Page 1
USER MANUAL (ENGLISH)
SYSTEM REQUIREMENTS (Mac)
TABLE OF CONTENTS
1 ....................... . Table of contents
1 ....................... . System requirements (Window
2 ....................... . System requirements (Mac)
2 ........................ T
3 ....................... . Introduction
3 ....................... . Overview
5 ....................... . Getting started
7 ....................... . Default camera settings
7 ....................... . Powering ON and OFF
8 ....................... . Camera modes
s)
Mac OS® X 10.4.11 or later
2.0GHz Intel Core Duo or faster
Minimum 1GB of systemt RAM
8 ....................... . Video
9 ....................... . Photo
9 ....................... .
10 ...................... . CGO1 smartphone FPV app
11 ...................... . Using ST24 to control CGO1
12 ...................... . CGO1 LED Status
14 ...................... . Safety warnings
18 ...................... . Warranty
19 ...................... . About the quickstart manual
SYSTEM REQUIREMENTS (Windows)
Windows XP (Service Pack 2 or later) or Vista
3.2GHz Pentium 4 or faster
Minimum 1GB of system RAM
1
Page 2
SYSTEM REQUIREMENTS (Mac)
Mac OS® X 10.4.11 or later
INTRODUCTION
2.0GHz Intel Core Duo or faster
Minimum 1GB of systemt RAM
TECHNICAL SPECIFICATIONS
Dimensions LxWxH (with lens):
Weight:
Battery:
Working Voltage:
Operating Time Per Charge:
64.10x44.60x43.80mm
72g
1050mAh 1-Cell 3.7V
Li-Po
3.7-4.2V
60min – 90min (based
on Wi-Fi Environment)
developed by Yuneec for small UAVs. The compact and light-
range and low-latency digital Wi-Fi video link, providing users
CGO1 can be remotely controlled by Yuneec FREE iOS and
Android smart phone applications without the use of extra
components. When paired with Yuneec Personal Ground
Stations - ST24 / ST15, CGO1’s video downlink performance
reaches nearly ~1,700 feet!
OVERVIEW
MicroSD HCSD Class 4:
Optical Zoom:
Photo Resolution/Format :
Resolution/FPS Video Recording:
Downlink Resolution/FPS/Latency:
Video Format:
Audio Format:
Internal-Microphone:
Wi-Fi Frequency:
Wi-Fi Power:
Antenna:
Communication Distance:
4GB – 32GB
Fixed focus
2MP
/JPEG
1080p/30FPS
720p/30FPS/200ms
AVI (H.264)
AAC
Included
5.8GHz dual-band
15dB
Ext. -Mushroom Type
~1,700 feet with ST24
2
Page 3
INTRODUCTION
developed by Yuneec for small UAVs. The compact and light-
range and low-latency digital Wi-Fi video link, providing users
CGO1 can be remotely controlled by Yuneec FREE iOS and
Android smart phone applications without the use of extra
components. When paired with Yuneec Personal Ground
Stations - ST24 / ST15, CGO1’s video downlink performance
reaches nearly ~1,700 feet!
OVERVIEW
Shutter
button
Power switch
(Slide toward
the Mode button
to power on)
Mode
button
LED charge status
indicator
3
Page 4
Video/Photo Indicator
Light (Red; Solid for
video mode, Flashing
for photo mode)
Wi-Fi Indicator Light
(Blue; On for Wi-Fi
Inactive
Wi-Fi ON/OFF
Button
Wi-Fi Antenna Socket
Microphone
Micro-B USB Port
(Supports PC connection
and battery charging)
3mm Mounting
Hole
GETTING STARTED
4
Page 5
MicroSD Card
Slot (SD card not
included)
Battery
Mushroom shaped
WiFi Antenna
GETTING STARTED
1. Remove camera door by applying light pressure on the
‘Yuneec’ logo.
3. Insert battery.
4. Replace camera door.
5. Charge battery. The included Li-Po battery comes partially
charged. To charge, connect the included USB cable
to the Micro-B USB port on camera and connect the other
end of the cable to a suitable USB power source such as a
computer.
Charger Indicator Light when camera is OFF while
charging:
- Charger Indicator Light is pink when charging.
2. Insert a MicroSD card into the card slot with the label
facing forward toward the front of the camera.
- Charger Indicator Light is blue when charging is complete.
