Zanussi ZBM742W, ZBC741R, ZBC981X, ZBM762N USER MANUAL

ENGLISH

WARNINGS AND IMPORTANT ADVICE

These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.

 This appliance has been designed to be operated by

adults and children under supervision. Young children

MUST NOT be allowed to tamper with the controls or play

near or with the oven.

 This appliance has been designed for cooking edible

foodstuff only and MUST NOT be used for any other

purposes.  It is dangerous to alter the specification in any way.  For hygiene and safety reasons, this appliance should

be kept clean at all times. A build-up of fats or other

foodstuff could result in a fire.  Accessible parts of this appliance may become hot

when it is in use. Children should be KEPT AWAY until it

has cooled.  Under no circumstances should you attempt to repair

the appliance yourself. Repairs carried out by

unexperienced persons may cause injury or serious

malfunctioning. Refer to your local Zanussi Service

Centre. Always insist on genuine Zanussi spare parts.  Ensure that all control knobs are in the OFF position

when not in use.  Should you connect any electrical tool to a plug near

this cooking appliance, ensure that electric cables are

not in contact with it and keep them far enough from

the heated parts of this appliance.  If the appliance is out of order, disconnect it from the

electric supply.  Do not leave untensils containing foodstuffs, e. g. fat

or oil in or on the appliance. This could cause damage

in case the appliance is inadvertently switched on.

 Always place the dripping pan in position to

collect fat when using the grill or when cooking

meat. Pour a little water into the dripping pan to

avoid smoke and unpleasant smells.

 Always use oven gloves to remove pans from the

oven.

 It is mandatory that all operations required for the

installation are carried out by a qualified or competent

person, in accordance with existing rules and

regulations.

 Disconnect the appliance from the electrical supply,

before carrying out any cleaning or manteinance work.

 Some parts of the appliance are covered by a shock-

proof plastic film. Remove this film before using the oven.

 Once you removed all packaging from the appliance,

ensure that it is not damaged and the electric cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation.

 This appliance is meant to operate with a single-

phased connection to 230V electrical supply. An eventual 400V poliphasic connection without earth wire will destroy the oven and the hob, if fitted.

 The manufacturer disclaims any responsability

should all the safety measures not be carried out.

Environmental Information

 After installation, please dispose of the packaging with

due regard to safety and the environment.

 When disposing of an old appliance, make it unusable,

by cutting off the cable.

OVEN DOOR PROTECTION DEVICE

All our appliances comply with the European Safety Standards. Nevertheless, in order to ensure the highest safety level, and avoid little children to be exposed to the heat when the appliance is operated, it is possible to fit a special protection device to the oven door. This device can be purchased in our Service Force Centres, specifying the relevant code (35791) and the Product No. shown on the rating plate. Fitting instructions are provided with the kit package.

CONTENTS

Warnings and important advice 46 Using the oven 47 When the oven is first installed 49 End of cooking programmer 49 How to set the electronic timer 50 Cooking with the multifunction oven 51 Cooking tables 52 Using the Grill 53

USING THE OVEN

ZBM 762

- +

Cleaning and Maintenance 54 If something goes wrong 56 Assistance and spare parts 56 Guarantee conditions 57 Technical data 58 To the attention of the installer 58 Electrical connection 59

Electronic Timer

Thermostat Control Light Oven Function Control Knob

ZBM 762 X - ZBM 742

Electronic Timer

Thermostat Control Light Oven Function Control Knob

ZBC 741 - ZBC981

- +

Oven Control Light

Thermostat Control Knob

Thermostat

Control Light

Thermostat Control

Knob

End of Cooking

Programmer

100

150

MAX

200

Oven Function Control

Knob

OVEN FUNCTION CONTROL KNOB (FIG. 1)

Oven Light - The oven light will be on without any cooking function

Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven.

Top heating element - The heat comes from the top of the oven only.

Bottom heating element - The heat comes from the bottom of the oven only.

- Fan cooking - This allows you to roast or roast and bake simoultaneously using any shelf, without flavour transference.

Inner grill element only - can be used for grilling small quantities.

Double Grill - The full grill element will be on. Thermal Grilling - This function offers an alter-

native method of cooking food items, normally associated with conventional grilling. The grill element and the oven fan operate together, circulating hot air around the food.

