Yealink EHS36 User Manual
The following figure shows the connection between the IP
phone and the Sennheiser wireless headset.
RJ12 Cord
Wireless Headset Adapter
Sennheiser
2
1
wireless
headset
Sennheiser Y-Cord
Note: The sennheiser wireless headset must be running the latest firmware
of the DW-Office series (version 96 or later) !
The following figure shows the connection between the IP
phone and the the Plantronics wireless headset.
RJ12 Cord
3.5 mm DC Jack
Plantronics
3
1
wireless
headset
——EHS36
This cord is provided by Plantronics.
We reserve the right to improve or change the product and the user guide without notice.
You can also download this user guide from:
http://www.yealink.com/SupportDownloadfiles_detail.aspx?ProductsID=72&CateID=195&flag=142
Copyright 2014 YEALINK NETWORK TECHNOLOGY CO.,LTD.
c
www.yealink.com
User Guide
(V1.3)
Introduction
The Wireless Headset Adapter——EHS36, is perfect for
connecting Yealink
T26P IP phones and wireless headsets, such as Sennheiser/
Jabra(GN Netcom) and Plantronics headsets.
SIP-
T48G/T46G/T42G/T41P/T38G/T28P/
Port : Connect this port and the
2
Jabra(GN Netcom)
/
Sennheiser Wireless headset using the RJ45 cord.
Port : Connect this port and the Plantronics Wireless
3
headset using the 3.5 mm DC jack.
Cord Description
Packaging Contents
3.5 mm
DC Jack
EHS36
RJ45 Cord RJ12 Cord
Port Description
RJ9 Cord
1
User Guide
Sennheiser Y-Cord
In addition to the cords mentioned in the Port Description
section, the RJ9 Cord and the Sennheiser Y-Cord are also
provided.
RJ9 Cord: For the audio connection between the IP phone
headset port and the
Jabra (GN Netcom)
wireless headset.
Sennheiser Y-Cord: For the audio connection between the
IP phone headset port, Wireless Headset Adapter and the
Sennheiser wireless headset.
Connecting IP Phone and Headset
This section introduces the connection between SIP-T48G/
T46G/T42G/T41P/T38G/T28P/T26P IP phones and the wireless
headset. The following figures take the SIP-T28P/T26P IP phone
as an example.
The following figure shows the connection between the IP
phone and the Jabra (GN Netcom) wireless headset.
RJ45 Cord RJ12 Cord
3
Port : Connect this port and the IP phone EXT/EHS port
1
or Expansion Module EXT port (the expansion
module has been connected to the phone) using
the RJ12 cord.
EHS36 User Guide
2
Jabra
(GN Netcom)
wireless
headset
2
1
RJ9 Cord
www.yealink.com
Loading...