5
Page 6
Step1
DEFAULT CAMERA SETTINGS
Step 2
The CGO1 Camera powers on with following default
settings:
Video Resolution: 1080p 30fps
Photo Resolution: 2MP (Megapixels)
Wi-Fi: ON
Video MODE: ON
Photo MODE: OFF
POWERING ON AND OFF
3. Insert battery.
4. Replace camera door.
5. Charge battery. The included Li-Po battery comes partially
charged. To charge, connect the included USB cable
to the Micro-B USB port on camera and connect the other
end of the cable to a suitable USB power source such as a
computer.
Charger Indicator Light when camera is OFF while
charging:
- Charger Indicator Light is pink when charging.
- Charger Indicator Light is blue when charging is complete.
To Power ON:
Slide the Power Switch to the right toward the MODE Button.
The red Video/Photo Indicator Light and blue Wi-Fi
Notice:
mend pressing and holding the SHUTTER Button
for 2 seconds until the Video/Photo and Wi-Fi
6
Page 7
DEFAULT CAMERA SETTINGS
The CGO1 Camera powers on with following default
settings:
Video Resolution: 1080p 30fps
Photo Resolution: 2MP (Megapixels)
Wi-Fi: ON
Video MODE: ON
Photo MODE: OFF
POWERING ON AND OFF
To Power OFF:
Slide the Power Switch to the left, away from the MODE
Warning Indicators:
Low Battery:
simultaneously.
MicroSD Card Full or MicroSD Card Problem: Video/Photo
CGO1 CAMERA MODES
To Power ON:
Slide the Power Switch to the right toward the MODE Button.
The red Video/Photo Indicator Light and blue Wi-Fi
Notice:
mend pressing and holding the SHUTTER Button
for 2 seconds until the Video/Photo and Wi-Fi
7
Page 8
.
To Power OFF:
Slide the Power Switch to the left, away from the MODE
Warning Indicators:
Low Battery:
simultaneously.
MicroSD Card Full or MicroSD Card Problem: Video/Photo
CGO1 CAMERA MODES
Video:
Once you power on your CGO1, the camera defaults to
Video Mode. The red Video/Photo Indicator Light will glow
solid red.
To Start Recording:
Press and release the SHUTTER BUTTON. The red Video/Photo
I
To Stop Recording:
Press and release SHUTTER BUTTON. The red Video/Photo
8
Page 9
Indicator Light will glow solid red, indicating CGO1 is no
button to switch on the CGO1.
.
longer recording and is in Video Mode.
3. Double click ‘My Computer’, locate and double click
‘Removable Disk’.
Photo:
In the Video Mode, press and release MODE BUTTON to enter
4. Double click ‘DCIM’ folder icon to view all Photo and
Video
indicating CGO1 is in Photo Mode.
On a Mac:
To Take a Photo:
Press and release SHUTTER BUTTON. The Video/Photo
Indicator Light will glow solid red for a moment. Repeat this
action for more photos.
1. Connect the CGO1 to the Mac using the included USB
cable.
2. Slide the power switch to the right toward the MODE
button to switch on the CGO1.
3. Icon will appear on desktop. Double click the icon to view
IMPORTANT NOTE:
remove the MicroSD card. Removing the MicroSD card prior to
TRANSFERRING FILES
computer:
On a PC:
1. Connect CGO1 to the computer using the included USB
CGO1 SMARTPHONE FPV APP
1. Download the Free CGO1 App to your smartphone or
tablet at the Apple App Store or Google Play.
2. Power on CGO1 (slide the power switch toward the
‘Mode’ button).
3. Open your device’s Wi-Fi settings and connect to the
CGO1_****** network.
4. Enter the password ‘key’ located on the CGO1.
cable.
2. Slide the power switch to the right toward the MODE
9
5. O
Now, you will be able to control the camera with your
Page 10
button to switch on the CGO1.
3. Double click ‘My Computer’, locate and double click
smartphone or tablet, plus adjust settings.
‘Removable Disk’.
4. Double click ‘DCIM’ folder icon to view all Photo and
Video
On a Mac:
1. Connect the CGO1 to the Mac using the included USB
cable.
2. Slide the power switch to the right toward the MODE
button to switch on the CGO1.
3. Icon will appear on desktop. Double click the icon to view
IMPORTANT NOTE:
remove the MicroSD card. Removing the MicroSD card prior
Also
your CGO1 to ensure your video is properly stored in the
we recommend pressing and holding the SHUTTER Button
for 2 seconds until the Video/Photo and Wi-Fi indicator lights
and help preserve your precious photo/
CGO1 SMARTPHONE FPV APP
1. Download the Free CGO1 App to your smartphone or
tablet at the Apple App Store or Google Play.
2. Power on CGO1 (slide the power switch toward the
‘Mode’ button).
3. Open your device’s Wi-Fi settings and connect to the
CGO1_****** network.
