Zanussi ZDV 12001 User Manual
EN
User manual
Dishwasher
ZDV 12001
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 3
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4
Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4
Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Technical information _ _ _ _ _ _ _ _ _ _ _ _ 12
Environment concerns _ _ _ _ _ _ _ _ _ _ _ 13
Subject to change without notice.
Safety information
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible if an incorrect
installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
Children and vulnerable people safety
Warning! Risk of suffocation, injury or
permanent disability.
• Do not let persons, children included, with
reduced physical sensory, reduced mental
functions or lack of experience and knowledge use the appliance. They must have supervision or instruction for the operation of
the appliance by a person who is responsible
for their safety. Do not let children play with
the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the appliance door when it is open.
Installation
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not install or use the appliance where the
temperature is less than 0 °C.
• Obey the installation instruction supplied
with the appliance.
• Make sure that the appliance is installed below and adjacent to safe structures.
Water connection
• Make sure not to cause damage to the water
hoses.
• Use only new hoses to connect the appliance to the water supply. Do not use old hoses again.
• Before you connect the appliance to new
pipes or pipes not used for a long time, let
the water flow until it is clean.
• The first time you use the appliance, make
sure that there is no leakage.
Electrical connection
Warning! Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information on
the rating plate agrees with the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof
socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains
plug and to the mains cable. Contact the
service or an electrician to change a damaged mains cable.
• Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
• Only for UK and Ireland. The appliance
has a 13 amp mains plug. If it is necessary to
2
www.zanussi.com
change the fuse in the mains plug, use a 13
amp ASTA (BS 1362) fuse.
Use
• This appliance is intended to be used in
household and similar applications such as:
– Staff kitchen areas in shops, offices and
other working environments
– Farm houses
– By clients in hotels, motels and other resi-
dential type environments
– Bed and breakfast type environments.
Warning! Risk of injury.
• Do not change the specification of this appliance.
• Put knives and cutlery with sharp points in
the cutlery basket with the points down or in
a horizontal position.
• Do not keep the appliance door open without
supervision to prevent to fall on it.
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous. Obey
the safety instructions on the detergent
packaging.
• Do not drink and play with the water in the
appliance.
• Do not remove the dishes from the appliance
until the programme is completed. There can
be detergent on the dishes.
Warning! Risk of electrical shock, fire or
burns.
• Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.
• Do not use water spray and steam to clean
the appliance.
• The appliance can release hot steam if you
open the door while a programme operates.
Disposal
Warning! Risk of injury or suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and dispose of it.
• Remove the door catch to prevent children
and pets to get closed in the appliance.
Customer Care and Service
Contact the Service to repair the appliance.
We recommend only the use of original spare
parts.
When you contact the Service, ensure that you
have the following information that is available
on the rating plate.
Model :
PNC :
Serial Number :
Product description
1
2
3
4
9
8
6
7
5
1
Lower spray arm
2
Filters
3
Rating plate
4
Rinse aid dispenser
5
Detergent dispenser
6
Salt container
7
Water hardness dial
8
Upper spray arm
9
Upper basket
3
www.zanussi.com
Control panel
B
A
2
1
3
4
1
On/off button
2
Programme indicators
3
Indicators
4
Programme button.
Indicators Description
End indicator.
Salt indicator. This indicator is off while the programme operates.
Programmes
Programme
1)
Degree of soil
Type of load
Programme pha-
ses
Duration
(min)
Energy
(kWh)
Water
(l)
Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
65 - 75 1,5 - 1,7 18 - 20
Normal soil
Crockery and cutlery
Wash 65 °C
Rinses
Dry
100 - 110 1,4 - 1,5 18 - 20
2)
Fresh soil
Crockery and cutlery
Wash 65 °C
Rinse
30 0,8 8
3)
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
120 - 130 0,8 - 0,9 12 - 13
4)
All Prewash 11 0,1 5
1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of
dishes can change the programme duration and the consumption values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test
information.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and
bad odours to come out from the appliance.
Do not use detergent with this programme.
4
www.zanussi.com
Options
Acoustic signals
The acoustic signals operate in these conditions:
• When the programme is completed.
• A malfunction occurs to the appliance.
Factory setting: on.
You can deactivate the acoustic signals.
Deactivating the acoustic signals
1. Press the on/off button to activate the appliance.
2. Make sure that the appliance is in setting
mode. Refer to ‘SETTING AND STARTING
A PROGRAMME’.
3. Press and hold the programme button until
the programme indicator (A) flashes and the
programme indicator (B) comes on.
4. Press immediately the programme button.
• The programme indicator (A) comes on
with a fixed light.
• The programme indicator (B) starts to
flash.
5. Wait until the programme indicator (A) goes
off and the end indicator comes on (the
programme indicator (B) continues to flash).
• The acoustic signals are on.
6. Press the programme button. The end indicator goes off.
• The acoustic signals are off.
7. Deactivate the appliance to confirm.
Activating the acoustic signals
1. Refer to ‘Deactivating the acoustic signals’,
step (1) through (4).
2. Wait until the programme indicator (A) goes
off. The end indicator is off and programme
indicator (B) continues to flash.
• The acoustic signals are off.
3. Press the programme button. The end indicator comes on.
• The acoustic signals are on.
4. Deactivate the appliance to confirm.
Before first use
1. Make sure that the set level of the water
softener agrees with the water hardness in
your area. If not, adjust the water softener.
Contact your local water authority to know
the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the appliance. Start a programme to remove them.
Do not use detergent and do not load the
baskets.
Adjusting the water softener
Hard water contains a high quantity of minerals
that can cause damage to the appliance and
bad washing results. The water softener neutralises these minerals.
The dishwasher salt keeps the water softener
clean and in good conditions. Refer to the table
to adjust the water softener to the right level. It
makes sure that the water softener uses the
correct quantity of dishwasher salt and water.
You must adjust the water softener manually and electronically.
5
www.zanussi.com
Loading...