E10T QUICK START GUIDE V1.0
Introduction and Overview
01 Damping Plate
02 LED Status Indicator
03 RGB Camera Lens
04 Infrared Camera Lens
05 Gimbal
06 5GHz Antenna
07 SD Card Upgrading Port
Specifications
General
Product Name: 3-Axis Gimbal Camera
Model Name: E10T
Dimensions:123*81*140mm
Weight: 370g
Environmental
Operating Temperature Range: -10℃ to 40℃
Camera
Infrared Lens：
Thermal Imaging System:
Uncooled Vanadium (VOx) Microbolometer
Sensitivity (NEdT) : <50 mK
FPA/Digital Video Display Formats: 320 × 256
Pixel Size: 12 μm
Spectral Band: 8 - 14 μm
Exportable Frame Rates: <9Hz(U.S. export restrictions)
Full Frame Rate: 30Hz
Image Formats: JPEG, TIFF
Video Format: MP4
Scene Range (high gain): -25°C to 100°C
Scene Range (low gain): -40°C to 550°C
Point Temperature Measurement: 3*3
NTSC/PAL field switchable: yes
Image Optimization: Support
Digital Image Enhancement: Support
Polarity Control (black hot / White hot)：yes
Color ＆Monochrome Palettes (LUT)：yes
Digital Zoom Range: 1x , 2x , 4x , 8x
Lens: 4.4mm f/1.0
FOV: 50°
Gimbal
Angular Vibration Range: 0.03°
Mount: Detachable
Controllable Range: Tilt: +15°to -90°
Pan: ±360°
Mechanical Range: Tilt: +50°to -140°
Pan: ±360°
Roll: ±50°
RGB Lens:
Sensor: CMOS 1/2.8''
Effective Pixels: 2.13MP
Lens: 23mm f/2.8
FOV: 90°
Video Resolutions: FHD: 1920x1080 30FPS
Photo Formats: JPEG
Video Formats: MP4
Operation Mode: Capture, Record
Exposure Mode: Program AE Mode, Manual Exposure Mode
Exposure Compensation: ±2
Metering Mode: Spot Metering, Center-weighted Metering, Average Metering
Shutter Speed: 1/30 – 1/8000 s
White Balance: Daylight, Cloudy, Auto, Fluorescent,
Incandescent, Sunrise/Sunset
ISO Range: 100-3200
Digital Downlink Distance: 2km
Gimbal Installing
Assembling
Step 1.
Find the arrow printed on the top of the damping plate,
which indicates the correct direction for installation.
Step 2.
Slide the E10T in the indicated direction all the way
into the mounting slot, until the E10T is secured by the
locking clip.
Step 3.
Remove the lens protector.
Step 4.
Insert the Micro SD card.
Disassembling
Step 1.
Find the locking clip which is located in front of the
mounting slot.
Step 2.
Press and hold the locking clip and push the E10T
forward (the direction shown by the arrow).
Binding the E10T
Step 1.
Switch on the ST16S and the H520 aircraft.
Step 2.
Tap the [ ] on the top right corner on the main
interface of ST16S.
Step 3.
Tap the serial number of the E10T when the following
window pops up. (If multiple Yuneec UAS are used,
check the ID number on the side of each camera to
assure correct camera selection/binding).
Step 4.
Using the password “1234567890”, authorize the
camera and tap “OK” to confirm.
NOTICE
If the connection process is delayed, close the pop
up window and then repeat the above steps.
NOTICE
1 Ensure that the firmware of the gimbal has been updated to the latest version.
2 For the latest product information, please check our official website：www.yuneec.com
WARNING
Do not try to repair the E10T gimbal camera.
Do not expose the lens of E10T gimbal camera to extreme light sources.
Do not operate the E10T gimbal camera in the rain or in environments with high humidity.
Do not touch or move the E10T gimbal camera until the initialization process has been completed.
The following special language terms are used throughout the product literature to indicate
various levels
of potential harm when operating this product:
NOTICE Procedures, which if not properly followed, create a possibility of property damage and/or little to no
possibility of injury.
CAUTION Procedures, which if not properly followed, create the probability of property damage and/or a
possibility of serious injury.
WARNING Procedures, which if not properly followed, create the probability of property damage, collateral
damage and/or serious injury or create a high probability of superficial injury.
WARNING
Read the entire instruction manual to become familiar with the features of the product before operating.
Do not use with incompatible components or alter this product in any way outside o the instructions provided by
Yuneec.
Failure to use this product in the intended manner as described in instruction manual can result in damage to the
product, property and/or cause serious injury.
Collection and Processing of Data
Yuneec may collect navigation information such as GPS data to help improve our products.
We may also collect Depth Map information and Infrared Image information from your drone delivered to our
service center for repair and maintenance service or any other service.