4. Enter the password ‘key’ located on the CGO1.
USING ST24 TO CONTROL CGO1
The CGO1 is directly compatible with Yuneec Personal
Ground Stations (PGS ST24 / ST15) with integrated FPV
capability and unique capacitive touch screen Android user
interface. For more information, please visit Yuneec.com
1. Power on CGO1 (slide the power switch toward the
‘Mode’ button).
2. Select ‘PAD’ from the ST24’s ‘Home Settings’. Enter Wi-Fi
settings and connect to the CGO1_****** network.
3. Enter the password ‘key’ located on th
5. O
pen the CGO1 App on your smartphone or tablet.
Now, you will be able to control the camera with your
4. When network connection is successful, Via ‘Home Settings’,
10
Page 11
smartphone or tablet, plus adjust settings.
5. Press and release SHUTTER BUTTON on the left-hand side
of the transmitter. ST24 will emit an audible tone one time,
IMPORTANT NOTE:
remove the MicroSD card. Removing the MicroSD card prior
Also
your CGO1 to ensure your video is properly stored in the
we recommend pressing and holding the SHUTTER Button
for 2 seconds until the Video/Photo and Wi-Fi indicator lights
and help preserve your precious photo/
and Start capture/Capture complete appears at the top of
screen.
6. Press RECORD BUTTON on the right-hand side of the trans-
mitter. “Start record” will appear at the top of the screen, along
with record time displayed on the right side of the screen.
7. Press RECORD BUTTON again. “
the top of the screen.
8. Check the Video Recording via ST24:
Press Landing Button > System Settings > FPV Quick Review
IMPORTANT NOTE:
USING ST24 TO CONTROL CGO1
The CGO1 is directly compatible with Yuneec Personal
Ground Stations (PGS ST24 / ST15) with integrated FPV
capability and unique capacitive touch screen Android user
interface. For more information, please visit Yuneec.com
1. Power on CGO1 (slide the power switch toward the
‘Mode’ button).
2. Select ‘PAD’ from the ST24’s ‘Home Settings’. Enter Wi-Fi
settings and connect to the CGO1_****** network.
3. Enter the password ‘key’ located on th
e CGO1.
4. When network connection is successful, Via ‘Home Settings’,
your CGO1 to ensure your video is properly stored in the
we recommend pressing and holding the SHUTTER Button
for 2 seconds until the Video/Photo and Wi-Fi indicator lights
and help preserve your precious photo/
CGO1 LED STATUS
Video/Photo Indicator Light:
WiFi Indicator Light:
Power On(default):
11
Page 12
5. Press and release SHUTTER BUTTON on the left-hand side
of the transmitter. ST24 will emit an audible tone one time,
and Start capture/Capture complete appears at the top of
screen.
6. Press RECORD BUTTON on the right-hand side of the trans-
Video Mode:
mitter. “Start record” will appear at the top of the screen, along
with record time displayed on the right side of the screen.
7. Press RECORD BUTTON again. “
Stop record” will appear at
the top of the screen.
During Recording:
Photo Mode:
8. Check the Video Recording via ST24:
Press Landing Button > System Settings > FPV Quick Review
Photo Taken:
IMPORTANT NOTE:
Charging:
your CGO1 to ensure your video is properly stored in the
we recommend pressing and holding the SHUTTER Button
for 2 seconds until the Video/Photo and Wi-Fi indicator lights
and help preserve your precious photo/
CGO1 LED STATUS
Video/Photo Indicator Light:
WiFi Indicator Light:
Power On(default):
Red
Blue
Red Video/Photo Indicator
Light is ON, 10 seconds after,
Low Battery:
WiFi on:
SD card full, no SD card or
12
Page 13
shes 3 times, red Video/Photo
Video Mode:
During Recording:
Photo Mode:
Photo Taken:
and then both are on (Record
Mode, WiFi open).
Red Video/Photo Indicator
Light is on
Video/Photo Indicator Light
Video/Photo Indicator Light
for 1.4s)
Video/Photo Indicator Light
Charging:
Both red Video/Photo
Indicator Light and blue WiFI
Indicator Light are on. When
charging is complete, red
Video/Photo Indicator Light
cator Ligh is on.
Low Battery:
Both red Video/Photo Indicato
r
Light and blue WiFI Indicator
WiFi on:
WiFI Indicator Light is on
SD card full, no SD card or
Both red Video/Photo Indicator
13
Page 14
SD card Problem:
Light and blue WiFI Indicator
Reject SD card:
Both red Video/Photo Indicator
Light and blue WiFI Indicator
showing rejection success.
