York CZB01811, CZB03011, CZB02411, CZB03611, CZB04211 Technical Manual

TECHNICAL GUIDE

AFFINITY
SPLIT-SYSTEM AIR CONDITIONERS
13 SEER – R-410A
MODELS:

CZB018 THRU 060
(1.5 THRU 5 NOMINAL TONS

LISTED

Due to continuous product improvement, specifications
are subject to change without notice.

Visit us on the web at www.york.com
Additional rating information can be found at

www.ari.org/aridirectory

)

ISO 9001

Certified Quality

Management System

246723-YTG-L-0807

DESCRIPTION

The CZB Series condensing unit is the outdoor part of a versa­tile air conditioning system. It is designed to be custom matche d
with one of our complete line of evaporator sections, each
designed to serve a specific function. Matching air handlers are
available for upflow, downflow, and horizontal left or right appli­cation to provide a complete system. Electric heaters are avail­able if required. Add-on coils are available for use with upflow,
downflow, or horizontal furnaces. Field installed accessories are
available as needed.

WARRANTY

5-year limited parts warranty.
10-year limited compressor warranty.

FEATURES

• Superior Coil Protection – A stamped decorative metal coil
guard completely protects coil from debris and other large
damaging material while a polymer mesh further protects the
coil against smaller particles.

• Color Grilles - Engineered around the needs and wants of
the consumer, Af fi nity unit s are now availab le wi th a ch oice of
color options designed to compliment any home.

• Isolated Compressor Compartment – A molded composite
bulkhead isolates the compressor from the rest of the unit
reducing sound and vibration.

• Protected Compressors – Each compressor is protected
against abnormal pressures by an internal pressure relief
valve and factory installed high and low pressure controls.
Additional protection against moisture and debris is provided
by factory installed liquid line filter driers.

• Environmentally Friendly Refrigerant – Next generation
refrigerant R-410A delivers environmentally friendly perfor­mance with zero ozone depletion.

• Durable Finish – Automotive quality finish provides the ulti­mate protection from harmful U.V. rays and rust creep ensur­ing long-lasting high quality appearance. A powder-paint
topcoat is applied over a baked-on primer, using a galva­nized, zinc coated steel base material. The result is a finish
that has been proven in testing to provide 33% greater dura­bility than conventional powder-coat finishes.

• Lower Installed Cost – Designed to provide enhanced
installability by featuring a slide-down control compartment
and angled service valves to reduce overall installation time
and cost.

• Low Operating Sound Levels – A fan design boasting tech­nology adapted from aeronautic and defense engineering
provides for whisper quiet operation by allowing airflow to
flow smoothly and efficiently across the fan tips.

• Filter-Drier – A factory installed, solid core liquid line filter­drier filters harmful debris and moisture from the system.

• Easy Service Access – A full end, full service, access panel
with handle makes for easy entry to internal components.

• Composite Base - Strong and durable composite base pan
resists rust and corrosion while it helps reduce vibrations and
noise.

• Quiet drive system - Features combination of swept-wing
fan, composite base pan, isolated compressor compartment
and two-stage compressor to reduce overall sound to a mere
whisper.

• Low RPM fan motor - Helps to reduce airflow noise.

Certified in accordance with the Unitary Small Equipment certifi­cation program, which is based on ARI Standard 210/240.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

246723-YTG-L-0807

PHYSICAL AND ELECTRICAL DATA

MODEL CZB01811 CZB02411 CZB03011 CZB03611 CZB04211 CZB04811 CZB06011
Unit Supply Voltage 208-230V, 1φ, 60Hz

Normal Voltage Range
Minimum Circuit Ampacity 13.3 16.5 18.9 22.3 28.7 27.9 34.4

Max. Overcurrent Device Amps
Min. Overcurrent Device Amps

Compressor Type Scroll Scroll Scroll Scroll Scroll Scroll Scroll
Compressor Amps
Crankcase Heater No No No No No No No

Fan Motor Amps Rated Load 0.5 0.5 0.5 1.5 1.5 1.5 1.5
Fan Diameter Inches 22 22 22 22 22 22 22

Fan Motor

Coil

Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 3/4 7/8 7/8 7/8

Unit Charge (Lbs. - Oz.)
Charge Per Foot, Oz. 0.62 0.62 0.62 0.62 0.67 0.67 0.67
Operating Weight Lbs. 165 170 190 190 205 215 260

1 Rated in accordance with ARI Standard 110, utilization range “A”.
2 Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3 Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4 The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than

15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.

1

2

3

20 25 30 35 50 45 60
15 20 20 25 30 30 35

187 to 252

Rated Load 10.3 14.3 16.4 16.6 21.8 21.1 26.3
Locked Rotor 51 60 73 88 105 113 150

Rated HP 1/15 1/15 1/15 1/4 1/4 1/4 1/4
Nominal RPM 850 850 850 850 850 850 850

Nominal CFM 2100 2,250 2,300 3,200 3,250 3,500 3,500
Face Area Sq. Ft. 14.86 14.86 17.15 17.15 20.58 20.58 20.58
Rows Deep 1111112
Fins / Inch 22 22 22 22 22 22 22

4

5-13 6-4 7-4 6-4 8-13 8-12 13-9

VAPOR

LIQUID

2-3/8

3-1/8

6-1/2

All dimensions are in inches. They are subject to change without
notice. Certified dimensions will be provided upon request.

DIMENSIONS

Unit

Model

A

018 29-1/2 37 31
024 29-1/2 37 31
030 33-1/2 37 31

C

B

036 33-1/2 37 31
042 39-1/2 37 31

060 39-1/2 37 31

Dimensions

(Inches)

Refrigerant Connection

Service Valve Size

A B C Liquid Vapor

3/4”

3/8”

7/8”048 39-1/2 37 31

2 Unitary Products Group

Additional R-410A Charge / TXV Size for Various Matched Systems

Outdoor Unit
Unit Orifice (s)
Factory R-410A Charge, lbs-oz

246723-YTG-L-0807

CZB01811 CZB02411 CZB03011 CZB03611 CZB04211 CZB04811 CZB06011

1TVM901 1TVM903 1TVM903 1TVM903

5-13 6-4 7-4 6-4 8-13 8-12 13-9

1TVM904
1TVM4C1

1TVM905 1TVM905

Indoor Coil

FC/MC/PC/UC18A3X 5––––––
FC/MC/PC/UC18B3X 5––––––
FC/MC/PC/UC24A3X 56–––––
FC/MC/PC/UC24B3X 56–––––
FC/MC/PC/UC30A3X 563––––
FC/MC/PC/UC30B3X 563––––
FC/MC/PC/UC36A3X ––33–––
FC/MC/PC/UC36B3X ––33–––
FC/MC/PC/UC36C3X ––33–––
FC/MC/PC35B3X –––3–––
FC/MC/PC35C3X –––3–––
FC/MC/PC/UC42B3X –––3–––
FC/MC/PC/UC42C3X –––3–––
FC/MC/PC/UC48C3X –––– 6––
FC/MC/PC/UC48D3X ––––6––
FC/PC/UC60C3X –––––124
FC/MC/PC/UC60D3X –––––124
MC61D3X ––––––4
HC18A3X 5––––––
HC30A3X –6–––––
HC36B3X ––33–––
HC60D3X ––––6124
HD24A3X –––––––
HD36B3X ––33–––
HD48C3X ––––6––
HD60D3X –––––124
AHP18B3X 5––––––
AHP24B3X 56–––––
AHP30B3X ––3––––
AHP36C3X ––33–––
AHP42C3X –––3–––
AHP/SHP48D3X ––––612–
AHP/SHP60D3X ––––6124
AV24B3X 56–––––
AV36C3X ––33–––
AV/SV48D3X ––––612–
AV/SV60D3X –––––124

FOOTNOTES:

PROCEDURES:

1,2

1 Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit 2FD06700224.
2 PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.

