Yealink SIP-T56A User Manual
Smart Media Phone
SIP-T56A
www.yealink.com
Quick Start Guide (V83.5)
Applies to firmware version 58.83.0.1 or later.
Package Contents
The following items are included in your package. If you find anything missing, contact your system
administrator.
Handset Cord
HandsetIP Phone
Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved
third-party accessories may result in reduced performance.
Quick Start Guide
Ethernet Cable
(2m CAT5E FTP cable)
（Optional）
Stand
Wall Mount BracketPower Adapter
（Optional）
Assembling the Phone
1. Attach the stand, as shown below:
40
45
2. Attach the optional wall mount bracket, as shown below:
PUSH
Note:
The reversible tab has a lip which allows the handset to stay on-hook when the IP phone is mounted
vertically. For more information, refer to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones.
1
3. Connect the handset and optional headset, as shown below:
ＤＣ５Ｖ
ＰＣ
Ｉｎｔｅｒｎｅｔ
Note:
The headset should be purchased separately.
4. Connect the optional USB flash drive, as shown below:
The USB port (on the rear of the phone) can also be used to connect color-screen expansion module EXP50,
Note:
USB headset or DECT dongle kit DD10K. For more information on how to use EXP50, refer to Yealink EXP50
User Guide. For more information on how to use USB headset, refer to the documentation from the
manufacturer. For more information on how to use DD10K, refer to Yealink SIP-T58V & T58A & T56A Smart
Media Phones User Guide.
5. Connect the AC power or PoE, as shown below:
Power Adapter
(DC 5V)
ＤＣ５Ｖ
ＰＣ
A
AC Power Option
B
PoE ( Power over
Ethernet ) Option
IEEE 802.3af compliant
PoE Hub/Switch
Note: The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party
power adapter may cause the damage to the phone.
Ｉｎｔｅｒｎｅｔ
ＤＣ５Ｖ
ＰＣ
Ｉｎｔｅｒｎｅｔ
2
6. Connect to the network, as shown below:
You have two options for network connection. You can select one of them according to the current office
environment.
a) Connect to the wired network:
PC
PC Connection
(Optional)
ＤＣ５Ｖ
ＰＣ
Ｉｎｔｅｒｎｅｔ
Note: If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by
Yealink.
b) Connect to the wireless network:
1) Swipe down from the top of the screen to enter the control center.
2) Tap Setting->Basic->Wi-Fi.
3) Tap the On radio box in the Wi-Fi field.
The phone will automatically search for available
wireless
4) Select an available
network from the list of networks.
wireless
networks in your area.
5) If the network is secure, enter its password in the Password field.
6) Tap Connect to connect to the wireless network.
3
Loading...