YJACK™ Series - Bluetooth® Sensing Technology
67060, 67061, 67062, 67063, 67070, 67071, 40877
Quick Start Guide
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
1.
Power on YJACK™ devices and place in desired locations throughout
jobsite.
Rem
elem
Press and hold the power
to power the YJACK™ devices
on. Release the power button
when the status indicator LED
illuminates.
*YJACK
illuminate to indicate the number of YJACK™
and P51-870 TITAN® devices within range.
PATH™ numeric LEDs 1-8 will
button
ent. Form wand to desired shape and
place within ventilation system or wherever
ove black vinyl cap covering sensing
psychrometric data is desired.
Utilize flexible strap to tightly secure
strap clamp to pipe surface wher
temperature measurements are desired.
ess clamp handle to open clamp
Depr
jaws and attach clamp to pipe surface
e temperature measurements are
wher
desired.
e
2
Launch the YJACK VIEW™ app and select the devices you would like to
.
di
splay within the app. There is no Bluetooth® pairing required.
Utilize the session
enu to quickly
m
navigate between
differ
ent session
types.
Utilize the app settings
m
enu to easily change
gener
al settings, select
refrigerants, set elevation,
and create datalogs.
Tap the grey banners to
expand or collapse data
sets.
Tap on each data
view to select
device to be
displayed and
desired view type.
3.
Power on your P51-870 TITAN® digital manifold and select from any available
Y
JACK™ devices to be displayed on screen (requires P51-870 TITAN®
rmware update v2.0 or later). There is no Bluetooth® pairing required.
fi
Tap at the center of the gauge or graph
to switch between pressure,
temperature, & psychrometric data.
Tap within the grey box to assign a
measurement device.
Tap a specific local or YJACK™
measurement device within the list for
assignment and tap the BACK button
to return to the previous screen.
When finished, power devices off and store in a dry, temperature controlled
4.
area.
*Storing your YJACK™ device in extreme cold or heat
can severely limit the battery life. Excessive exposure
to high humidity may cause damage over time.
Always replace the vinyl cap
on your YJACK DEW™ to
prevent moisture ingression
and potential damage to the
sensing element.
To power off a YJACK™ device, press and
hold the power button until the status indicator
LED is no longer illuminated.
For additional information, please see the digital YJACK™ user manual located
at www.yellowjacket.com. Visit the app store or follow the QR codes below to
download the YJACK VIEW™ app.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Loading...