1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of intercon­necting line tubing.

2. Verify the TXV and additional charge required for specific evaporator coil in the system using the above table.

3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in the Physical and Electri­cal Data Table.

4. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for
evaporator + adder for line set.

Additional Charge, Oz

Unitary Products Group 3

246723-YTG-L-0807

COOLING CAPACITY - With Air Handler Coils

UNIT

MODEL

CZB01811

CZB02411

CZB03011

CZB03611

CZB04211

CZB04811

CZB06011

CZB01811
CZB02411
CZB03011

CZB03611

CZB04211
CZB04811
CZB06011

CZB01811

CZB02411 AHP24 17 – 800 23.0 16.9 13.00 11.00

CZB03011

CZB03611

CZB04211

CZB04811
CZB06011 AHP/SHP60 24 – 1800 55.5 39.7 13.00 11.00

For Notes See Page 5

AIR HANDLER

MODEL W

MA08B 17 FC/MC18B 600 18.0 12.1 13.00 11.00
MA08B 17 FC/MC24B 600 18.0 12.1 13.00 11.00
MA08B 17 FC/MC30B 600 18.0 12.1 13.00 11.00
MA08B 17 FC/MC24B 800 23.2 16.9 13.00 11.00
MA08B 17 FC/MC30B 800 23.2 16.9 13.00 11.00
MA12B 17 FC/MC30B 1000 29.8 21.7 13.00 11.00
MA12B 17 FC/MC36B 1000 30.0 21.9 13.00 11.00
MA12B 17 FC/MC35B 1200 36.0 26.5 13.00 11.00
MA12B 17 FC/MC36B 1200 35.6 26.3 13.00 11.00
MA12B 17 FC/MC42B 1200 36.0 26.5 13.00 11.00
MA16C 21 FC/MC48C 1400 41.0 30.2 13.00 11.00
MA14D 24 FC/MC48D 1400 41.0 30.2 13.00 11.00
MA20D 24 FC/MC60D 1600 48.0 35.8 13.00 11.00
MA16C 21 FC60C 1600 48.0 35.8 13.00 11.00
MA20D 24 FC/MC60D 1800 55.5 39.7 13.00 11.00
MA20D 24 MC61D 1800 56.0 40.0 13.00 11.00

1 PH 13 SEER AC WITH MV - VARIABLE SPEED

MV12B 17 MC18B 600 18.1 12.1 14.00 11.50
MV12B 17 MC24B 825 23.2 16.9 14.00 11.50
MV12B 17 MC36B 1000 30.6 22.3 14.00 11.50
MV12B 17 MC36B 1200 36.0 26.5 13.50 11.00

MV12B 17 MC42B 1200 36.2 26.7 13.80 11.00
MV16C 21 MC48C 1380 41.5 30.5 13.50 11.00
MV20D 24 MC48D 1380 41.5 30.5 13.50 11.00
MV20D 24 MC60D 1600 48.5 36.1 13.25 11.00
MV20D 24 MC60D 1780 55.5 39.7 13.10 11.00
MV20D 24 MC61D 1780 57.5 41.1 13.25 11.00

1 PH 13 SEER AC WITH AHP/ SHP / F*FP

AHP18 17 – 600 18.0 12.1 13.00 11.00
AHP24 17 – 600 18.0 12.3 13.00 11.00

F*FP024 17 – 600 18.0 12.1 13.00 11.00

AHP30 17 – 1000 30.0 21.9 13.00 11.00
AHP36 17 – 1000 30.0 21.9 13.00 11.00

F*FP036 21 – 1000 30.0 22.3 13.00 11.00

AHP36 17 – 1200 36.0 26.5 13.00 11.00

AHP42 21 – 1200 36.0 26.5 13.00 11.00
F*FP036 21 – 1200 36.0 26.7 13.00 11.00
F*FP048 21 – 1200 36.0 26.8 13.00 11.00

AHP/SHP48 24 – 1400 41.5 30.5 13.00 11.00
AHP/SHP60 24 – 1400 41.5 30.5 13.00 11.00

F*FP048 24 – 1400 41.0 30.2 13.00 11.00

AHP/SHP48 24 – 1600 48.0 36.1 13.00 11.00
AHP/SHP60 24 – 1600 48.0 36.1 13.00 11.00

COIL MODEL

1 PH 13 SEER AC WITH MA

1

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

4 Unitary Products Group

246723-YTG-L-0807

COOLING CAPACITY - With Air Handler Coils (Continued)

UNIT

MODEL

AIR HANDLER

MODEL W

COIL MODEL

1

RATED

CFM

TOTAL SENS.

1 PH 13 SEER AC WITH AV / SV / F*FV VARIABLE SPEED

CZB01811 AV24 17 – 600 18.0 12.1 14.00 11.50
CZB02411 AV24 17 – 800 23.0 16.7 14.00 11.50
CZB03011 AV36 17 – 1000 30.0 21.9 14.00 11.50
CZB03611 AV36 17 – 1200 36.0 26.5 14.00 11.50
CZB04211 AV/SV48 24 – 1400 41.5 30.5 14.00 11.50

AV/SV48 24 – 1600 48.0 35.8 14.00 11.50

CZB04811

AV/SV60 24 – 1600 48.0 35.8 14.00 11.50
F*FV060 24 – 1600 48.0 36.5 13.25 11.00

CZB06011

Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.
Cooling MBH based on 80°F entering air temperature, 50% RH, and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power
input in watt-hours during the same period.

AV/SV60 24 – 1800 57.0 40.8 14.00 11.50
F*FV060 24 – 1780 55.5 40.8 13.25 11.00

1 MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.

Go to www.ari.org/aridirectory for the latest additional matches.

COOLING

NET MBH

SEER EER

COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils

UNIT MODEL

FURNACE

CFM RANGE

(MIN.-MAX.)

W

COIL

MODEL

RATED

CFM

TOTAL SENS.

