUICK: this option can be used for lightly
soiled (not for wool, hand wash, silk and miniprogramme) in order to obtain a good washing programme in a short time. The washing time will be reduced according to the type of fabric and the selected temperature.
“Extra Quick” cannot be used with E-Cottons, 40°
AA, E-Synthetics programmes.
SUPER RINSE: this option can be selected with all
programmes, except the wool programme and handwash. The machine will add 2 rinses for cottons and 1 rinse for synthetics, delicates and silk.
This option is recommended for people who are allergic
to detergents, and in areas where the water is very soft.
EASY IRON: selecting this button the laundry is
gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform 6 rinses instead of 3 for cotton and 4 rinses instead of 3 for synthetics. This function can be used for cotton and synthetic fabrics.
If this option is selected for cotton programmes, the spin speed automaticaly will reduce to 900 rpm.
If this option is selected for synthetic programmes with a temperature of 60°C or 50°C, the machine will perform a washing cycle at max 40°C.
5 DELAY START button
The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 23 hours by means of this button.
Selecting the delayed start
• Select the programme and the required options.
• Select the delay start.
• Depress START/PAUSE button: the machine starts its
hourly countdown. The programme will start after the selected delay has expired. DELAY START cannot be used with “Drain”, “Spin” or “Delicate spin”
.
Cancelling the delayed start
• Depress START/PAUSE button.
• Depress DELAY START button until “0’”is displayed.
• Depress START/PAUSE button again.
6 DISPLAY
The display shows the following information:
Duration of the programme - Delayed start ­Incorrect option selection - Alarm code - End of programme.
After selecting a programme, the duration is displayed in hours and minutes ( for example 2.05).
The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.
After the programme has started, the time remaining is updated every minute.
Duration of the selected programme
8
The selected delay (23 hours max) set by means of the relevant button appears on the display for 3 seconds, then the duration of the previously selected programme is displayed.
The countdown is updated every hour and when remain the last 2 hours each 30 min.
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed for 2 seconds.
In the event of operating problems, some alarm codes can be displayed, for example E20 (see paragraph “Something not working”).
Alarm codes
Incorrect option selection
Delayed start
When the programme has finished a flashing zero is displayed.
7 START/PAUSE button
This button has two functions: Start - Pause.
Start:
After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing.
If you have selected the delayed start, the machine begins its countdown. The duration of the programme or the delay appears on the display.
Pause
To interrupt a programme which is running, depress the Start/Pause button: the corresponding pilot light starts start to flash.
To restart the programme from the point at which it was interrupted, press the START/PAUSE button again.
Start/ Pause
End of programme
9
8 Programme phase indicator
lights
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.
After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.
At the end of the programme the “End” pilot light illuminates.
The “End” pilot light flashes in the event of operating problems. And the relative alarm code appears on the display.
EE1100
= the machine does not fill
EE2200
= the machine does not empty
EE4400
= the door has not been closed
To eliminate the problem, see paragraph “Something not working”.
Programme information
With this programme it is possible to rinse and spin cotton garments which have been washed by hand. The machine performs 3 rinses, followed by a final spin at maximum speed. The spin speed can be reduced by depressing “Spin” button. The final spin is foreseen only for cotton items as in the spin programme.
For emptying out the water of the last rinse in programmes with the Rinse hold
.
Turn first the programme selector dial to O, then select programme “Drain” and depress the START/PAUSE button.
Drain
Rinse
Prewash
Wash
Rinse
Spin
End
Separate long spin at max.speed for hand washed garments. Use this for cotton items. You can reduce the speed by means of “Spin” button to adapt it to the fabrics to be spun.
Separate short spin at 700 rpm for hand washed garments. Use this for synthetic, delicate, wool/handwashed, silk items. You can reduce the speed by means of “Spin” button to adapt it to the fabrics to be spun (only in the model ZWF 1240 W).
This is a complete programme that can be combined with the following options: spin speed reduction (only in the model ZWF 1240 W), rinse hold and delayed start.
To be used for laundry which is lightly soiled or which needs freshening up. Max load 3 kg; Washing temperature 30°C Programme duration 30 minutes Final spin speed 700 r.p.m.
To reset a programme and to switch off the machine turn the selector dial to O. Now a new programme can be selected.
O = Cancelling/OFF
Mini 30’
Delicate Spin
Spin
1010
Operating Sequence
Before the first wash we recommend to run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
1.Load the laundry
Open the door by carefully pulling the door handle outwards..
Place the laundry in the drum, one item at a time, shaking them out as much as possible.
Close the door.
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment .
If you wish to carry out the prewash, pour detergent into the appropriate compartment marked .
3.Measure out the fabric softener
If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.
Close the drawer gently.
P1195
P1194
P0004
4. Switch the machine on
Turn the selector dial to the desired programme to switch the appliance on. To switch the appliance off turn it to O.
5. Select the desired programme
Turn the selector dial to the desired position: the lights corresponding to the different phases making up the selected programme illuminate.
The duration of the programme appears in the display.
6. Select the temperature
Press the “Temp.” button if you wish to select a temperature value different from the one proposed by the washing machine. The relevant light will light up.
90
°
60
°
50
°
40
°
Tem p.
30
°
Prewash
Wash
Rinse
Spin
End
White Cottons
Coloured Cottons
Synthetics
Delicates
Handwash
Silk
Mini 30
E-Synthetics
Wool
E-Cottons
40° AA
Rinse
Drain
Spin
Delicate Spin
White Cottons
Coloured Cottons
Synthetics
Delicates
Handwash
Silk
Mini 30
E-Synthetics
Wool
E-Cottons
40° AA
Rinse
Drain
Spin
Delicate Spin
Loading...
+ 21 hidden pages