Yuneec YUNFCAUK Instruction manual

Breeze FPV Controller

EN USER MANUAL

DE BEDIENUNGSANLEITUNG

FR MANUEL D'UTLISATION

IT MANUALE D'USO

CN 使用说明

ES MANUAL DEL USUARIO

INTRODUCTION

Breeze FPV Controller allows users to pilot their Breeze in a new way. The portable Game Controller is connected to the smart device via Bluetooth, and enables users to control the Breeze accurately with physical joysticks and buttons. It is compatible with the Breeze Cam application (Breeze Cam is a remote control application for Breeze) on iOS devices (above iOS 8.0 version) and Android devices (above 4.4 version), so you can use them instead of the touch screen of your smart device to control the Breeze. Meanwhile, it turns your smart device into a display screen, making every moment you shoot look smooth, professional and ready to share. The Breeze FPV Controller features two view modes: FPV Mode and Normal Mode. You can view the images through the FPV Goggles or from your smart device.

OVERVIEW

01 L2: Switch to Mobile Phone Cam

02 L1: Photo/Video Mode Switch

03 R2: Help

04 R1: Take Still Photo/Video Recording

05 Charging port

06 Gimbal Tilt Trim 07 Drone Yaw Trim

16 17

08 Altitude/Throttle Control

09 Yaw/Rudder Control 10 Power Button

11 Roll/Aileron Control

12 Pitch/Elevator Control 13 B: Parameters Hidden 14 Y: GO HOME 15 Start Button: Press the Start Button for 3 seconds to take off Press the Start Button to land/cancel landing during flight

16 Android Mode indicator light 17 Apple Mode indicator light

SPECIFICATIONS

Working Platforms: iOS/Android Working Temperatures: -20~65 Working Humidity: 20~80% Connection Types: Bluetooth Charging Voltage: 3.7~5.2V Charging Time: 2-3H

Charging Current: 1A-2A Working Distance: Approx.7M Battery Capacity: 600mA Product Size: 160 x 104 x59mm Net Weight: 189g

PREPARATIONS

1. CHARGING THE BATTERY

1. Charge under connection state After connecting the charging cable, Power button and ABXY lights flash once/2 seconds, and the lights keep on when fully charged.

2. Charge under sleeping state After connecting the charging cable, the Game Controller turns on and enters current mode, no signal receiving after 1 minute, mode lights turn off. Power button and ABXY lights start flashing, and the lights keep on when fully charged.

3. Low Battery Indication Power button and ABXY lights flash once/second.

NOTICE: The Game Controller enters sleep state after 1-minute disconnection. NOTICE: The Game Controller enters sleep state after 5-minute no action.

USB

GameSir

Battery Warnings:

To charge the LiPo battery, you must only use the included charger. Do not over-discharge the LiPo battery. If at any time the LiPo battery begins to balloon or swell, discontinue charging or discharging immediately. Always terminate all processes if the battery/charger malfunctions. Store the LiPo battery at room temperature and in a dry area for best results. Allow the LiPo battery to cool to ambient/room temperature before recharging. Never charge the LiPo battery unattended at any time.

2. POWERING ON/OFF & CONNECTION PREPARATION

1. Power on: Press Power button for 2 seconds to start the Game Controller.

2. Power off: Press Power button for 5 seconds to power off the Game Controller.

3. Connection Preparation Connection Preparation for iOS platform:

Step 1) Press Y and then Power button for 2 seconds to start the Game Controller. Step 2) The [ ] indicator light flashes.

Connection Preparation for Android Platform:

Step 1) Press the A button and then Power button for 2 seconds to start the controller.

Step 2) The [ ] indicator light flashes. NOTICE: When the [ ] or the [ ] indicator light flashes, the Game Controller enters the “Connection” mode, and the Game Controller is ready to be paired with your smart device via Bluetooth.

3. DOWNLOADING THE BREEZE CAM APPLICATION Download the Breeze Cam application on your smart device, available for free on the App Store and Google Play Store.

+ 12 hidden pages