14,17 FC/MC/PC/UC18 600 18.0 12.1 13.00 11.00

CZB01811

450
750

14,17 FC/MC/PC/UC24 600 18.0 12.1 13.00 11.00
14,17 FC/MC/PC/UC30 600 18.0 12.1 13.00 11.00

14 HC18 570 18.0 12.1 13.00 11.00

14,17 FC/MC/PC/UC24 800 23.2 16.9 13.00 11.00

CZB02411

600

1000

14,17 FC/MC/PC/UC30 800 23.2 16.9 13.00 11.00

14 HC30 760 22.6 16.5 13.00 11.00

– HD24 800 22.6 16.5 13.00 11.00

14,17 FC/MC/PC/UC30 1000 29.8 21.7 13.00 11.00

CZB03011

800

1200

14,17,21 FC/MC/PC/UC36 1000 30.0 21.9 13.00 11.00

17 HC36 950 30.0 21.9 13.00 11.00

– HD36 1000 30.0 21.9 13.00 11.00

17, 21 FC/MC/PC35 1200 36.0 26.5 13.00 11.00

CZB03611

1000
1400

14,17,21 FC/MC/PC/UC36 1200 35.6 26.3 13.00 11.00

17,21 FC/MC/PC/UC42 1200 36.0 26.5 13.00 11.00

17 HC36 1140 36.0 26.5 13.00 11.00

– HD36 1200 35.8 26.4 13.00 11.00

CZB04211

CZB04811

1200
1600

1400
1800

21,24 FC/MC/PC/UC48 1400 41.0 30.2 13.00 11.00

24 HC60 1330 40.5 29.8 13.00 11.00

– HD60 1400 40.0 29.4 13.00 11.00

21,24 FC/MC/PC/UC60 1600 48.0 35.8 13.00 11.00

24 HC60 1600 48.0 35.8 13.00 11.00

– HD60 1600 48.0 35.8 13.00 11.00

21,24 FC/MC/PC/UC60 1800 55.5 39.7 13.00 11.00

CZB06011

1600
2000

24 HC60 1800 55.5 39.7 13.00 11.00

– HD60 1800 55.5 39.7 13.00 11.00

24 MC61 1800 56.0 40.0 13.00 11.00

1 Requires a 2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
2 TXV = Use 1TV900 series kit.

COOLING

NET MBH

SEER

1,2

EER

Unitary Products Group 5

246723-YTG-L-0807

COOLING CAPACITY - With Variable Speed Furnaces

UNIT MODEL

CZB01811

CZB02411

CZB03011

CZB03611

For Notes See Page 7.

VARIABLE SPEED
FURNACE MODEL

1 PH 13 SEER AC WITH VARIABLE SPEED FURNACES

PV8*A12 FC/MC/PC24A 14 600 18.0 12.2 14.00 11.50
PV9*A12 FC/MC/PC24A 14 600 18.0 12.2 14.00 11.50

P(C,V)9*B12 FC/MC/PC24B 17 600 18.0 12.2 14.00 11.50

PV8*A12 FC/MC/PC30A 14 600 18.0 12.2 14.00 11.50
PV9*A12 FC/MC/PC30A 14 600 18.0 12.2 14.00 11.50

P(C,V)9*B12 FC/MC/PC30B 17 600 18.0 12.2 14.00 11.50

PV8*A12 HC18 14 600 18.0 12.2 14.00 11.50
PV9*A12 HC18 14 600 18.0 12.2 14.00 11.50
PV8*A12 FC/MC/PC24A 14 800 23.6 17.2 14.00 11.50
PV9*A12 FC/MC/PC24A 14 800 23.6 17.2 14.00 11.50

P(C,V)9*B12 FC/MC/PC24B 17 800 23.6 17.2 14.00 11.50

PV8*A12 FC/MC/PC30A 14 800 23.6 17.2 14.00 11.50
PV9*A12 FC/MC/PC30A 14 800 23.6 17.2 14.00 11.50

P(C,V)9*B12 FC/MC/PC30B 17 800 23.6 17.2 14.00 11.50

PV8*A12 HC30 14 800 22.8 16.6 14.00 11.50
PV9*A12 HC30 14 800 22.8 16.6 14.00 11.50
PV8*A12 HD24 14 800 22.8 16.6 14.00 11.50
PV9*A12 HD24 14 800 22.8 16.6 14.00 11.50
PV8*A12 FC/MC/PC30A 14 1000 30.0 21.9 13.50 11.00
PV9*A12 FC/MC/PC30A 14 1000 30.0 21.9 13.50 11.00
PV8*B16 FC/MC/PC30B 17 1000 30.0 21.9 13.50 11.00

P(C,V)9*B12 FC/MC/PC30B 17 1000 30.0 21.9 13.50 11.00

PV8*A12 FC/MC/PC36A 14 1000 30.0 22.3 14.00 11.50
PV9*A12 FC/MC/PC36A 14 1000 30.0 22.3 14.00 11.50
PV8*B16 FC/MC/PC36B 17 1000 30.0 22.3 14.00 11.50

P(C,V)9*B12 FC/MC/PC36B 17 1000 30.0 22.3 14.00 11.50

PV8*C16 FC/MC/PC36C 21 1000 30.0 22.3 14.00 11.50

P(C,V)9*C16 FC/MC/PC36C 21 1000 30.0 22.3 14.00 11.50

PV8*B16 HC36 17 1050 30.0 22.0 14.00 11.50

P(C,V)9*B12 HC36 17 1050 30.0 22.0 14.00 11.50

PV8*C16 HD36 21 1050 30.0 22.0 14.00 11.50

P(C,V)9*C16 HD36 21 1050 30.0 22.0 14.00 11.50

PV8*A12 FC/MC/PC36A 14 1200 35.0 25.8 13.25 11.00
PV9*A12 FC/MC/PC36A 14 1200 35.8 26.4 13.50 11.00
PV8*B16 FC/MC/PC36B 17 1200 36.0 26.5 13.50 11.00

P(C,V)9*B12 FC/MC/PC36B 17 1200 35.8 26.4 13.50 11.00

PV8*C16 FC/MC/PC36C 21 1200 36.0 26.5 13.50 11.00

PV8*C20 FC/MC/PC36C 21 1200 36.0 26.5 13.50 11.00
P(C,V)9*C16 FC/MC/PC36C 21 1200 35.8 26.4 13.50 11.00
P(C,V)9*C20 FC/MC/PC36C 21 1200 35.8 26.4 13.50 11.00

PV8*B16 FC/MC/PC42B 17 1200 36.0 27.3 13.50 11.00
P(C,V)9*B12 FC/MC/PC42B 17 1200 36.0 26.7 13.50 11.00

PV8*C16 FC/MC/PC42C 21 1200 36.0 27.3 13.50 11.00

PV8*C20 FC/MC/PC42C 21 1200 36.0 27.3 13.50 11.00

PV8*B16 HC36 17 1200 36.0 26.5 13.25 11.00
P(C,V)9*B12 HC36 17 1200 36.0 26.5 13.25 11.00

PV8*C16 HD36 21 1200 36.0 26.5 13.25 11.00
P(C,V)9*C16 HD36 21 1200 36.0 26.5 13.25 11.00
P(C,V)9*C20 HD36 21 1200 36.0 26.5 13.25 11.00

COIL

MODEL

1

COOLING

W

RATED

CFM

NET MBH

TOTAL SENS.

2

SEER EER

6 Unitary Products Group

COOLING CAPACITY - With Variable Speed Furnaces

UNIT MODEL

CZB04211

CZB04811

CZB06011

1 MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2 Variable speed furnaces have B.O.D (Blower on Delay) standard.

VARIABLE SPEED
FURNACE MODEL

1 PH 13 SEER AC WITH VARIABLE SPEED FURNACES

PV8*C16 FC/MC/PC48C 21 1400 41.0 30.2 13.50 11.00

PV8*C20 FC/MC/PC48C 21 1400 41.0 30.2 13.50 11.00
P(C,V)9*C16 FC/MC/PC48C 21 1400 41.0 30.2 13.50 11.00
P(C,V)9*C20 FC/MC/PC48C 21 1400 41.0 30.2 13.50 11.00
P(C,V)9*D20 FC/MC/PC48D 24 1400 41.0 30.2 13.50 11.00