Fig. 1

FO0347

FO0293

Defrost Setting - This setting is intended to assist in thawing of frozen food.

THERMOSTAT CONTROL KNOB (FIG. 2)

Turn the thermostat control knob clockwise to select temperatures between 50°C and 250°C (MAX).

OVEN CONTROL LIGHT (if present)

This yellow light will come on when the oven function control knob is set on a function.

THERMOSTAT CONTROL LIGHT

Once the oven temperature has been selected, the Themostat Control Light will come on and remain on until the oven has reached the correct setting; after that, it will go on and off with the thermostat, showing how the temperature is being maintained.

THE SAFETY THERMOSTAT

This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequent over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Zanussi Service Centre. Under no circumstances should you attempt to repair the appliance yourself.

MAX

100

200

150

Fig. 2

FO0282

THE COOLING FAN FOR THE CONTROLS

This oven is provided with a cooling fan, meant to keep the front panel, the knobs and the oven door handle cool. This fan may run on after the oven or grill is switched off, until a normal temperature is reached.

CATALYTIC SELF-CLEANING SIDE PANELS (ZBC 741) (accessory available on request)

Catalytic self cleaning panels can be installed onto the sides of the oven. These panels, at normal cooking temperature, can turn the splashes of fat into a light residual powder. This powder must be removed with a damp sponge after the oven has cooled down, in order to keep the catalytic panels in good condition.

All cookings must be carried out with the oven door closed

WHEN THE OVEN IS FIRST INSTALLED

Once the oven has been installed:

a) set the thermostat knob to MAX; b) switch the oven function control knob to

conventional cooking ( );

c) allow the oven to run empty for approximately 45 minutes;

d) open a window for ventilation.

During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing. Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm soapy water.

Before cooking for the first time, carefully wash the shelf and the dripping pan.

To open the oven door, always catch the handle in its central part (Fig. 3).

Fig.3

FO 2161

END OF COOKING TIMER (MOD. ZBC 741 - 981)

SETTING THE TIME OF DAY Push in completely the timer knob and at the same time turn it anti-clockwise, until the clock shows the correct time of day. Then pull the knob outwards to its original position.

MANUAL FUNCTION

Pull the timer knob outwards and at the same time turn it clockwise, until the symbol appears in the timer

window. This setting allows you to operate the oven manually, i. e. without any programme.

AUTOMATIC OPERATION

Pull the timer knob outwards and at the same time turn it clockwise, until the required cooking time is displayed in the timer window. This setting allows you to operate the oven manually, i. e. without any programme. The diagram shows the timer set for 75 minutes of cooking. When the required cooking time is up, the oven will switch off automatically, and an acoustic alarm will sound. To switch the alarm off, pull the timer knob outwards and at the same time turn it clockwise until

symbol is displayed in the timer window.

WINDOW

KNOB

ELECTRONIC TIMER (MOD. ZBM 762 - 742)

Program On

Light

A U

U T

Automatic Operation Light

A button: Minute Minder

Acoustic Signal Off

B button:

Cooking Time

End of Cooking

SETTING THE TIME OF DAY (24 H CLOCK)

Press buttons A and B at the same time and while turning knob E enter the time of day.

- +

MANUAL OPERATION

- +

To set oven for manual operation, press button D.

SETTING THE MINUTE MINDER

Press button A and while turning knob E enter the required time (maximum 23 h 59 min.) After required time has been selected the clock will revert to the time of day. When time is up an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position.

- +

KNOB (E)

D button:

Manual Operation

C button:

COOKING TIME

Press button B and while turning knob E enter the required time. The "AUTO" signal will appear on the right hand side of the clock. Then, select the required temperature and the oven function. When cooking is completed, an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position.

SETTING THE AUTOMATIC TIMER

Press button B and while turning knob E enter the required cooking time. Then press button C and while turning knob E enter the end of cooking time. Turn the thermostat and function control knobs to the required settings. The oven temperature light nor oven light will not come on until the oven switches on. When cooking is completed, the "AUTO" signal will flash an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position.

A U

U T

T O

- +

A U

U T

T O

- +

A U

U T

T O

- +

In case of loss of power, all the settings (time of day, setted programs or programs in operation) will be cancelled. When the power is restored, the numbers on the display will flash, and the timer has to be reset.

+ 9 hidden pages