Yokogawa YPC4000 Data sheet

General
Specifications

YPC4000 is a combination Calibrator / HART® Communicator
that reduces the time spent on field calibrations and the number
of instruments that have to be carried into the field. The
YPC4000 Series delivers the versatility of a modular calibrator
and the convenience of HART® communications in one handheld
unit. Users can view up to four measurements simultaneously on
the high resolution LCD or compare HART® PV and AO values to
corresponding values measured. Available sensor modules
include a variety of differential, gauge, vacuum and absolute
pressure (for EJA/EJX) as well as temperature (for YTA. A
voltage and current meter is integral to the base unit. All HART®
field devices can be configured, polled, and trimmed using
HART® communications. Device Specific commands for
supported devices are included.

FEATURES & ADVANTAGES

USER INTERFACE – 2.6” x 2.6” display, four soft keys (definitions

change with mode requirements) and eight hard keys provide user
interface. Display is configurable for 1 to 4 simultaneous
measurements.
MODULES – select from a variety of positive lock measurement
modules for excellent versatility.
FIELD RECERTIFICATION – sensor modules and integral V / I can
be recalibrated for zero, span, & linearity through the base unit.
MEASUREMENT UNITS – customary English and Metric System
units are selectable
USER CONVENIENCE – Auto shut off, Damping, Min/Max value
capture, display Hold, sensor Zero, direct Contrast adjustment &
tare.
SECURITY LOCKOUT – YPC4000 settings can be locked out
entirely or by specific feature.
DIAGNOSTICS – YPC4000 self-tests upon power up and upon
installation of sensor modules. Advisories are posted on the
display.
FIELD UPDATES – uses Internet downloads to update and add
capability / HART® support

DEDICATED DOF MEMORY – Memory for 500 HART® profiles.
ALL-IN-ONE TOOL – takes the place of multiple handheld

instruments, simplifies workload and improves productivity
DOCUMENTING – Documenting memory and firmware for use
with DMS software. Stores up to 200 HART® configuration files
and over 100 calibration results (as-found & as-left data [up to 21
points each], time/date info, tag). Communicate with PC via DB-9
connector.
INTRINSIC SAFETY – Class I, Div I areas per CSA 22.2 & UL
913 by MET Laboratories .
OPTIONAL DMS SOFTWARE – The Device Management
System software is a full feature software tool for calibration and
configuration management of smart and conventional field
devices. DMS provides user-friendly navigation and organization
of field devices, scheduling of calibration procedures, and
storage of smart field device configuration data.

The calibration management features are extended to the
Calibration / Configuration equipment as well. Calibration
and configuration change reporting, certificates, and
device history are standard features in DMS.

SPECIFICATIONS

BASE UNIT: 9.00"L x 4.70"W x 3.58"D ABS plastic case with

shock absorbing boot, 28 ozs, three bays for measurement
modules

DISPLAY: 128 x 128 pixel graphic display, 2.6” x 2.6”
viewable area, 5-digit resolution
POWER: 6 AA alkaline or NiMH batteries; optional 100
– 240 Vac power adapter

TEMPERATURE RANGE: Storage:-40°F to 140°F (-40°C to
60°C) Operating: 23°F to 122 F (-5°C to 50°C)

CONNECTIONS: Pressure: 1/8” FNPT, 316ss Electrical:
Std. banana jacks (¾” center) for ±50 mA/Volts, HART® &
Loop leads Data transfer: DB-9 for RS-232C

NIST TRACEABLE ACCURACY:

Pressure: ± 0.025% to ± 0.10% of F.S including all effects of
linearity, repeatability, hysteresis and temperature over the
range 23° F to 122° F.
Current / Voltage: ± 0.025% of F.S. ± 0.001%
of Span per ° F (ref. temp. 70° F).

PRESSURE MODULE LIMITS / MEDIAS: GI / AI modules:
2X range / 316ss compatible DN modules: 2X range when
pressurized on high side only, 150 PSI when applied
simultaneously to high and low sides / dry gases only

MODULES: 2.3”L x 1.3”W x 2.6”D, 8.3 ozs or less. Positive­lock with spring latch. Depress latch to release. Electrical
connections are PC board contacts to spring loaded receivers
on base unit. Cap plugs protect any empty bay(s).

Model YPC4000
Portable Modular Calibrator with HART®
Communications

YPC 4000 Multifunction Calibrator

YPC BASE UNIT MODEL NUMBERS (includes CE mark, standard test lead kit and six AA alkaline batteries)

YPC 4000

Calibrator - Base unit wit three (3) modular sensor bays - see available sensor modules on next page;

use VMA0055 for 24Vdc loop supply

YPC 4010

HART® Communicator / Calibrator - Base calibrator unit with HART® capability (includes HART® leads, and

250 ohm resistor) - see available sensor modules on next page ; use VMA0055 for 24Vdc loop supply

Code

Reserved

-01

Yokogawa Corporation of America

Code

Documenting Options

-1

Standard documenting (as-found & as-left, requires DMS database software sold separately)

Code

Certification Options

-00

CE Mark standard on all models

-01

Intrinsic Safety certification by MET Laboratories per

C22.2 No. 157, and UL913, Fifth Edition Rev. 2/21/97 for Class I, Div I, Groups A,

B, C, & D

Code

Carry-Case and Strap Options

-0

Rear hand Strap

-1

Soft Carry-Case

-2

YPC Shoulder Strap

Code

YPC/ Manual Language options

-01

English language

Code

Download Subscription Options

-0 Not required

-1 Standard 3-year DOF Download (YPC4010)

YPC4010

-01

-1

-01

-0

-01

-1

YPC4010 base calibrator with HART® - standard documenting - Intrinsic Safety – Rear hand Strap – English – Standard 3 year DOF