PV8*C20 HC60 21 1400 40.5 29.8 13.25 11.00
P(C,V)9*C20 HC60 21 1400 40.5 29.8 13.25 11.00

PV8*C16 HD60 21 1400 40.5 29.8 13.25 11.00

PV8*C20 HD60 21 1400 40.5 29.8 13.25 11.00
P(C,V)9*C16 HD60 21 1400 40.5 29.8 13.25 11.00
P(C,V)9*C20 HD60 21 1400 40.5 29.8 13.25 11.00
P(C,V)9*D20 HD60 24 1400 40.5 29.8 13.25 11.00
P(C,V)9*C20 FC/PC60C 21 1600 48.0 36.1 13.05 11.00
P(C,V)9*C20 FC/MC/PC60D 21 1600 48.0 36.1 13.05 11.00
P(C,V)9*D20 FC/MC/PC60D 24 1600 48.0 36.1 13.25 11.00

PV8*C20 HC60 21 1600 48.0 36.1 13.05 11.00
P(C,V)9*D20 HC60 24 1600 48.0 36.1 13.25 11.00

PV8*C20 HD60 21 1600 48.0 36.1 13.05 11.00
P(C,V)9*D20 HD60 24 1600 48.0 36.1 13.25 11.00

PV8*C20 FC/PC60C 21 1730 55.5 39.7 13.10 11.00
P(C,V)9*C20 FC/PC60C 21 1620 55.0 39.3 13.05 11.00

PV8*C20 FC/MC/PC60D 21 1730 55.5 39.7 13.10 11.00
P(C,V)9*C20 FC/MC/PC60D 21 1620 55.0 39.3 13.05 11.00
P(C,V)9*D20 FC/MC/PC60D 24 1620 55.0 39.3 13.25 11.00

PV8*C20 HC60 21 1610 55.0 39.3 13.10 11.00
P(C,V)9*D20 HC60 24 1610 55.0 39.3 13.10 11.00

PV8*C20 HD60 21 1610 55.0 39.3 13.10 11.00
P(C,V)9*D20 HD60 24 1610 55.0 39.3 13.10 11.00

PV8*C20 MC61D 21 1620 56.5 40.4 13.25 11.00
P(C,V)9*C20 MC61D 21 1620 56.5 40.4 13.25 11.00
P(C,V)9*D20 MC61D 24 1620 56.5 40.4 13.25 11.00

COIL

MODEL

1

W

RATED

CFM

NET MBH

TOTAL SENS.

2

246723-YTG-L-0807

COOLING

SEER EER

Unitary Products Group 7

246723-YTG-L-0807

ACCESSORIES*

Hard Start Kit (024-31994-000, 024-31995-000) - Provides

increased starting torque for areas with low voltage.
TXV Kits - 1TV09 series thermal expansion valves precisely meter

refrigerant for optimum performance
Low Ambient Pressure Switch Kit (2LA06700424) - Allows use of

air conditioning at low outdoor ambient temperatures. For use with
models containing R-410A refrigerant only.

Dehumidistat (2HU16700124) - Provides increased dehumidifica­tion when matched with variable speed furnace or air handler.

ROOM THERMOSTATS - A wide selection of compatible thermosets
are available to provide optimum performance and features for any
installation.

1H/1C, manual changeover electronic non-programmable thermo­stat.

1H/1C, auto/manual changeover, electronic programmable, deluxe
7-day, thermostat.

1H/1C, auto/manual changeover, electronic programmable.
* For the most current accessory information, refer to the price book

or consult factory.

SOUND POWER RATINGS*

UNIT MODEL (dBA)

018 65
024 69
030 69
036 72
042 72
048 72
060 72

* Rated in accordance with ARI 270-95 Standards.

COLOR GRILLES

CHOICE OF SEVERAL COLOR COIL GRILLES TO

COMPLIMENT ANY HOME.

Color Grill Color Description

1CP0126 Terra Cotta 018, 024
1CP0130 Terra Cotta 030, 036
1CP0136 Terra Cotta 042, 048, 060
1CP0226 Jet Black 018, 024
1CP0230 Jet Black 030, 036
1CP0236 Jet Black 042, 048, 060
1CP0326 Stone 018, 024
1CP0330 Stone 030, 036
1CP0336 Stone 042, 048, 060
1CP0426 Bermuda 018, 024
1CP0430 Bermuda 030, 036
1CP0436 Bermuda 042, 048, 060
1CP0526 Gunmetal 018, 024
1CP0530 Gunmetal 030, 036
1CP0536 Gunmetal 042, 048, 060
1CP0626 Chocolate 018, 024
1CP0630 Chocolate 030, 036
1CP0636 Chocolate 042, 048, 060

8 Unitary Products Group

246723-YTG-L-0807

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. CZB01811
INDOOR COIL MODEL NO. FC/MC/PC/UC18

CONDENSER

ENTERING AIR

TEMPERATURE

65

75

85

95

105

115

125

NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.

ID CFM

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72

T.C. 15.3 17.6 16.6 19.3 22.0 17.2 19.5 18.3 21.3 22.8 19.2 21.4 20.0 23.3 23.5
S.C. 15.3 13.2 10.7 11.3 9.2 17.2 15.9 12.6 13.4 10.2 19.1 18.6 14.6 15.6 11.2
K.W. 1.1 1.1 1.1 1.1 1.0 1.1 1.1 1.1 1.1 1.0 1.1 1.1 1.1 1.0 1.1

T.C. 14.7 16.9 16.0 18.4 20.6 16.5 18.7 17.6 20.2 21.5 18.4 20.4 19.2 22.0 22.5
S.C. 14.7 13.0 10.5 10.9 8.7 16.5 15.5 12.4 12.9 9.7 18.3 17.9 14.3 15.0 10.8
K.W. 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

T.C. 14.1 16.2 15.5 17.5 19.2 15.8 17.8 16.9 19.1 20.3 17.5 19.3 18.3 20.7 21.5
S.C. 14.0 12.7 10.3 10.4 8.1 15.8 15.0 12.2 12.4 9.2 17.5 17.3 14.0 14.4 10.4
K.W. 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4

T.C. 13.4 15.5 14.9 16.6 17.9 15.1 16.9 16.1 18.0 19.1 16.7 18.3 17.4 19.4 20.4
S.C. 13.4 12.4 10.1 10.0 7.5 15.0 14.5 11.9 11.9 8.7 16.7 16.6 13.8 13.8 10.0
K.W. 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5

T.C. 12.7 14.6 13.8 15.6 16.8 14.3 15.9 15.0 16.9 17.9 15.8 17.3 16.2 18.1 19.0
S.C. 12.7 11.8 9.5 9.5 7.1 14.2 13.9 11.3 11.3 8.3 15.7 15.9 13.1 13.1 9.4
K.W. 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8

T.C. 12.0 13.7 12.7 14.6 15.7 13.5 15.0 13.9 15.7 16.6 14.9 16.4 15.1 16.9 17.6
S.C. 12.0 11.3 8.9 9.0 6.8 13.4 13.2 10.7 10.7 7.8 14.8 15.2 12.4 12.5 8.8
K.W. 2.1 2.1 2.1 2.0 2.0 2.1 2.1 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0

T.C. 11.3 12.9 11.7 13.6 14.6 12.7 14.1 12.8 14.6 15.4 14.0 15.4 13.9 15.6 16.2
S.C. 11.3 10.7 8.3 8.5 6.4 12.6 12.6 10.0 10.2 7.4 13.9 14.6 11.8 11.8 8.3
K.W. 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.2 2.3 2.3 2.3 2.3 2.2