We may also collect other information such as device information, server log information, etc. We may also collect
personal information used in registration if you choose to become a registered user and any other information
user provided to Yuneec. We may also collect information which user send to other users, and the recipients and
senders of such information.
We reserve the right to disclose your information if required to do so by law or in the good-faith belief that such
disclosure is needed to comply with applicable laws, for example in response to a court order, judicial subpoena,
warrant or request from government, or otherwise cooperating with government agencies or law enforcement.
We also reserve the right to disclose your information that we believe in good faith is necessary or appropriate to:
(i) protect ourselves or others from fraudulent, unlawful, or abusive activities; (ii) take precautions against potential
liability; (iii) protect the security of the Yuneec Apps embedded into or downloaded onto your drone or any associated
equipment and services; (iv) protect the legal rights of ourselves or any others.
Any information we collected maybe disclosed or transferred to an acquirer, successor or assignee as part of any
potential merger, acquisition, debt financing or other activities that involves transfer of business assets.
We may make the aggregated non-personal information of the users available to third parties for various purposes,
including (i) complying with various report obligations; (ii) marketing efforts; (iii) analyzing product safety; (iv)
understanding and analyzing our users’ interests, habits, usage pattern for certain functionalities, services,
content, etc.
Disclaimer
Yuneec International (China) Co., Ltd. cannot be held liable for any damage, injury or for use of the product in
violation with legal regulations, especially in the following circumstances: Damage and/or injury as well violation
of legal regulations resulting from a failure to comply with the operating instructions or the instructions at
www.yuneec.com, product information, user manual and other legally binding information.
Damage and/or injury as well violation of legal regulations brought about by the influence of alcohol, drugs,
medication or other narcotics which may impact on the concentration of the user.
The same applies to illnesses effecting the concentration of the user(dizziness, tiredness, nausea etc.) or other
factors compromising mental and physical capabilities.
Intentionally caused damage, injury or violation of legal regulations.
Any request for compensation caused by an accident resulting from use of the product.
Damage and/or injury as well as violation of legal regulations caused by use of the product in a no-fly zone,
e.g.next to an airfield, above a motorway or a natural conservation area.
Malfunction of the product caused by retrofitting or replacement with components which did not come from
Yuneec .
Damage and/or injury caused by the use of replica parts (non-original parts).
Damage and/or injury as well as violation of legal regulations caused by incorrect operation or misjudgement.
Damage and/or injury caused by damaged spare parts or not using original Yuneec spare parts.
Damage and/or injury as well as violation of legal regulations caused by ignoring the low voltage battery warning.
Damage and/or injury as well as violation of legal regulations caused by operating the model in a magnetic field
(e.g. high voltage lines, electricity/ transformer stations, radio towers,mobile phone masts etc.), a strong wireless
signal environment, no-fly zones, poor visibility and in the event of vision impairments or other impacts on the pilot
which are left unchecked etc.
Damage and/or injury brought about through a violation of the legal regulations for operating the model, in unsuitable
weather conditions, e.g. rain, wind, snow, hail, storms, hurricanes etc.
Damage and/or injury as well as violation of legal regulations caused by force majeure, e.g. collision, fire,
explosion, flooding, tsunami, landslide, avalanche, earthquake or other forces of nature.
Damage and/or injury as well as violation of legal regulations caused by the illegal or immoral use of the model,
e.g. capturing videos or recording data which infringes upon/harms the privacy of other people.
Damage and/or injury as well as violation of legal regulations caused by incorrect use of the batteries, protection
systems, chargers or aircraft.
Consequential damage caused by the incorrect operation of any kind of system components and accessory parts,
especially memory cards, whereby image or video material from the camera can become defect.
Any non-compliance with legal obligations, personal injury, material damage and environmental damage caused
by use and a failure to comply with the local laws and regulations.
Damage and/or injury as well as violation of legal regulations caused by hazardous use without sufficient practical
experience.
Damage and/or injury as well as violation of legal regulations caused by flying in legally defined no-fly zones.
Further losses which do not fall within the scope of use defined by Yuneec as improper.
This product is designed for both professional use and personal, private use. The national and international laws
and regulations in force as the time of taking off must be adhered to.
Regulation Information
CE Warning Statement
This device meets the EU requirements on the limitation of the general public to electromagnetic fields by way
of health protection.
EU Operation Frequency (The Maximum Transmitted Power)
5G Wifi: 5560-5580MHz (27dBm), 5680-5700MHz (27dBm)
EU Compliance Statement
Hereby, Yuneec International (China) Co., Ltd. declares that this device is in compliance with the essential
requirements and other relevant provisions of the RED Directive 2014/53/EU. The full text of the EU Declaration
of Conformity is available at the following internet address: http://yune.ec/de-downloads.
Please visit the address above and enter into corresponding product page.
Loading...