SAFETY WARNINGS
Please avoid directly touching the aluminum alloy back
cover. When CGO1 is working with Wi-Fi on, the camera
body may become hot to touch because of the highperformance nature of the product. CGO1’s aluminum
alloy back cover is specially designed to help dissipate heat
r
under normal operating conditions.
CAUTION: Risk of explosion if CGO1 battery is replaced by
an incorrect battery. Use only Yuneec’s CGO1 battery that i
s
specially developed for the CGO1. Dispose of batteries according to your local laws.
This symbol means that according to the local
laws and regulations your product should be
disposed of separately from household waste.
When this product reaches its end of life, take
it to a collection point designated by local authorities. Some
14 15 16 17
Page 15
collection points accept products for free. The separate
collection and recycling of your product at the time of
disposal will help conserve natural resources and ensure
that it is recycled in a manner that protects human health
and the environment.
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions:
1. This device may not cause interference and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
Charge current:
Charge current should not more than the maximum charge
s
500mA~1A or lower).Charging with higher current may
damage the cell or even lead to safety problem, e.g. overheating or leakage.
Charge voltage:
charging voltage for each cell. Never charge the battery in
series and be sure that each single cell has a separated
charging circuit with a max. Charging voltage of 4.25V or
The user is fully responsible to the result of misusing the
battery.
Page 16
Charge temperature:
The cell should be charged within the range of temperatures
diately when the surface temperature of the battery is over
50˚C.
Reverse charging:
Please make sure the polarities of cells are connected properly before charging, reverse charging is strictly prohibited.
Reverse charging cannot charge the cells but will deteriorate
their charging/discharging and safety characteristics, or
Discharge current:
SDL- 103228 - 1050 mAh - 1S1P
Storage:
If you intend to keep the battery for a long time (3months
or longer), it is strongly recommended that the battery shall
be stored under the environment with temperature 10-25˚C,
low humidity and without corrosive gas. The battery should
be charged every six months to ensure that each cell’s
storage voltage is 3.6~3.9V.
Other:
The aluminum packing foil is very soft that it will be easily
left scratches. Please do not hit the cell with any sharp edge
The cell shall be discharged at the current no more than the
battery and cause over-heat.
Operation temperature:
over 70˚C.
Over-discharge:
Over-discharge will deteriorate the cell’s performance and
explosion.
Short circuit the battery is strictly prohibited; it may damage
the battery seriously.
and strictly prohibited.
To immerge the battery into liquid such as water is strictly
prohibited.
Avoid vibration, shock or extrude the battery. Handle care-
fully when moving it.
characteristics. Do not over dis-charge a battery below
2.75V/cell.
Page 17
SDL- 103228 - 1050 mAh - 1S1P
Storage:
If you intend to keep the battery for a long time (3months
or longer), it is strongly recommended that the battery shall
be stored under the environment with temperature 10-25˚C,
low humidity and without corrosive gas. The battery should
be charged every six months to ensure that each cell’s
storage voltage is 3.6~3.9V.
Other:
The aluminum packing foil is very soft that it will be easily
left scratches. Please do not hit the cell with any sharp edge
explosion.
Short circuit the battery is strictly prohibited; it may damage
the battery seriously.
and strictly prohibited.
To immerge the battery into liquid such as water is strictly
prohibited.
Avoid vibration, shock or extrude the battery. Handle care-
fully when moving it.
Page 18
WARRANTY
Limited Warranty:
Yuneec warrants that for a period of one (1) year from original
date of purchase, the product will be free from defects in materials and workmanship under normal use. In the event of
a defect, please contact Yuneec Customer Support
(www.Yuneec.com) for assistance. Yuneec’s sole obligation
under this warranty will be, at its option, to repair or replace
the product. This warranty does not apply to products damaged by misuse, accident, water damage, or normal wear and
tear. Yuneec disclaims all other expressed or implied warranties
or conditions. To the extent not prohibited by law, in no event
or for any special, indirect, consequential, incidental or punitive
damages, however caused, arising out of or related to the use of
or inability to use the product, even if Yuneec has been advised
of the possibility of such damages. In no event will Yuneec’s
liability exceed the amount paid by you for the product. Some
jurisdictions do not allow limitations on how long an implied
warranty lasts, or the exclusion or limitation of incidental
or consequential damages, so the above limitations or
exclusions may not apply to you. This warranty gives you
vary by jurisdiction.
18
Page 19
ABOUT THE QUICK START MANUAL
Yuneec reserves the right to update manuals, quick start
guides and warranty information at any time. For the latest
manual and quick start information, as well as warranty information, please visit
YUNEEC.COM
19
Loading...