450 600 750

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

MA08B FC/MC18B 1.00 1.00 1.00
MA08B FC/MC24B 1.00 1.00 1.00
MA08B FC/MC30B 1.00 1.00 1.00
MV12B MC18B 1.00 1.00 0.95

AHP18 – 1.00 1.00 1.00
AHP24 – 1.01 1.01 1.00
AV24 – 1.00 1.00 0.95
F*FP024 – 1.00 1.00 1.00
– FC/MC/PC/UC24 1.00 1.00 1.00
– FC/MC/PC/UC30 1.00 1.00 1.00
– HC18 0.98 0.97 1.00

T.C. S.C. KW

Variable Speed
Furnace

PV8*A12 FC/MC/PC24A 1.01 1.00 0.95
PV9*A12 FC/MC/PC24A 1.01 1.00 0.95
PV9*B12 FC/MC/PC24B 1.01 1.00 0.95
PV8*A12 FC/MC/PC30A 1.01 1.00 0.95
PV9*A12 FC/MC/PC30A 1.01 1.00 0.95
PV9*B12 FC/MC/PC30B 1.01 1.00 0.95
PV8*A12 HC18 1.01 1.00 0.95
PV9*A12 HC18 1.01 1.00 0.95

Coil

T.C. S.C. KW

Unitary Products Group 9

246723-YTG-L-0807

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. CZB02411
INDOOR COIL MODEL NO. FC/MC/PC/UC24

CONDENSER

ENTERING AIR

TEMPERATURE

65

75

85

95

105

115

125

NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.

ID CFM

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72

T.C. 19.2 19.4 22.0 23.0 26.2 21.5 21.2 22.1 23.8 26.5 23.8 25.7 22.3 24.6 26.8
S.C. 18.9 16.4 15.9 15.7 11.9 21.2 20.9 18.1 18.3 13.4 23.5 25.4 20.3 21.0 14.8

K.W. 1.8 1.9 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.9 1.8 1.8

T.C. 21.5 22.3 20.7 24.9 27.5 23.1 23.5 22.5 25.8 28.5 24.7 24.7 24.3 26.7 29.5
S.C. 21.2 18.3 14.9 15.5 12.4 22.8 21.3 17.3 17.7 13.8 24.4 24.4 19.8 19.9 15.2
K.W. 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

T.C. 20.3 20.8 21.4 23.9 26.8 22.3 23.0 22.3 24.8 27.5 24.3 25.2 23.3 25.7 28.2
S.C. 20.0 17.3 15.4 15.6 12.1 22.0 21.1 17.7 18.0 13.6 23.9 24.9 20.0 20.4 15.0
K.W. 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7

T.C. 18.9 19.6 19.7 22.2 25.0 20.8 21.4 20.6 23.0 25.7 22.6 23.3 21.5 23.8 26.3
S.C. 18.6 16.5 14.3 14.5 11.5 20.5 19.8 16.5 16.8 12.9 22.3 23.0 18.7 19.1 14.3
K.W. 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 2.1 2.0 2.0

T.C. 17.4 18.3 18.0 20.4 23.2 19.2 19.8 18.9 21.2 23.8 21.0 21.4 19.7 22.0 24.5
S.C. 17.2 15.7 13.2 13.4 10.9 18.9 18.4 15.2 15.6 12.2 20.7 21.1 17.3 17.8 13.6
K.W. 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4

T.C. 16.0 17.2 16.4 18.7 21.4 17.7 18.3 17.2 19.4 22.0 19.3 19.5 17.9 20.2 22.7
S.C. 15.8 15.0 12.1 12.4 10.3 17.4 17.1 14.0 14.4 11.6 19.1 19.2 15.9 16.5 12.8
K.W. 2.8 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7

T.C. 14.6 15.9 14.8 17.0 19.6 16.2 16.7 15.5 17.7 20.3 17.7 17.6 16.2 18.4 21.0
S.C. 14.4 14.2 11.0 11.4 9.7 16.0 15.8 12.8 13.3 10.9 17.5 17.3 14.6 15.2 12.1
K.W. 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1

600 800 1000

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

MA08B FC/MC24B 1.00 1.01 1.00
MA08B FC/MC30B 1.00 1.01 1.00
MV12B MC24B 1.00 1.01 0.95

AHP24 – 1.00 1.01 1.00
AV24 – 1.00 1.00 0.95
– FC/MC/PC/UC30 1.00 1.01 1.00
– HC30 0.98 0.98 1.00
– HD24 0.98 0.98 1.00

T.C. S.C. KW

Variable Speed
Furnace

PV8*A12 FC/MC/PC24A 1.02 1.02 0.95
PV9*A12 FC/MC/PC24A 1.02 1.02 0.95
P(C,V)9*B12 FC/MC/PC24B 1.02 1.02 0.95
PV8*A12 FC/MC/PC30A 1.02 1.02 0.95
PV9*A12 FC/MC/PC30A 1.02 1.02 0.95
P(C,V)9*B12 FC/MC/PC30B 1.02 1.02 0.95
PV8*A12 HC30 0.990.990.95
PV9*A12 HC30 0.990.990.95
PV8*A12 HD24 0.990.990.95
PV9*A12 HD24 0.990.990.95

Coil

T.C. S.C. KW

10 Unitary Products Group

246723-YTG-L-0807

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. CZB03011
INDOOR COIL MODEL NO. FC/MC/PC/UC30

CONDENSER

ENTERING AIR

TEMPERATURE

65

75

85

95

105

115

125

NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.

ID CFM 800 1000 1200

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72

T.C. 22.5 23.1 25.7 30.8 34.9 25.0 25.2 26.9 30.4 34.6 27.5 27.4 28.0 30.1 34.3
S.C. 23.0 19.2 18.2 21.2 17.3 25.7 23.9 20.8 22.5 18.1 28.3 28.5 23.4 23.9 19.0
K.W. 2.3 5.2 2.3 2.4 2.4 2.3 3.7 2.3 2.4 2.4 2.3 2.3 2.3 2.4 2.4

T.C. 25.8 28.5 29.0 31.5 35.5 28.0 29.8 29.9 32.5 36.7 30.3 31.1 30.8 33.6 37.9
S.C. 26.7 24.6 21.1 20.6 17.0 29.0 26.9 23.2 22.7 18.5 31.3 29.2 25.3 24.9 20.0
K.W. 2.0 2.0 2.0 2.0 2.1 2.0 2.0 2.0 2.0 2.1 2.0 2.0 2.0 2.0 2.1

T.C. 24.2 31.7 27.4 31.2 35.2 26.5 30.5 28.4 31.5 35.6 28.9 29.3 29.4 31.8 36.1
S.C. 24.9 21.9 19.7 20.9 17.2 27.3 25.4 22.0 22.6 18.3 29.8 28.9 24.3 24.4 19.5
K.W. 2.2 3.6 2.1 2.2 2.3 2.1 2.9 2.1 2.2 2.3 2.1 2.1 2.1 2.2 2.3

T.C. 23.3 21.5 25.9 28.6 32.3 25.5 24.6 26.8 29.4 33.0 27.6 27.7 27.7 30.2 33.8
S.C. 24.0 22.2 19.3 19.5 15.9 26.3 25.1 21.5 21.5 17.3 28.5 28.0 23.7 23.5 18.8
K.W. 2.5 3.6 2.5 2.6 2.6 2.5 3.1 2.5 2.6 2.6 2.5 2.5 2.5 2.6 2.6

T.C. 22.4 11.2 24.3 26.1 29.5 24.4 23.7 25.2 27.3 30.4 26.3 26.2 26.0 28.5 31.4
S.C. 23.2 22.6 19.0 18.2 14.6 25.2 24.8 21.0 20.4 16.3 27.2 27.1 23.0 22.5 18.1
K.W. 2.9 3.6 2.9 3.0 3.0 2.9 3.2 2.9 3.0 3.0 2.9 2.9 2.9 3.0 3.0

