English
Important Safety Information
These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
Installation
• It is mandatory that all operations required for the
installation are carried out by a qualified or competent
person, in accordance with existing rules and
regulations.
• It is dangerous to alter the specification in any way.
• Once you removed all packaging from the appliance,
ensure that it is not damaged and the electric cable is
in perfect conditions. Otherwise, contact your dealer
before proceeding with the installation.
Child Safety
• This appliance has been designed to be operated by
adults and children under supervision. Young children
MUST NOT be allowed to tamper with the controls or play
near or with the oven.
• Accessible parts of this appliance may become hot
when it is in use. Children should be KEPT AWAY until it
has cooled.
During use
• This appliance has been designed for cooking edible
foodstuff only and MUST NOT be used for any other
purposes.
• Ensure that all control knobs are in the OFF position
when not in use.
• Should you connect any electrical tool to a plug near
this cooking appliance, ensure that electric cables are
not in contact with it and keep them far enough from
the heated parts of this appliance.
• If the appliance is out of order, disconnect it from the
electric supply.
• Do not leave untensils containing foodstuffs, e. g. fat
or oil in or on the appliance. This could cause damage
in case the appliance is inadvertently switched on.
• Always place the dripping pan in position to collect fat
when using the grill or when cooking meat. Pour a little
water into the dripping pan to avoid smoke and
unpleasant smells.
• Appliances become very hot with use, and retain their
heat for long periods after use. Care should be taken
to avoid touching heating elements inside the oven.
• Always stand back from the oven when opening
the oven door during cooking or at the end of it
to allow any build up of steam or heat to release.
• Never use steam or high pressure steam cleaners to
clean the appliance.
• Disconnect the appliance from the electrical supply,
before carrying out any cleaning or manteinance work.
• Some parts of the appliance are covered by a shockproof plastic film. Remove this film before using the
oven.
• This appliance is meant to operate with a singlephased connection to 230 V electrical supply. An
eventual 400 V poliphasic connection without earth
wire will destroy the oven and the hob, if fitted.
• The manufacturer disclaims any responsability
should all the safety measures not be carried out.
Service
• Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
Environmental Information
• After installation, please dispose of the packaging with
due regard to safety and the environment.
• When disposing of an old appliance, make it unusable,
by cutting off the cable.
•
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where
you purchased the product.
Guide to Use the instructions
The following symbols will be found in the text to guide you
throughout the Instructions:
Safety Instructions
• Always use oven gloves to remove pans from the oven.
• For hygiene and safety reasons, this appliance should
be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.
)
Step by step instructions for an operation
Hints and Tips
Environmental information
3
Contents
For the User For the Installer
Important Safety Information 3
Description of the Oven 4
When the oven is first installed 6
Electronic programmer 7
Using the Oven 9
Cooking Tables 11
Cleaning and Maintenance 13
Something not working... 16
Technical Assistance 17
Technical Data 17
Installation 18
Electrical connection 19
It is most important that this instruction book
is be retained with the appliance for future
reference. Should the appliance be sold or
transferred, always ensure that the book is left
with the appliance in order that the new
owner can get to know the functions of the
appliance and the relevant warnings.
MANUFACTURER:
ELECTROLUX HOME PRODUCTS ITALY S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italy)
Description of the Oven
354
2 6
10
11
1
7
8
9
1. Control panel
2. Thermostat Control Knob
3. Thermostat Control Light
4. Electronic Programmer
5. Oven Control Function Knob
6. Mains on Light
7. Grill
8. Oven Light
7. Telescopic runners
10.Oven Fan
11. Rating Plate
4
Controls
Oven function control knob (Fig. 1)
The oven function control knob can have the following
symbols and functions:
Oven Light - The oven light will be on
without any cooking function
Conventional cooking - The heat comes
from both the top and bottom element,
ensuring even heating inside the oven.
Top heating element - The heat comes
from the top of the oven only.
Bottom heating element - The heat
comes from the bottom of the oven only.
Inner grill element only - can be used for
grilling small quantities.
Double Grill - The full grill element will be
on.
Thermal Grilling - This function offers an
alternative method of cooking food items,
normally associated with conventional
grilling. The grill element and the oven fan
operate together, circulating hot air around
the food. When using this function,
select a maximum temperature of
200°C.
Fan cooking - This allows you to roast or
roast and bake simoultaneously using any
shelf, without flavour transference.
Fig. 1
Defrost Setting - This setting is intended
to assist in thawing of frozen food.
Thermostat control knob (Fig. 2)
Turn the thermostat control knob to select temperatures
between 50°C and MAX (230°C).
Oven control light (I)
It will come on every time an heating element is set on
operation.
Thermostat control light (°C)
Once the oven temperature has been selected, the
temperature light will come on and remain on until the
oven has reached the correct setting; after that, it will go
on and off with the thermostat, showing how the temperature is being maintained.
50
MAX
100
200
150
Fig. 2
5
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Zanussi
Service Centre. Under no circumstances should you
attempt to repair the appliance yourself.
The cooling fan
The cooling fan is designed to cool the walls of the oven
and the components of the oven itself.
The fan switches on automatically after a few minutes of
cooking. Warm air is blown out through the aperture near
the oven door handle. When the oven is switched off, the
fan will remain on in order to cool the oven and kitchen
cabinets properly, after which it switches off automatically.
NOTE: The fan may run up to 45 minutes after cooking
has been completed. Leaving the door ajar will lessen
the cooling time.
Fig. 3
FO 2259
When the oven is first installed
The oven will work only if the time of day has
been set with the electronic programmer.
Before cooking for the first time, carefully wash
the oven accessories.
Once the oven has been installed:
)
a) set the thermostat knob to MAX (230 °C);
b) switch the oven function control knob to conventional
cooking ( );
c) allow the oven to run empty for approximately 45
minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may be emitted.
This is absolutely normal, and is caused by residues of
manufacturing.
Repeat this operation for the grill and fan cooking function.
Once this operation is carried out, let the oven cool down,
then clean the oven cavity with a soft cloth soaked in warm
soapy water.
Fig. 4
FO 2161
To open the oven door, always catch the
handle in its central part (Fig. 4).
6