T.C. 21.6 21.9 22.9 23.6 26.7 23.4 23.5 23.6 25.3 27.9 25.1 24.7 24.4 27.0 29.2
S.C. 22.4 22.9 18.7 16.9 13.3 24.2 24.5 20.5 19.3 15.3 26.0 26.2 22.3 21.6 17.4
K.W. 3.2 3.6 3.2 3.3 3.4 3.2 3.4 3.2 3.3 3.4 3.3 3.2 3.2 3.4 3.4

T.C. 20.8 22.2 21.4 21.1 23.9 22.3 23.2 22.1 23.2 25.4 23.9 23.2 22.7 25.4 26.9
S.C. 21.6 23.3 18.4 15.6 12.1 23.1 24.3 20.0 18.2 14.4 24.7 25.3 21.7 20.7 16.7
K.W. 3.5 3.6 3.6 3.7 3.7 3.6 3.6 3.6 3.7 3.7 3.6 3.6 3.6 3.7 3.8

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

MA12B FC/MC30B 1.01 1.00 1.00
MA12B FC/MC36B 1.02 1.01 1.00
MV12B MC36B 1.04 1.03 0.95
AHP36 – 1.02 1.01 1.00

AHP30 – 1.02 1.01 1.00
AV36 – 1.02 1.01 0.95
F*FP036 – 1.04 1.03 1.00
– FC/MC/PC/UC36 1.02 1.01 1.00
– HC36 1.02 1.01 1.00
– HD36 1.02 1.01 1.00

T.C. S.C. KW

Variable Speed
Furnace

PV8*A12 FC/MC/PC30A 1.02 1.01 1.00
PV9*A12 FC/MC/PC30A 1.02 1.01 1.00
PV8*B16 FC/MC/PC30B 1.02 1.01 1.00
P(C,V)9*B12 FC/MC/PC30B 1.02 1.01 1.00
PV8*A12 FC/MC/PC36A 1.04 1.03 0.95
P(C,V)9*B12 FC/MC/PC36A 1.04 1.03 0.95
PV8*B16 FC/MC/PC36B 1.04 1.03 0.95
P(C,V)9*B12 FC/MC/PC36B 1.04 1.03 0.95
PV8*C16 FC/MC/PC36C 1.04 1.03 0.95
P(C,V)9*C16 FC/MC/PC36C 1.04 1.03 0.95
PV8*B16 HC36 1.02 1.02 0.95
P(C,V)9*B12 HC36 1.02 1.02 0.95
PV8*C16 HD36 1.02 1.02 0.95
P(C,V)9*C16 HD36 1.02 1.02 0.95

Coil

T.C. S.C. KW

Unitary Products Group 11

246723-YTG-L-0807

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. CZB03611
INDOOR COIL MODEL NO. FC/MC/PC35

CONDENSER

ENTERING AIR

TEMPERATURE

65

75

85

95

105

115

125

NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.

ID CFM

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72

T.C. 32.7 33.4 31.9 34.6 38.3 34.4 34.2 32.1 35.6 38.5 36.1 34.9 32.4 36.6 38.7
S.C. 30.7 30.6 24.4 24.3 19.2 31.9 32.4 26.2 33.4 20.7 33.1 34.1 28.0 42.5 22.1
K.W. 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9

T.C. 35.5 36.2 35.4 38.9 41.7 36.8 37.3 36.0 39.8 42.2 38.1 38.4 36.6 40.6 42.6
S.C. 33.7 31.3 26.3 26.3 21.1 35.1 33.5 28.0 20.8 22.1 36.6 35.6 29.8 15.4 23.2
K.W. 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

T.C. 34.1 34.8 33.6 36.7 40.0 35.6 35.7 34.0 37.7 40.3 37.1 36.6 34.5 38.6 40.7
S.C. 32.2 31.0 25.3 25.3 20.1 33.5 32.9 27.1 27.1 21.4 34.8 34.9 28.9 29.0 22.7
K.W. 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7

T.C. 32.4 32.9 31.6 34.8 37.5 33.8 33.8 32.0 35.6 37.8 35.1 34.7 32.4 36.4 38.2
S.C. 30.5 29.7 24.4 24.6 19.4 31.8 31.4 26.1 26.3 20.6 33.0 33.1 27.8 28.0 21.8
K.W. 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2

T.C. 30.7 31.0 29.5 32.9 35.1 31.9 31.9 30.0 33.5 35.4 33.1 32.8 30.4 34.2 35.6
S.C. 28.9 28.3 23.5 23.8 18.6 30.0 29.8 25.0 25.5 19.8 31.1 31.2 26.6 27.1 21.0
K.W. 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6

T.C. 29.0 29.1 27.6 31.0 32.7 30.1 30.0 28.0 31.5 33.0 31.2 30.9 28.4 32.1 33.2
S.C. 27.3 27.0 22.6 23.0 17.8 28.3 28.2 24.0 24.6 19.0 29.3 29.5 25.5 26.2 20.2
K.W. 4.1 4.1 4.1 4.1 4.0 4.1 4.1 4.1 4.0 4.0 4.1 4.1 4.1 4.0 4.1

T.C. 27.4 27.2 25.6 29.1 30.3 28.3 28.2 26.0 29.5 30.5 29.3 29.1 26.4 29.9 30.8
S.C. 25.7 25.7 21.7 22.3 17.1 26.6 26.7 23.0 23.8 18.2 27.5 27.7 24.4 25.3 19.3
K.W. 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5

1050 1200 1350

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

MA12B FC/MC36B 1.00 1.00 1.00
MA12B FC/MC42B 1.01 1.00 1.00
MV12B MC36B 1.01 1.00 1.00
MV12B MC42B 1.01 1.01 1.00

AHP36 – 1.01 1.00 1.00
AHP42 – 1.01 1.00 1.00
AV36 – 1.01 1.00 0.95
F*FP036 – 1.01 1.01 1.00
F*FP048 – 1.02 1.01 1.00
– FC/MC/PC/UC36 1.00 1.00 1.00
– FC/MC/PC/UC42 1.01 1.00 1.00
– HC36 1.01 1.00 1.00
– HD36 1.00 1.00 1.00

T.C. S.C. KW

Variable Speed
Furnace

PV8*A12 FC/MC/PC36A 0.98 0.98 1.00
PV9*A12 FC/MC/PC36A 1.00 1.00 1.00
PV8*B16 FC/MC/PC36B 1.01 1.00 1.00
P(C,V)9*B12 FC/MC/PC36B 1.00 1.00 1.00
PV8*C16 FC/MC/PC36C 1.01 1.00 1.00
PV8*C20 FC/MC/PC36C 1.01 1.00 1.00
P(C,V)9*C16 FC/MC/PC36C 1.00 1.00 1.00
P(C,V)9*C20 FC/MC/PC36C 1.00 1.00 1.00
PV8*B16 FC/MC/PC42B 1.03 1.03 1.00
P(C,V)9*B12 FC/MC/PC42B 1.01 1.01 1.00
PV8*C16 FC/MC/PC42C 1.03 1.03 1.00
PV8*C20 FC/MC/PC42C 1.03 1.03 1.00
PV8*B16 HC36 1.01 1.00 1.00
P(C,V)9*B12 HC36 1.01 1.00 1.00
PV8*C16 HD36 1.01 1.00 1.00
P(C,V)9*C16 HD36 1.01 1.00 1.00
P(C,V)9*C20 HD36 1.01 1.00 1.00

Coil

T.C. S.C. KW

12 Unitary Products Group

246723-YTG-L-0807

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. CZB04211
INDOOR COIL MODEL NO. FC/MC/PC/UC48

CONDENSER

ENTERING AIR

TEMPERATURE

65

75

85

95

105

115

125

NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.

ID CFM

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72

T.C. 36.0 38.4 36.8 40.5 45.9 38.2 39.0 38.3 41.8 46.9 40.3 39.5 39.7 43.2 47.9
S.C. 35.9 34.7 29.1 28.6 22.1 38.1 37.8 31.5 30.8 23.4 40.3 40.9 33.9 33.1 24.8
K.W. 3.3 3.3 3.3 3.3 3.4 3.3 3.3 3.3 3.3 3.4 3.3 3.3 3.3 3.3 3.4

T.C. 38.9 40.1 40.9 43.9 49.3 40.7 41.2 42.0 45.3 50.7 42.6 42.3 43.1 46.8 52.0
S.C. 38.9 34.9 30.1 29.4 23.4 40.8 37.8 32.5 31.7 24.8 42.6 40.8 34.9 34.1 26.3
K.W. 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9

T.C. 37.5 39.3 38.9 42.2 47.6 39.5 40.1 40.1 43.6 48.8 41.4 40.9 41.4 45.0 49.9
S.C. 37.4 34.8 29.6 29.0 22.8 39.4 37.8 32.0 31.3 24.1 41.4 40.8 34.4 33.6 25.5
K.W. 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1

T.C. 35.5 37.0 36.7 39.9 44.8 37.2 37.9 37.7 41.0 45.8 39.0 38.8 38.8 42.1 46.8
S.C. 35.4 33.6 28.6 27.9 21.8 37.2 36.3 30.9 30.2 23.2 38.9 38.9 33.2 32.5 24.5
K.W. 3.6 3.6 3.6 3.6 3.7 3.6 3.6 3.6 3.6 3.7 3.6 3.6 3.6 3.6 3.7

T.C. 33.5 34.7 34.5 37.5 42.0 35.0 35.7 35.3 38.4 42.8 36.5 36.7 36.2 39.3 43.6
S.C. 33.4 32.5 27.5 26.9 20.8 34.9 34.8 29.7 29.1 22.2 36.5 37.1 31.9 31.3 23.6
K.W. 4.1 4.1 4.1 4.2 4.2 4.1 4.1 4.1 4.2 4.2 4.1 4.1 4.1 4.2 4.2

T.C. 31.6 32.5 32.3 35.3 39.2 32.9 33.6 33.0 35.9 39.9 34.2 34.7 33.7 36.6 40.5
S.C. 31.5 31.3 26.5 25.9 19.9 32.8 33.3 28.6 28.1 21.2 34.0 35.3 30.7 30.3 22.6
K.W. 4.6 4.6 4.6 4.7 4.7 4.6 4.6 4.6 4.7 4.7 4.7 4.7 4.6 4.7 4.7

T.C. 29.7 30.3 30.2 33.0 36.5 30.7 31.8 30.7 33.4 37.0 31.8 32.7 31.2 33.8 37.5
S.C. 29.6 30.2 25.5 24.8 18.9 30.6 31.8 27.5 27.0 20.3 31.6 33.5 29.5 29.2 21.7
K.W. 5.2 5.1 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2

1200 1400 1600

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

MA16C FC/MC48C 1.00 1.00 1.00
MA14D FC/MC48D 1.00 1.00 1.00
MV16C MC48C 1.01 1.00 1.00
MV20D MC48D 1.01 1.00 1.00

AHP/SHP48 – 1.01 1.00 1.00
AHP/SHP60 – 1.01 1.00 1.00
AV/SV48 – 1.01 1.00 0.95
F*FP048 – 1.00 1.00 1.00
– HC60 0.98 0.98 1.00
– HD60 0.97 0.97 1.00

T.C. S.C. KW

Variable Speed
Furnace

PV8*C16 FC/MC/PC48C 1.00 1.00 1.00
PV8*C20 FC/MC/PC48C 1.00 1.00 1.00
P(C,V)9*C16 FC/MC/PC48C 1.00 1.00 1.00
P(C,V)9*C20 FC/MC/PC48C 1.00 1.00 1.00
P(C,V)9*D20 FC/MC/PC48D 1.00 1.00 1.00
PV8*C20 HC60 0.98 0.98 1.00
P(C,V)9*C20 HC60 0.98 0.98 1.00
PV8*C16 HD60 0.98 0.98 1.00
PV8*C20 HD60 0.98 0.98 1.00
P(C,V)9*C16 HD60 0.98 0.98 1.00
P(C,V)9*C20 HD60 0.98 0.98 1.00
P(C,V)9*D20 HD60 0.98 0.98 1.00

Coil

T.C. S.C. KW

Unitary Products Group 13

246723-YTG-L-0807

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. CZB04811
INDOOR COIL MODEL NO. FC/MC/PC/UC60

CONDENSER

ENTERING AIR

TEMPERATURE

65

75

85

95

105

115

125

NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.

ID CFM

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72

T.C. 43.3 45.9 42.8 48.1 55.4 45.5 46.7 43.4 49.0 54.8 47.7 47.5 44.0 49.9 54.3
S.C. 39.3 43.5 33.0 34.3 27.3 41.5 44.4 35.4 36.7 28.5 43.7 45.3 37.7 39.1 29.7
K.W. 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 4.0 3.9 3.9 3.9 4.0 4.0 3.9

T.C. 48.0 49.5 47.8 53.7 57.7 50.0 50.7 48.6 54.2 58.2 52.1 51.9 49.3 54.8 58.7
S.C. 43.5 42.5 35.8 36.2 28.6 45.2 45.3 38.2 38.6 30.2 46.9 48.2 40.5 41.0 31.8
K.W. 3.3 3.4 3.3 3.4 3.4 3.3 3.4 3.3 3.4 3.4 3.3 3.4 3.3 3.4 3.4

T.C. 45.6 47.7 45.3 50.9 56.6 47.8 48.7 46.0 51.6 56.5 49.9 49.7 46.7 52.3 56.5
S.C. 41.4 43.0 34.4 35.3 27.9 43.3 44.9 36.8 37.7 29.3 45.3 46.8 39.1 40.1 30.7
K.W. 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.7 3.6 3.6 3.6 3.6 3.7 3.6

T.C. 43.3 44.9 42.4 47.9 52.4 45.2 45.9 43.1 48.5 52.4 47.0 46.9 43.8 49.1 52.4
S.C. 39.3 40.5 33.3 34.2 26.7 41.0 42.3 35.4 36.5 28.1 42.7 44.2 37.5 38.8 29.5
K.W. 4.2 4.2 4.1 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.3 4.2

T.C. 41.0 42.0 39.5 44.8 48.2 42.6 43.1 40.2 45.4 48.2 44.1 44.1 40.8 45.9 48.3
S.C. 37.1 38.1 32.1 33.0 25.5 38.6 39.8 34.0 35.3 26.9 40.1 41.6 35.9 37.6 28.3
K.W. 4.7 4.8 4.7 4.8 4.8 4.7 4.7 4.7 4.8 4.8 4.7 4.7 4.7 4.8 4.8

T.C. 38.8 39.3 36.7 41.9 44.1 40.0 40.3 37.3 42.3 44.2 41.2 41.4 38.0 42.8 44.3
S.C. 35.0 35.7 31.0 32.0 24.2 36.3 37.4 32.7 34.2 25.7 37.5 39.1 34.4 36.5 27.2
K.W. 5.2 5.3 5.2 5.3 5.4 5.2 5.3 5.2 5.3 5.4 5.2 5.3 5.3 5.4 5.4

T.C. 36.6 36.5 33.9 38.9 40.0 37.5 37.6 34.5 39.3 40.2 38.4 38.6 35.1 39.7 40.3
S.C. 33.0 33.3 29.8 30.9 23.0 34.0 34.9 31.3 33.1 24.5 35.0 36.5 32.8 35.3 26.0
K.W. 5.8 5.8 5.8 5.9 5.9 5.8 5.8 5.8 5.9 5.9 5.8 5.8 5.8 5.9 5.9

1400 1600 1800

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

MA20D FC/MC60D 1.00 1.00 1.00
MA16C FC60C 1.00 1.00 1.00
MV20D MC60D 1.01 1.00 1.00

AHP/SHP48 – 1.01 1.00 1.00
AHP/SHP60 – 1.01 1.00 1.00
AV/SV48 – 1.00 1.00 0.98
AV/SV60 – 1.00 1.00 0.95
F*FV060 – 1.02 1.01 1.00
– HC60 1.00 1.00 1.00
– HD60 1.00 1.00 1.00

T.C. S.C. KW

Variable Speed
Furnace

P(C,V)9*D20 FC/MC/PC60D 1.01 1.00 1.00
P(C,V)9*C20 FC/PC60C 1.01 1.00 1.00
PV8*C20 HC60 1.011.001.00
P(C,V)9*D20 HC60 1.01 1.00 1.00
PV8*C20 HD60 1.011.001.00
P(C,V)9*D20 HD60 1.01 1.00 1.00
P(C,V)9*C20 MC60D 1.01 1.00 1.00

Coil

T.C. S.C. KW

14 Unitary Products Group

246723-YTG-L-0807

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. CZB06011
INDOOR COIL MODEL NO. FC/MC/PC/UC60

CONDENSER

ENTERING AIR

TEMPERATURE

65

75

85

95

105

115

125

NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.

ID CFM

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72

T.C. 51.8 52.8 50.6 57.9 61.8 52.8 54.2 52.5 58.6 63.1 53.8 55.6 54.3 59.3 64.4
S.C. 39.4 48.8 44.1 39.1 30.3 42.1 52.3 44. 41.1 31.7 44.7 55.9 48.5 43.2 33.1
K.W. 4.6 4.6 4.5 4.7 4.8 4.6 4.6 4.6 4.7 4.8 4.6 4.7 4.6 4.8 4.8

T.C. 55.1 56.9 53.6 61.5 65.7 56.1 58.3 55.4 62.6 66.5 57.0 59.7 57.3 63.7 67.2
S.C. 41.1 50.2 44.4 40.8 31.3 43.4 53.1 46.0 43.1 32.6 45.6 56.0 49.3 45.5 33.9
K.W. 4.0 4.0 3.9 4.0 4.1 4.0 4.0 3.9 4.0 4.1 4.0 4.0 3.9 4.0 4.1

T.C. 53.5 54.8 52.1 59.7 63.8 54.5 56.2 54.0 60.6 64.8 55.4 57.7 55.8 61.5 65.8
S.C. 40.3 49.5 44.0 39.9 30.8 42.7 52.7 45.9 42.1 32.2 45.2 55.9 48.7 44.3 33.5
K.W. 4.3 4.3 4.2 4.4 4.4 4.3 4.3 4.3 4.4 4.5 4.3 4.3 4.3 4.4 4.5

T.C. 49.9 51.3 49.3 56.1 59.7 50.8 52.6 51.0 57.0 60.6 51.6 53.9 52.7 57.9 61.5
S.C. 38.6 47.0 43.1 38.5 29.3 40.8 49.9 44.1 40.8 30.6 43.1 52.8 48.4 43.1 31.9
K.W. 5.0 5.0 4.9 5.1 5.2 5.0 5.0 5.0 5.1 5.2 5.0 5.0 5.0 5.1 5.2

T.C. 46.4 47.7 46.5 52.4 55.6 47.1 48.9 48.1 53.4 56.4 47.8 50.1 49.6 54.4 57.2
S.C. 36.9 44.6 40.7 37.2 27.8 39.0 47.1 41.7 39.5 29.1 41.0 49.7 43.6 41.8 30.4
K.W. 5.7 5.7 5.7 5.8 5.9 5.7 5.7 5.7 5.8 5.9 5.7 5.7 5.7 5.8 5.9

T.C. 42.9 44.3 43.8 48.9 51.7 43.5 45.3 45.2 49.9 52.3 44.2 46.4 46.6 50.9 52.9
S.C. 35.2 42.2 37.9 35.8 26.4 37.1 44.4 39.0 38.2 27.6 39.0 46.6 40.2 40.5 28.8
K.W. 6.4 6.4 6.3 6.5 6.6 6.4 6.4 6.4 6.5 6.6 6.4 6.4 6.4 6.5 6.6

T.C. 39.5 40.8 41.1 45.4 47.7 40.0 41.8 42.3 46.4 48.2 40.5 42.7 43.5 47.5 48.7
S.C. 33.6 39.9 36.0 34.5 25.0 35.3 41.7 35.4 36.9 26.1 37.0 43.6 36.6 39.3 27.3
K.W. 7.1 7.1 7.0 7.1 7.3 7.1 7.1 7.1 7.2 7.3 7.1 7.1 7.1 7.2 7.3

1600 1800 2000

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

MA20D FC/MC60D 1.00 1.00 1.00
MA20D MC61 1.00 1.00 1.00
MV20D MC60D 1.00 1.00 1.00
MV20D MC61D 1.03 1.03 1.00

AHP/SHP60 – 1.00 1.00 1.00
AV/SV60 – 1.02 1.02 0.98
F*FV060 – 1.02 1.02 1.00
– HC60 1.00 1.00 1.00
– HD60 1.00 1.00 1.00
– MC61 1.00 1.00 1.00

T.C. S.C. KW

Variable Speed
Furnace

P(C,V)9*D20 FC/MC/PC60D 0.99 0.98 1.00
PV8*C20 FC/PC60C 1.00 1.00 1.00
P(C,V)9*C20 FC/PC60C 0.99 0.98 1.00
PV8*C20 HC60 0.99 0.98 1.00
P(C,V)9*D20 HC60 0.99 0.98 1.00
PV8*C20 HD60 0.99 0.98 1.00
P(C,V)9*D20 HD60 0.99 0.98 1.00
PV8*C20 MC60D 1.00 1.00 1.00
P(C,V)9*C20 MC60D 0.99 0.98 1.00
PV8*C20 MC61D 1.01 1.01 1.00
P(C,V)9*C20 MC61D 1.01 1.01 1.00
P(C,V)9*D20 MC61D 1.01 1.01 1.00

Coil

T.C. S.C. KW

Unitary Products Group 15

NOTES

Subject to change without notice. Printed in U.S.A. 246723-YTG-L-0807
Copyright © by Unitary Products Group. 2007. All rights reserved. Supersedes: 246723-YTG-K-0507

Unitary 5005 Norman
Products York OK
Group Drive 73069